In the Linux kernel, the following vulnerability has been resolved:
bpf: Infer zext_dst based on static register liveness analysis
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness")
bpf: Infer zext_dst based on static register liveness analysis
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness")
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Wed, 21 Oct 2026 17:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [1], the verifier's 32-bit operations zero extension logic is broken. This logic is responsible for correct semantics of 32-bit operations on s390 architecture. According to BPF semantics, operation `w1 += 1` is supposed to zero extend the upper half of the register `r1`. On s390 the JIT relies on the verifier emitting explicit zero extension before such operations. The verifier attempts to minimize the amount of zero extensions inserted by tracking whether upper halves of the 64-bit registers are ever used. Previously such tracking worked as follows: - bpf_reg_state->subreg_def field was set by do_check_insn() for each operation defining lower but not the upper halves of the register. - Whenever an operation reading the whole register was verified, the verifier checked register's subreg_def and set bpf_insn_aux_data->zext_dst flag as true via a call to mark_insn_zext() function. - After the verification was complete, a special pass bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations with bpf_insn_aux_data->zext_dst set as true by adding explicit zero extension. Note that the logic above relies on bpf_reg_state->subreg_def, which is a property of a current verifier state. Before the commit [2] two additional steps happened: - The verifier tracked upper and lower register halves' liveness as flags REG_LIVE_READ{32,64} in bpf_reg_state->live. - The function propagate_liveness() called mark_insn_zext() in order to transfer the knowledge about which registers have their upper halves alive (and thus might require zero extension). The commit [2] removed the two steps described above, hence making possible a situation like below: - The register's upper half is set and is used on some verification path P1 and the register happens not to be marked as precise. - The checkpoint C is created while processing some instruction between register initialization and usage. - On some other verification path P2 the register's upper half is not initialized and that path ends hitting the checkpoint C. - In such a case the register's initialization on path P2 would lack zext_dst mark, making it possible for the program to inject an arbitrary value in the register's upper half. This commit replaces subreg_def based logic with computing zext_dst statically, as a part of the bpf_compute_live_registers() analysis: - The analysis now tracks usage of upper and lower halves of the registers separately. - If some instruction defines a 32-bit subregister, but not the whole register, *and* the upper half of the register is alive after that instruction, the instruction is marked as zext_dst. There is one notable drop in precision: whenever a BPF subprogram is called, all 64 bits of parameter registers are presumed to be used. The assumption is that such a drop in precision would not inflict a noticeable performance penalty. [1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/ [2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness") | |
| Title | bpf: Infer zext_dst based on static register liveness analysis | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-10-21T14:55:10.364Z
Reserved: 2026-09-25T10:25:14.377Z
Link: CVE-2026-98869
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-21T15:17:19.827
Modified: 2026-10-21T15:17:19.827
Link: CVE-2026-98869
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.