In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field on every URB completion:
offset = lines_completed * (dev->width << 1) + ...;
if (dma_q->current_field == 2)
offset += dev->width * 2 * dma_q->lines_per_field;
memcpy(plane + offset, p_buffer, lencopy);
Because the VBI node shares video_ioctl_ops with the video node, an
application can size a small VBI plane (REQBUFS/QBUF with a small width,
or with the NTSC standard), then enlarge dev->width (or switch dev->norm
to PAL) through the video node while the VBI stream is running -- the
change is allowed because only dev->vidq is checked -- and let the device
deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the
offset with the larger geometry and memcpy()s past the end of the smaller
plane that was already allocated, a heap out-of-bounds write whose offset
is attacker-chosen and whose contents come from the device. The
per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the
copy against the latched lines_per_field, not the plane's real capacity,
and vb2 does not re-run buf_prepare() for an already prepared buffer.
Refuse the format/standard change when the VBI queue is busy as well, so
the geometry cannot change underneath an allocated VBI buffer.
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field on every URB completion:
offset = lines_completed * (dev->width << 1) + ...;
if (dma_q->current_field == 2)
offset += dev->width * 2 * dma_q->lines_per_field;
memcpy(plane + offset, p_buffer, lencopy);
Because the VBI node shares video_ioctl_ops with the video node, an
application can size a small VBI plane (REQBUFS/QBUF with a small width,
or with the NTSC standard), then enlarge dev->width (or switch dev->norm
to PAL) through the video node while the VBI stream is running -- the
change is allowed because only dev->vidq is checked -- and let the device
deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the
offset with the larger geometry and memcpy()s past the end of the smaller
plane that was already allocated, a heap out-of-bounds write whose offset
is attacker-chosen and whose contents come from the device. The
per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the
copy against the latched lines_per_field, not the plane's real capacity,
and vb2 does not re-run buf_prepare() for an already prepared buffer.
Refuse the format/standard change when the VBI queue is busy as well, so
the geometry cannot change underneath an allocated VBI buffer.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Wed, 16 Sep 2026 10:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: reject geometry changes while the VBI queue is busy vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide dev->width / dev->norm but only refuse the change when the *video* queue (dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry: cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm, the VBI videobuf2 plane is sized from dev->width / dev->norm in vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then recomputes the destination offset from the *live* dev->width and the latched lines_per_field on every URB completion: offset = lines_completed * (dev->width << 1) + ...; if (dma_q->current_field == 2) offset += dev->width * 2 * dma_q->lines_per_field; memcpy(plane + offset, p_buffer, lencopy); Because the VBI node shares video_ioctl_ops with the video node, an application can size a small VBI plane (REQBUFS/QBUF with a small width, or with the NTSC standard), then enlarge dev->width (or switch dev->norm to PAL) through the video node while the VBI stream is running -- the change is allowed because only dev->vidq is checked -- and let the device deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the offset with the larger geometry and memcpy()s past the end of the smaller plane that was already allocated, a heap out-of-bounds write whose offset is attacker-chosen and whose contents come from the device. The per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the copy against the latched lines_per_field, not the plane's real capacity, and vb2 does not re-run buf_prepare() for an already prepared buffer. Refuse the format/standard change when the VBI queue is busy as well, so the geometry cannot change underneath an allocated VBI buffer. | |
| Title | media: cx231xx: reject geometry changes while the VBI queue is busy | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-16T10:31:56.101Z
Reserved: 2026-09-11T19:38:34.773Z
Link: CVE-2026-89894
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-16T11:16:58.127
Modified: 2026-09-16T11:16:58.127
Link: CVE-2026-89894
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.