The LoRaWAN Fragmented Data Block Transport service (subsys/lorawan/services/frag_transport.c) does not validate the fragment counter in a received DATA_FRAGMENT command before forwarding it to the configured decoder. In frag_transport_package_callback() the value frag_counter = hdr->frag_index_n & 0x3FFF is taken directly from the downlink payload and passed to the decoder, which derives an array index and flash offset as frag_counter - 1. DataFragment fragments are 1-indexed, so a frag_counter of 0 underflows that arithmetic.
With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks.
The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends.
With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks.
The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends.
Project Subscriptions
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Fri, 14 Aug 2026 19:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| First Time appeared |
Zephyrproject
Zephyrproject zephyr |
|
| Vendors & Products |
Zephyrproject
Zephyrproject zephyr |
Fri, 14 Aug 2026 18:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | The LoRaWAN Fragmented Data Block Transport service (subsys/lorawan/services/frag_transport.c) does not validate the fragment counter in a received DATA_FRAGMENT command before forwarding it to the configured decoder. In frag_transport_package_callback() the value frag_counter = hdr->frag_index_n & 0x3FFF is taken directly from the downlink payload and passed to the decoder, which derives an array index and flash offset as frag_counter - 1. DataFragment fragments are 1-indexed, so a frag_counter of 0 underflows that arithmetic. With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks. The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends. | |
| Title | Out-of-bounds write in LoRaWAN fragmented transport from a fragment index of 0 | |
| Weaknesses | CWE-787 | |
| References |
| |
| Metrics |
cvssV3_1
|
Projects
Sign in to view the affected projects.
Status: PUBLISHED
Assigner: zephyr
Published:
Updated: 2026-08-14T19:26:51.474Z
Reserved: 2026-06-16T03:53:41.904Z
Link: CVE-2026-12363
No data.
Status : Received
Published: 2026-08-14T18:17:21.697
Modified: 2026-08-14T18:17:21.697
Link: CVE-2026-12363
No data.
OpenCVE Enrichment
Updated: 2026-08-14T19:30:03Z
Weaknesses