Export limit exceeded: 402643 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 402643 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402643 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98315 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls runlist helpers that require the runlist write lock, but did not hold it while freeing clusters and truncating the runlist. Serialize those operations and the resident conversion with the runlist lock. ntfs_attr_map_cluster() can merge a newly allocated run before updating mapping pairs. If the update fails, free the clusters and restore both the in-memory runlist and on-disk mapping pairs from a saved runlist. Mark the volume in error if either rollback step fails. | ||||
| CVE-2026-98323 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length. | ||||
| CVE-2026-58068 | 2026-10-07 | N/A | ||
| This vulnerability in Veeam Agent for Microsoft Windows allows any local user to terminate arbitrary processes on the system. | ||||
| CVE-2026-19186 | 1 Zephyrproject | 1 Zephyr | 2026-10-07 | 8.1 High |
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255). The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload. The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure. Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). | ||||
| CVE-2026-92393 | 2026-10-07 | N/A | ||
| Apache YuniKorn 1.9.0 and earlier does not implement label and user annotation checks for workload UPDATE action bypassing all checks. Workloads in YuniKorn are defined as the following Kubernetes objects: "deployments", "replicasets", "statefulsets", "daemonsets", "jobs", "cronjobs". The CREATE action correctly enforces the checks for all object types. The bypass allows any user to specify an arbitrary user info annotation. The same bypass also allows changing the application ID for the workload. The combination of the two applied in one UPDATE could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue. Users are recommended to upgrade to version 1.10.0, which fixes this issue. | ||||
| CVE-2026-97146 | 2026-10-07 | N/A | ||
| Apache YuniKorn 1.9.0 and earlier allows bypassing the check for the user annotation by setting a secondary label on the pod. If the pod has the label 'app=yunikorn' the checks limiting the user annotation content are not run. The label is used to identify the YuniKorn application itself in the deployments. The bypass allows any user to specify an arbitrary user info annotation. The arbitrary user information could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue. Users are recommended to upgrade to version 1.10.0, which fixes this issue. | ||||
| CVE-2026-97720 | 1 Apache | 1 Impala | 2026-10-07 | N/A |
| Incorrect implementation of JWT/OAuth authentication in Impala executors in Apache Impala versions up to and including 4.5.2 which allows attacked to access resources served by the executor's webserver when that webserver is configured to accept JWT/OAuth tokens. Bearer token (JWT) signatures are not validated resulting in the webserver accepting any valid JWT. Users are recommended to either disable JWT/OAuth auth for Impala executors or upgrade to version 4.5.3, which fixes this issue. | ||||
| CVE-2026-90466 | 1 Apache | 1 Impala | 2026-10-07 | N/A |
| Path traversal of 'trusted_jar_paths' in Impala 4.5.2 allows an attacker-controlled JAR to be loaded via a relative path where the prefix matches a path specified in 'trusted_jar_paths'. The startup flag 'trusted_jar_paths' references URIs for loading files from local or remote filesystems. Path traversal can't override the schema, but can result in loading a JAR that has been uploaded to a different location in that filesystem via Impala DDLs such as CREATE DATA SOURCE and CREATE TABLE. Path traversal can only be used if a trusted path exists, so this attack requires 'trusted_jar_paths' have a non-empty value configured by the Impala admin. Users are recommended to upgrade to version 4.5.3, which fixes this issue. | ||||
| CVE-2026-98229 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final drop callback reports the current state's protocol. If secpath_reset() drops the last state reference while the state is concurrently deleted, xfrm_input() can still dereference the freed state when selecting transport_finish() or reporting the drop callback protocol. Save the state protocol on the stack while the state is still valid, and use the already saved address family for transport_finish(). A larval XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This preserves the existing drop-path fallback while avoiding the post-reset state dereferences without adding an extra state reference to every received packet. | ||||
| CVE-2026-98349 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() and the libipw_network_init() call it makes assume the frame contains the full 36-byte beacon and probe response prefix, but the ipw2100 and ipw2200 receive paths only establish that a management frame carries the generic 24-byte three-address header. libipw_network_init() then computes the information element length as stats->len - sizeof(*beacon) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() yields 65524 for a 24-byte beacon, and the parser then walks the receive buffer as if it held almost 64 KiB of information elements, reading past the allocation. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device. | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||
| CVE-2025-64392 | 1 Veeam | 1 Backup Enterprise Manager | 2026-10-07 | N/A |
| This vulnerability in Veeam Backup Enterprise Manager allows an attacker to execute script in the browser of a portal user who opens a crafted link. | ||||
| CVE-2026-103416 | 2026-10-07 | N/A | ||
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. | ||||
| CVE-2026-25273 | 1 Qualcomm | 1 Snapdragon | 2026-10-07 | 6.7 Medium |
| Memory Corruption when processing camera operations due to out-of-bounds write during driver updates. | ||||
| CVE-2026-15894 | 1 Zephyrproject | 1 Zephyr | 2026-10-07 | 8.8 High |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it. The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17. bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. | ||||
| CVE-2026-97354 | 2026-10-07 | 4.1 Medium | ||
| The PowerPress Podcasting plugin by Blubrry WordPress plugin before 11.17.11 does not validate the destination of redirects when fetching a user-supplied media URL, allowing users with the contributor role and above to perform Server-Side Request Forgery attacks against internal services. | ||||
| CVE-2026-97294 | 2026-10-07 | 6.5 Medium | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Stored XSS.This issue affects Media LIbrary Assistant: from n/a through 3.41. | ||||
| CVE-2026-97188 | 2026-10-07 | 8.8 High | ||
| The String locator WordPress plugin before 2.6.8 does not restrict the classes allowed when deserializing the content of a database row saved through its database editor, allowing unauthenticated attackers to store a serialized PHP object that is instantiated when an administrator later opens and saves that row. If a suitable POP chain is present via another installed String locator WordPress plugin before 2.6.8 or , this can lead to arbitrary file deletion, sensitive data disclosure or remote code execution. | ||||
| CVE-2026-87971 | 2026-10-07 | 7.1 High | ||
| The If-So Dynamic Content WordPress plugin before 1.10.2 does not validate the URL scheme of a request-supplied value before reflecting it into a link on an admin page, allowing attackers to execute arbitrary JavaScript in the browser of a logged-in user who opens a crafted link. | ||||
| CVE-2026-87782 | 2026-10-07 | 8.8 High | ||
| The Koinonia Link WordPress plugin before 1.1.5 does not check that a user is allowed to change roles before saving a role selection submitted with a profile update, allowing any authenticated user, such as a subscriber, to grant themselves the Administrator role. | ||||