Export limit exceeded: 386686 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386686 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-55512 | 2026-09-04 | 5.3 Medium | ||
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. From version 0.2.0 to before version 0.5.0, when OIDC is enabled, GET /ui/oidc/login is reachable without authentication and is registered outside the Web UI rate-limited auth routes. Every request creates a fresh random OIDC state value and stores it in an in-memory map for 10m. Expired states are swept lazily, but there is no rate limit or maximum live-state cap on the allocation path. An unauthenticated remote client can therefore grow OIDC.states for the full state TTL, bounded by request throughput rather than by configured auth rate limits. This issue has been patched in version 0.5.0. | ||||
| CVE-2026-53604 | 2026-09-04 | N/A | ||
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. Prior to version 0.3.8, the web handler renderMobileBundle passes the real *pki.CAResolver directly into mobilebundle.Build. Inside Build, resolver.LoadByID decrypts the CA's ed25519 private key into a *pki.CAManager, but Build never calls CAManager.Wipe() on any return path. As a result, when a mobile-bundle request goes through the web UI and Build returns — especially on error (missing network, invalid prefix, DB error, signing failure) — the plaintext CA private key remains on the Go heap, unwiped, until garbage collection. An attacker able to read process memory (core dump, swap, memory-scraping) can recover the CA signing key, which would allow minting arbitrary host certificates for the mesh. The API handler already does this correctly: it loads the CAManager, defer caMgr.Wipe(), and wraps it in caManagerResolver. Only the web path is affected. This issue has been patched in version 0.3.8. | ||||
| CVE-2026-53603 | 2026-09-04 | N/A | ||
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. Prior to version 0.3.8, Operator session tokens are stored in plaintext in the operator_sessions table (the token column is the PRIMARY KEY). The session token is a 32-byte random hex value sent directly in a cookie and valid for 24 hours. Anyone who can read the database (backup, snapshot, file copy, or SQL-level disclosure) obtains every active session token and can hijack operator sessions directly, with no further authentication. This issue has been patched in version 0.3.8. | ||||
| CVE-2026-53602 | 2026-09-04 | N/A | ||
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. Prior to version 0.3.7, two related authorization gaps let a host that should no longer be trusted obtain a fresh, valid Nebula certificate, because nebula-mgmt does not re-evaluate revocation/authorization state at certificate issuance time — only at poll time. Firstly, the blocklist is not enforced at sign / re-enroll time. internal/api/enroll.go:128 calls caMgr.Sign(...) without consulting the blocklist. The blocklist is only checked in the poll path (internal/api/updates.go:57, fingerprintInBlocklist). The blocklist is keyed by certificate fingerprint (internal/store/sqlite.go), so a re-enrollment produces a new fingerprint that is not in the blocklist. Secondly, renewal does not re-validate operator / CA status. Auto-renewal at poll time (internal/api/updates.go:285-319, signHostCert) reads host.Name, host.Groups, host.NebulaIPs from the DB and re-signs without checking whether the owning operator is still active or the CA still valid. DisableOperator (internal/store/sqlite_operators.go) revokes sessions and API keys but does not retire the operator's CAs, and pki/signer.go checks only CA cert time-expiry, not operator/CA status. This issue has been patched in version 0.3.7. | ||||
| CVE-2026-73603 | 1 Flowiseai | 1 Flowise | 2026-09-04 | 5.3 Medium |
| Flowise before 3.1.4 fails to validate chatflow visibility in the unauthenticated text-to-speech endpoint, allowing attackers to abuse private chatflow TTS credentials. Unauthenticated attackers can generate unlimited text-to-speech audio using stored OpenAI or ElevenLabs API keys by providing a valid chatflow UUID, incurring costs on the chatflow owner's account. | ||||
| CVE-2026-47834 | 2 Spring, Vmware | 2 Spring Data Jpa, Spring Data Jpa | 2026-09-04 | 4.8 Medium |
| Spring Data JPA's Sort validation can be bypassed when parameters containing crafted payload are accepted from untrusted sources. Spring Data JPA 4.1.0 Spring Data JPA 4.0.0 - 4.0.6 Spring Data JPA 3.5.0 - 3.5.13 Spring Data JPA 3.0.0 - 3.4.15 | ||||
| CVE-2026-73602 | 1 Flowiseai | 1 Flowise | 2026-09-04 | 9.9 Critical |
| Flowise before 3.1.3 contains a sandbox escape vulnerability in the vm2 JavaScript sandbox that allows authenticated users to execute arbitrary code by exploiting moment locale validation bypass. Attackers can craft a fake String object with a match function that bypasses path traversal checks to load and execute malicious JavaScript files stored in the document store outside the sandbox. | ||||
| CVE-2026-47842 | 2 Spring, Vmware | 2 Spring Security, Spring Security | 2026-09-04 | 6.5 Medium |
| Applications using AesBytesEncryptor with the two-argument constructor or when passing a null IV generator and CBC as the encryption mode encrypt data with AES/CBC using a null (all-zero) initialization vector. Spring Security 7.1.0 Spring Security 7.0.0 - 7.0.6 Spring Security 6.5.0 - 6.5.11 Spring Security 6.4.0 - 6.4.18 Spring Security 5.8.0 - 5.8.27 Spring Security 5.7.0 - 5.7.25 | ||||
| CVE-2026-73601 | 1 Flowiseai | 1 Flowise | 2026-09-04 | 8.8 High |
| Flowise versions before 3.1.3 contain a remote code execution vulnerability in the Custom MCP node when CUSTOM_MCP_PROTOCOL is set to stdio, allowing authenticated users to execute arbitrary commands by manipulating environment variables and command arguments. Attackers can abuse PYTHONWARNINGS and BROWSER environment variables with python3, or leverage the root working directory with node to bypass validation and execute system commands. | ||||
| CVE-2026-71624 | 2026-09-04 | N/A | ||
| An issue in esoTalk v.1.0.0g4 allows a remote attacker to execute arbitrary code via the core/models/ETMemberModel.class.php, core/controllers/ETMemberController.class.php, and core/lib/ET.class.php components | ||||
| CVE-2026-59303 | 2 Spring, Vmware | 2 Spring Cloud Stream, Spring Cloud Stream | 2026-09-04 | 3.1 Low |
| Dynamic destination cache size is not properly bound in Spring Cloud Stream. Spring Cloud Stream 5.0.0 - 5.0.2 Spring Cloud Stream 4.3.0 - 4.3.3 Spring Cloud Stream 4.2.0 - 4.2.6 | ||||
| CVE-2026-80804 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: restore nofs context unconditionally in xfs_trans_roll When __xfs_trans_commit() fails in xfs_trans_roll(), the NOFS context is cleared but only restored in the success path. This leaves the error path without nofs protection, causing a circular lock dependency between xfs_nondir_ilock_class and fs_reclaim: CPU0 CPU1 ---- ---- lock(&xfs_nondir_ilock_class); lock(fs_reclaim); lock(&xfs_nondir_ilock_class); lock(fs_reclaim); Fix this by moving xfs_trans_set_context() before the error check so that nofs context is always restored on the new transaction. | ||||
| CVE-2026-80813 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist() When a host issues an Identify command with CNS 07h (Active Namespace ID List for a specific I/O Command Set), nvmet_execute_identify_nslist() is called with match_css set. The command-set filter dereferences req->ns, but this handler never calls nvmet_req_find_ns(), so req->ns is always NULL (nvmet_req_init() resets it to NULL). As soon as an enabled namespace with an NSID greater than the requested value exists, req->ns->csi dereferences a NULL pointer and oopses. Besides the crash, the comparison is logically wrong: to filter the list by command set it must test the command set of the namespace being iterated, not a single fixed value. Use the loop variable ns->csi. | ||||
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-80839 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject unrepresentable multicast TVLV offsets The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. | ||||
| CVE-2026-80840 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: seg6: clear IPv4 control block on IPIP decapsulation End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress. | ||||
| CVE-2026-80842 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: fix use-after-free of a master VLAN's multicast context br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before stopping a VLAN's multicast context. That is the teardown handshake: lockless readers gate on the flag through br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so once it is cleared under the lock no reader can arm the context again. For a master VLAN the handshake never runs. __vlan_del() clears BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so br_multicast_toggle_one_vlan(masterv, false) returns early on !br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is never taken. br_vlan_put_master() then drains the context in br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a reader still inside rcu_read_lock() sees the context as enabled and re-arms it. The port and port-VLAN branch of the function has no br_vlan_is_brentry() test and flips the flag under br->multicast_lock, so it is not affected. The reader is the bridge transmit path. For a master VLAN br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with pmctx = NULL, so IGMP sent to the bridge device re-arms the context's timers after br_multicast_ctx_deinit() has already stopped them. BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0 Write of size 8 at addr ffff88810ac39918 by task brmc/601 __mod_timer+0x51a/0xc50 br_multicast_host_join+0x25b/0x390 __br_multicast_add_group+0x468/0x530 br_ip4_multicast_add_group+0x1a0/0x260 br_multicast_rcv+0x2cda/0x61e0 br_dev_xmit+0x6c4/0x1540 Allocated by task 610: br_vlan_add+0x111/0xb40 br_vlan_info+0x370/0x3e0 Freed by task 0: kfree+0x1a7/0x4f0 rcu_core+0x7dc/0x10a0 Only test br_vlan_is_brentry() when enabling, like the br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before br_multicast_ctx_deinit() drains the context. | ||||
| CVE-2026-80844 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah6: validate routing header segments_left AH6 rearranges routing-header addresses before computing or verifying the ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than the number of addresses described by the routing header's hdrlen field. That assumption does not hold for raw IPv6 HDRINCL packets. A packet with hdrlen equal to 2 describes one address, but can carry an arbitrary segments_left value. With segments_left equal to 255, the function moves its address pointer 4,064 bytes backwards and passes a 4,064-byte length to memmove(), resulting in an out-of-bounds access. Validate the invariant locally before modifying the routing header or performing any address-pointer arithmetic, and propagate malformed-header errors to the existing AH6 input and output error paths. | ||||
| CVE-2026-80848 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: fix UAF during close ZDI reported and analyzed a race condition during close for espintcp sockets: espintcp_close() frees emsg->skb via kfree_skb() without holding any socket lock. Concurrently, the xfrm_trans_reinject work queue invokes esp_output_tcp_finish() -> espintcp_push_skb() -> espintcp_push_msgs() -> skb_send_sock_locked(), which reads the same skb as a data source. Fix this by adding a synchronize_rcu() call after resetting sk_prot, since esp_output_tcp_finish() runs under RCU and won't use a socket with sk_prot == &tcp_prot. Simply taking the socket lock in espintcp_close() could lead to leaks, if esp_output_tcp_finish() re-adds an skb in the slot we just freed. After this, the existing barrier() is no longer needed. | ||||
| CVE-2026-80849 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of current_key on reconnect to another peer tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken, with only rcu_read_lock() held. On the fast path for established sockets, if the rnext_keyid sent by the peer differs from current_key->sndid, the key the peer asked for is looked up and stored in current_key. The lookup is inside the RCU read side, but current_key outlives it. When the socket is disconnected and connect() is called again for another peer, tcp_ao_connect_init() unlinks every key that does not match the new peer and frees it with call_rcu(). If current_key points at such a key, it is cleared to NULL. The fast path reads sk_state only once on entry, so a softirq that got into it while the socket was still established can update current_key after that loop has already run. The update is inside the RCU read side, so it comes before the call_rcu() callback, and once the callback frees the key, current_key is left pointing at freed memory. The next transmission picks that pointer up in tcp_get_current_key(). tcp_ao_transmit_skb() then reads the traffic key from the freed object, which is the use-after-free. Wait for one grace period before unlinking, and only if a key is going to be removed. By the time tcp_connect() runs the socket is already in TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so a softirq entering after the wait cannot reach the fast path, and the ones already in it have finished. The existing NULL handling in the loop is then enough. | ||||