Export limit exceeded: 23471 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23471 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43502 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-09-14 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2021-36081 | 2 Linux, Tesseract-ocr | 2 Linux Kernel, Tesseract Ocr | 2026-09-14 | 7.8 High |
| Tesseract OCR 5.0.0-alpha-20201231 has a one_ell_conflict use-after-free during a strpbrk call. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | ||||
| CVE-2026-89765 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: timers/itimer: Zero-init old itimerval before copy to userspace On native sparc64, struct __kernel_old_timeval contains a four-byte hole after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit. put_itimerval() fills only the named fields in a stack-allocated __kernel_old_itimerval and copies the entire object to userspace, so getitimer() can expose the two padding holes. Zero-initialize the aggregate before assigning the fields so implicit padding is deterministic before it crosses the user/kernel boundary. | ||||
| CVE-2026-89756 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent state, and the migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the Tasks-RCU grace period for minutes, which is common at Meta fleet: INFO: rcu_tasks detected stalls on tasks: 0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task Call Trace: tdp_mmu_zap_leafs tdp_mmu_next_root gfn_to_pfn_cache_invalidate_start kvm_mmu_notifier_invalidate_range_start __mmu_notifier_invalidate_range_start try_to_migrate_one try_to_migrate migrate_pages_batch migrate_pages compact_zone compact_node kcompactd kthread Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even when cond_resched() does nothing. This has also been discussed at [1] | ||||
| CVE-2026-89753 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded time, and the scan loop in shrink_lruvec() only calls cond_resched(), which is a no-op on PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent state, so the reclaiming task never reports one and becomes a holdout. Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state even when cond_resched() does nothing. PS: This has been discussed in [1] | ||||
| CVE-2026-89752 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operations only per open file, so separate open files can update the same memory.high or memory.max file concurrently. Both handlers store the new limit before synchronous reclaim, but continue to use the writer's local target in the reclaim loop. If another writer raises or removes the limit, the first writer can continue reclaiming toward a stale target. For memory.max, this can leave the writer looping indefinitely once reclaim retries are exhausted. The OOM path sees sufficient margin under the current limit and returns true without killing, while the writer still compares usage against its stale target and records another OOM event. Check the current limit at the start of each reclaim iteration and stop if it no longer matches the writer's target. Reproducer: Populate a cgroup with anonymous memory and disable swapping. Lower memory.max from one open file, then restore it to "max" through another open file after the new limit becomes visible. Without the patch, the first writer remains blocked and repeatedly increments the OOM event counter. With the patch, it returns normally. This was not motivated by a reported production workload. We found it through automated randomized testing for our cgroup observability work and reduced it to the reproducer above. | ||||
| CVE-2026-89751 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation. | ||||
| CVE-2026-89750 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44 Call Trace: <TASK> kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 current_user_event_mm+0x51/0x1d0 user_events_ioctl+0x82e/0x15c0 __x64_sys_ioctl+0x139/0x1c0 do_syscall_64+0xce/0x450 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 44: __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x180/0x3a0 user_event_mm_alloc+0x3c/0x1f0 current_user_event_mm+0x88/0x1d0 Freed by task 42: __kasan_slab_free+0x43/0x70 kfree+0x13a/0x390 process_one_work+0x696/0xf90 worker_thread+0x420/0xba0 The fix simply clears the copied pointer before any possible failure. In case of failure, the child then has nothing to free. | ||||
| CVE-2026-89749 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). | ||||
| CVE-2026-89746 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger The third write panics the kernel: BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290 Read of size 8 at addr ffff888001f8a0e0 by task sh/1 CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N Call Trace: find_var_file.part.0 find_event_var parse_atom parse_expr __create_val_field event_hist_trigger_parse trigger_process_regex event_trigger_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe Allocated by task 1: event_hist_trigger_parse Freed by task 1: hist_register_trigger+0x618/0xa30 event_hist_trigger_parse The buggy address belongs to freed 2048-byte region Oops: general protection fault ... RIP: find_var_file.part.0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix by removing the hist_data from tr->hist_vars and releasing the trace_array reference in the named-data branch of hist_register_trigger() before freeing the hist_data. | ||||
| CVE-2026-89744 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL │ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1 │ │ fwnode_get_next_child_node(FWa, FWb1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1 └────┘ This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}. The root cause is that when the current child (FWb1) belongs to the secondary fwnode, calling get_next_child_node() on the parimary fwnode incorrectly returns the first child (FWa1) again instead of NULL. Fix this by dynamically checking the parent fwnode of the current child before calling get_next_child_node(). This approach follows the pattern established in commit b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()"). | ||||
| CVE-2026-89742 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO mport character device interface. | ||||
| CVE-2026-89741 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not really a good way of fixing this without breaking video_register_device() into two parts, one that initializes everything, and one that does the actual device_register, and then converting all V4L2 drivers to this new model. That is a massive job, and it is very unlikely that device_register will fail. So rather than ending up in a double-free scenario, just revert this patch, and in that case we'll have a small memory leak. Which is a lot more robust. | ||||
| CVE-2026-89736 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free (UAF) memory corruption. Fix this issue by deferring the destruction of struct snd_uac_chip until all references to the ALSA sound card are released. Register a custom card->private_free callback (u_audio_card_free) during g_audio_setup() that frees uac and its associated playback/capture request and ring buffers only when the sound card reference count drops to zero. | ||||
| CVE-2026-89735 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: remove default configfs groups on teardown f_midi2_alloc_inst() creates default configfs child groups for the default endpoint and default block using configfs_add_default_group(), setting their internal refcount to 1. However, during function teardown in f_midi2_free_inst() or EP cleanup in f_midi2_ep_opts_release(), configfs_remove_default_groups() is never called, therefore never dropping the refcount and leaking struct f_midi2_ep_opts and f_midi2_block_opts. Add the missing configfs_remove_default_groups() in the afformentioned functions to free the structs properly. | ||||
| CVE-2026-89733 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() In uvc_function_bind() error path, we use usb_ep_free_request which uses uvc->control_req but does not set it to NULL afterwards. Thus, uvc->control_req is a dangling pointer causing a UAF. Also we do not set the uvc->control_buf pointer to NULL after freeing it, which is another dangling pointer. Fix it by setting uvc->control_req to NULL after we run usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the same for uvc_function_unbind(). | ||||