Export limit exceeded: 18656 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18656 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23399 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nf_tables: nft_dynset: fix possible stateful expression memleak in error path If cloning the second stateful expression in the element via GFP_ATOMIC fails, then the first stateful expression remains in place without being released. unreferenced object (percpu) 0x607b97e9cab8 (size 16): comm "softirq", pid 0, jiffies 4294931867 hex dump (first 16 bytes on cpu 3): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 backtrace (crc 0): pcpu_alloc_noprof+0x453/0xd80 nft_counter_clone+0x9c/0x190 [nf_tables] nft_expr_clone+0x8f/0x1b0 [nf_tables] nft_dynset_new+0x2cb/0x5f0 [nf_tables] nft_rhash_update+0x236/0x11c0 [nf_tables] nft_dynset_eval+0x11f/0x670 [nf_tables] nft_do_chain+0x253/0x1700 [nf_tables] nft_do_chain_ipv4+0x18d/0x270 [nf_tables] nf_hook_slow+0xaa/0x1e0 ip_local_deliver+0x209/0x330 | ||||
| CVE-2026-23389 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory leak in ice_set_ringparam() In ice_set_ringparam, tx_rings and xdp_rings are allocated before rx_rings. If the allocation of rx_rings fails, the code jumps to the done label leaking both tx_rings and xdp_rings. Furthermore, if the setup of an individual Rx ring fails during the loop, the code jumps to the free_tx label which releases tx_rings but leaks xdp_rings. Fix this by introducing a free_xdp label and updating the error paths to ensure both xdp_rings and tx_rings are properly freed if rx_rings allocation or setup fails. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-23374 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blktrace: fix __this_cpu_read/write in preemptible context tracing_record_cmdline() internally uses __this_cpu_read() and __this_cpu_write() on the per-CPU variable trace_cmdline_save, and trace_save_cmdline() explicitly asserts preemption is disabled via lockdep_assert_preemption_disabled(). These operations are only safe when preemption is off, as they were designed to be called from the scheduler context (probe_wakeup_sched_switch() / probe_wakeup()). __blk_add_trace() was calling tracing_record_cmdline(current) early in the blk_tracer path, before ring buffer reservation, from process context where preemption is fully enabled. This triggers the following using blktests/blktrace/002: blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed] runtime 0.367s ... 0.437s something found in dmesg: [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 ... (See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message) [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 [ 81.362895] check_preemption_disabled+0xce/0xe0 [ 81.362902] tracing_record_cmdline+0x10/0x40 [ 81.362923] __blk_add_trace+0x307/0x5d0 [ 81.362934] ? lock_acquire+0xe0/0x300 [ 81.362940] ? iov_iter_extract_pages+0x101/0xa30 [ 81.362959] blk_add_trace_bio+0x106/0x1e0 [ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0 [ 81.362979] ? lockdep_init_map_type+0x58/0x260 [ 81.362988] submit_bio_wait+0x56/0x90 [ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250 [ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10 [ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0 [ 81.363051] blkdev_read_iter+0xc1/0x140 [ 81.363059] vfs_read+0x20b/0x330 [ 81.363083] ksys_read+0x67/0xe0 [ 81.363090] do_syscall_64+0xbf/0xf00 [ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 81.363106] RIP: 0033:0x7f281906029d [ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec [ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d [ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000 [ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000 [ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000 [ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a [ 81.363142] </TASK> The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(), and blk_add_trace_rq() paths as well. The purpose of tracin ---truncated--- | ||||
| CVE-2026-23330 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: complete pending data exchange on device close In nci_close_device(), complete any pending data exchange before closing. The data exchange callback (e.g. rawsock_data_exchange_complete) holds a socket reference. NIPA occasionally hits this leak: unreferenced object 0xff1100000f435000 (size 2048): comm "nci_dev", pid 3954, jiffies 4295441245 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc ec2b3c5): __kmalloc_noprof+0x4db/0x730 sk_prot_alloc.isra.0+0xe4/0x1d0 sk_alloc+0x36/0x760 rawsock_create+0xd1/0x540 nfc_sock_create+0x11f/0x280 __sock_create+0x22d/0x630 __sys_socket+0x115/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0x117/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-23313 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix preempt count leak in napi poll tracepoint Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead. | ||||
| CVE-2026-23302 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: annotate data-races around sk->sk_{data_ready,write_space} skmsg (and probably other layers) are changing these pointers while other cpus might read them concurrently. Add corresponding READ_ONCE()/WRITE_ONCE() annotations for UDP, TCP and AF_UNIX. | ||||
| CVE-2026-23255 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: add proper RCU protection to /proc/net/ptype Yin Fengwei reported an RCU stall in ptype_seq_show() and provided a patch. Real issue is that ptype_seq_next() and ptype_seq_show() violate RCU rules. ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev to get device name without any barrier. At the same time, concurrent writers can remove a packet_type structure (which is correctly freed after an RCU grace period) and clear pt->dev without an RCU grace period. Define ptype_iter_state to carry a dev pointer along seq_net_private: struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch }; We need to record the device pointer in ptype_get_idx() and ptype_seq_next() so that ptype_seq_show() is safe against concurrent pt->dev changes. We also need to add full RCU protection in ptype_seq_next(). (Missing READ_ONCE() when reading list.next values) Many thanks to Dong Chenchen for providing a repro. | ||||
| CVE-2025-38531 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: common: st_sensors: Fix use of uninitialize device structs Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] | ||||
| CVE-2025-22125 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") | ||||
| CVE-2026-23354 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/fred: Correct speculative safety in fred_extint() array_index_nospec() is no use if the result gets spilled to the stack, as it makes the believed safe-under-speculation value subject to memory predictions. For all practical purposes, this means array_index_nospec() must be used in the expression that accesses the array. As the code currently stands, it's the wrong side of irqentry_enter(), and 'index' is put into %ebp across the function call. Remove the index variable and reposition array_index_nospec(), so it's calculated immediately before the array access. | ||||
| CVE-2026-23355 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata: cancel pending work after clearing deferred_qc Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by ap->ops->qc_defer() returning non-zero before issuing the deferred qc. ata_scsi_schedule_deferred_qc() is called during each command completion. This function will check if there is a deferred QC, and if ap->ops->qc_defer() returns zero, meaning that it is possible to queue the deferred qc at this time (without being deferred), then it will queue the work which will issue the deferred qc. Once the work get to run, which can potentially be a very long time after the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns non-zero. While we hold the ap->lock both when assigning and clearing deferred_qc, and the work itself holds the ap->lock, the code currently does not cancel the work after clearing the deferred qc. This means that the following scenario can happen: 1) One or several NCQ commands are queued. 2) A non-NCQ command is queued, gets stored in ap->deferred_qc. 3) Last NCQ command gets completed, work is queued to issue the deferred qc. 4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is currently NOT canceled. 5) Port is reset. 6) One or several NCQ commands are queued. 7) A non-NCQ command is queued, gets stored in ap->deferred_qc. 8) Work is finally run. Yet at this time, there is still NCQ commands in flight. The work in 8) really belongs to the non-NCQ command in 2), not to the non-NCQ command in 7). The reason why the work is executed when it is not supposed to, is because it was never canceled when ap->deferred_qc was cleared in 4). Thus, ensure that we always cancel the work after clearing ap->deferred_qc. Another potential fix would have been to let ata_scsi_deferred_qc_work() do nothing if ap->ops->qc_defer() returns non-zero. However, canceling the work when clearing ap->deferred_qc seems slightly more logical, as we hold the ap->lock when clearing ap->deferred_qc, so we know that the work cannot be holding the lock. (The function could be waiting for the lock, but that is okay since it will do nothing if ap->deferred_qc is not set.) | ||||
| CVE-2026-23356 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off. | ||||
| CVE-2026-23357 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock in error path of mcp251x_open The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock. | ||||
| CVE-2026-23358 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix error handling in slot reset If the device has not recovered after slot reset is called, it goes to out label for error handling. There it could make decision based on uninitialized hive pointer and could result in accessing an uninitialized list. Initialize the list and hive properly so that it handles the error situation and also releases the reset domain lock which is acquired during error_detected callback. (cherry picked from commit bb71362182e59caa227e4192da5a612b09349696) | ||||
| CVE-2026-23359 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path. | ||||
| CVE-2026-23360 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin queue leak on controller reset When nvme_alloc_admin_tag_set() is called during a controller reset, a previous admin queue may still exist. Release it properly before allocating a new one to avoid orphaning the old queue. This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime"). | ||||
| CVE-2026-23363 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. | ||||
| CVE-2026-23365 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: validate USB endpoints The kalmia driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints. | ||||
| CVE-2026-23388 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases. | ||||
| CVE-2026-23387 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put. | ||||