Export limit exceeded: 23293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-103416 | 2026-10-07 | N/A | ||
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. | ||||
| CVE-2026-25273 | 1 Qualcomm | 1 Snapdragon | 2026-10-07 | 6.7 Medium |
| Memory Corruption when processing camera operations due to out-of-bounds write during driver updates. | ||||
| CVE-2026-15894 | 1 Zephyrproject | 1 Zephyr | 2026-10-07 | 8.8 High |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it. The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17. bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. | ||||
| CVE-2026-77178 | 1 Oracle | 1 Virtualbox | 2026-10-07 | 9.1 Critical |
| Oracle VM VirtualBox before 7.2.8 allows guest OS users to cause an out-of-bounds write in the host OS in pcnetReceiveNoSync in DevPCNet.cpp in the PCNet (Am79C970A) network device model. | ||||
| CVE-2026-19186 | 2026-10-07 | 8.1 High | ||
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255). The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload. The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure. Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). | ||||
| CVE-2026-73570 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-10-07 | 8.9 High |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. | ||||
| CVE-2026-77050 | 1 Djangoproject | 1 Django | 2026-10-07 | 5.3 Medium |
| An issue was discovered in Django 6.1 before 6.1.2, 6.0 before 6.0.9, and 5.2 before 5.2.18. `django.utils.translation.get_supported_language_variant()` is subject to a potential denial-of-service attack when processing many distinct, very long language codes, which are retained as keys in an in-memory cache and consume process memory. Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected. Django would like to thank Gleb Lizunov for reporting this issue. | ||||
| CVE-2026-12545 | 2 Redhat, Theforeman | 4 Satellite, Satellite Capsule, Satellite Utils and 1 more | 2026-10-07 | 6.7 Medium |
| A flaw was found in rubygem-hammer_cli. A command injection vulnerability exists in Hammer CLI and the Railties (Ruby on Rails) component distributed with Satellite due to the insecure interpolation of the $EDITOR environment variable into the Ruby system() method. By passing a single interpolated string to system(), the application invokes a system shell (/bin/sh) that interprets shell metacharacters (e.g., ;, |, &). | ||||
| CVE-2026-12542 | 2 Redhat, Theforeman | 4 Satellite, Satellite Capsule, Satellite Utils and 1 more | 2026-10-07 | 5.3 Medium |
| A flaw was found in Foreman. The foreman-tail utility is vulnerable to OS command injection due to the unsafe use of the eval command. The script takes user-supplied arguments and incorporates them directly into a string that is then executed by eval to expand file paths. Because the input is not sanitized or quoted, a local attacker can inject shell metacharacters (e.g., ;, &, |) to execute arbitrary system commands. | ||||
| CVE-2026-12541 | 2 Redhat, Theforeman | 4 Satellite, Satellite Capsule, Satellite Utils and 1 more | 2026-10-07 | 8.2 High |
| A flaw was found in Foreman. OS command injection vulnerabilities exist in the foreman-rake db:dump and db:import_dump tasks. The application fails to properly sanitize user-supplied input in the destination parameter (during backups) and the file parameter (during imports) before passing them to a Ruby system() call for execution. An attacker with permissions to execute foreman-rake (e.g., via a restricted sudo configuration) can append malicious shell commands to the provided file paths. | ||||
| CVE-2026-12540 | 2 Redhat, Theforeman | 4 Satellite, Satellite Capsule, Satellite Utils and 1 more | 2026-10-07 | 8.2 High |
| A flaw was found in Foreman. A command injection vulnerability exists in the foreman-rake errors:fetch_log task. The request_id parameter is passed to an underlying system command (typically grep) without adequate shell neutralization. While the task is intended to fetch specific log entries, an attacker with sudo permissions to execute this rake task can inject shell metacharacters (such as ;, ", or |) to break out of the intended command and execute arbitrary code. | ||||
| CVE-2026-12405 | 2 Redhat, Theforeman | 4 Satellite, Satellite Capsule, Satellite Utils and 1 more | 2026-10-07 | 8.8 High |
| A flaw was found in rubygem-foreman_remote_execution. A command injection vulnerability exists in the Red Hat Satellite API (/api/v2/job_invocations). When a job template has the effective_user property marked as overridable: true, the application fails to properly sanitize the effective_user input provided during the API request. The exploitation does not rely on the content or logic of the Job Template/playbook itself; rather, the injection occurs during the instantiation of the job execution environment by the Satellite server. An attacker with permissions to execute job templates can inject arbitrary shell commands into this parameter, which are executed on the target infrastructure with the privileges of the execution user. | ||||
| CVE-2026-78861 | 1 Mercusys | 1 Ac12 V2 | 2026-10-07 | 7.7 High |
| An issue in Mercusys AC12 V2 allows a local attacker to execute arbitrary code via a hardcoded 512-bit RSA Private Key | ||||
| CVE-2026-98236 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value mhi_mbim_rx() ignores the return value of skb_copy_bits() when it copies each datagram out of the NTB. The datagram offset and length come from the DPE, which is only checked to lie within the NTB itself, so a modem can point a datagram outside the received skb. The copy then fails and the freshly allocated skbn is passed to netif_rx() with its uninitialized contents still in place, leaking kernel heap memory into the network stack. Free the skb and account an error when the copy fails. Verified in a QEMU guest with a fault injector pointing a DPE outside the received NTB: the copy fails, and the unpatched driver hands the uninitialized skbn to the network stack (observed as "unknown protocol" on bytes that were never written). With this check the failed datagram is dropped and counted as an rx error. Changes in v2: factor the free-and-count sequence out into mhi_mbim_rx_drop(), shared with the unknown-protocol path, as suggested by Loic Poulain. | ||||
| CVE-2026-105788 | 1 Microsoft | 1 Ufo | 2026-10-07 | 8.8 High |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.10, the type_text and launch_app tools in ufo/client/mcp/http_servers/mobile_mcp_server.py pass the authenticated caller-controlled text and package_name parameters into adb shell command argument positions without comprehensive validation. The adb client joins those arguments into a remote command string that the Android shell reparses, allowing shell metacharacters to execute additional commands on an authorized connected device as the Android shell user. Exploitation requires a valid Mobile MCP API key and a reachable device authorized for ADB, and it does not establish host operating-system execution, Android root execution, or access beyond the Android shell-user privileges. This issue is fixed in version 3.0.10. | ||||
| CVE-2026-105793 | 1 Microsoft | 1 Ufo | 2026-10-07 | 9.1 Critical |
| Microsoft UFO is an open-source framework for intelligent automation across devices and platforms. Prior to 3.0.9, the press_key tool in ufo/client/mcp/http_servers/mobile_mcp_server.py accepts a free-form key_code parameter and passes it to `adb shell input keyevent`. The adb client joins the arguments into a remote command string that the Android shell reparses, allowing an authenticated Mobile MCP caller to execute additional commands as the Android shell user on an authorized connected device. Exploitation requires a valid UFO_MCP_API_KEY, adb on the host, and a reachable authorized device, and it does not establish host operating-system execution, Android root execution, or access beyond the Android shell-user privileges. This issue is fixed in version 3.0.9. | ||||
| CVE-2026-106115 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-98216 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand user space the single credit-return page that holds this context's entry. That page is the second or third page of the per-node credit-return allocation once the hardware send context index reaches 64 or 128, so the failure below is intermittent: when the entry lands on the first page the offset is zero and everything works. Two things are wrong. First, cr_page_offset is a byte offset but .va is a struct credit_return *, so adding it is pointer arithmetic and scales the offset by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or 512 KiB past a 10240-byte allocation. With an IOMMU translating, that address is inside the vmalloc range but in no vm_area, so dma_mmap_coherent() -> iommu_dma_mmap() finds no pages, vmalloc_to_pfn() returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above MAXPHYADDR. The first user read then takes: psm2_ep_open_pr: Corrupted page table at address 7a14d007e000 PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067 PTE 800049168e911235 Oops: Bad pagetable: 000d [#1] SMP PTI Second, and still wrong once the arithmetic is corrected, dma_mmap_coherent() describes a whole coherent buffer and selects the page within it with vma->vm_pgoff. Offsetting cpu_addr has no effect: for a vmap'd allocation iommu_dma_mmap() uses cpu_addr only to locate the vm_area and then maps pages[vm_pgoff], which hfi1_file_mmap() has just set to 0. User space therefore always receives the first credit-return page, every credit read is for the wrong context, and send PIO stalls forever. Use the DMA API as intended: pass the base of the allocation with its full length and select the page with vm_pgoff. A separate length is needed because memlen must keep describing the VMA for the existing size check. The dma-direct path stays correct as well, since dma_direct_mmap() adds the same vm_pgoff to the base pfn. Tested on a Dell T7610 (Xeon E5-2650 v2, Intel IOMMU in DMA-FQ mode) against a Threadripper PRO 3995WX peer, both Omni-Path 100. Before this change psm2_ep_open() Oopses the kernel; with only the arithmetic corrected psm2_ep_open() succeeds but any transfer that uses send PIO hangs, PSM2_SDMA=2 (send PIO disabled) completing normally while PSM2_SDMA=0 (send PIO only) hangs every time. With this change send PIO, send DMA and the default mixed mode all work. | ||||
| CVE-2026-105797 | 1 Microsoft | 1 Simplechat | 2026-10-07 | 8.8 High |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. In versions 0.261.003 and 0.261.027, an authorization ordering flaw in POST /api/user/plugins allows an authenticated low-privileged user to omit the top-level MCP type so that _reject_non_admin_mcp_stdio skips inspection before the type is restored from metadata. The stored personal action can then reach McpPluginFactory.create_connector, and MCPStdioPlugin.connect starts the attacker-selected operating-system process under the application service identity when the action tool is invoked. Exploitation requires personal plugins to be enabled and governance to permit MCP actions, and it can expose or modify secrets and data available to the service or disrupt the service. This issue is fixed in version 0.261.031. | ||||
| CVE-2026-106110 | 1 Sixlabors | 1 Imagesharp | 2026-10-07 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. | ||||