| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.3, the channel webhook create/update flow accepts arbitrary profile_image_url values, including data:image/svg+xml;base64,... payloads. The profile image endpoint then decodes and serves this SVG as image/svg+xml without sanitization, allowing attacker-controlled script handlers (for example onload) to execute when the profile-image URL is opened in the browser. This vulnerability is fixed in 0.9.3. |
| Magento Long Term Support (LTS) is an unofficial, community-driven project provides an alternative to the Magento Community Edition e-commerce platform with a high level of backward compatibility. Prior to 20.18.0, there is a reflected XSS vulnerability under admin panel -> System -> Import/Export -> Dataflow - Profiles. This vulnerability is fixed in 20.18.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an unauthenticated attacker could register a malicious MCP OAuth client with a crafted client_name. If a victim user authorized the OAuth consent dialog and a second user subsequently revoked that access, a toast notification would render the injected script. Clicking the link would execute arbitrary JavaScript in the victim's authenticated n8n browser session, enabling credential and session token theft, workflow manipulation, or privilege escalation. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.2.2, a user could upload a specially crafted SVG file that could include scripts that can target both authenticated and unauthenticated DNN users. The impact is increased if the scripts are run by a power user. Version 10.2.2 patches the issue. |
| The Ova Advent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's shortcodes in all versions up to, and including, 1.1.7 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Leafkit is a templating language with Swift-inspired syntax. Prior to 1.4.1, htmlEscaped in leaf-kit will only escape html special characters if the extended grapheme clusters match, which allows bypassing escaping by using an extended grapheme cluster containing both the special html character and some additional characters. In the case of html attributes, this can lead to XSS if there is a leaf variable in the attribute that is user controlled. This vulnerability is fixed in 1.4.1. |
| Ory Polis, formerly known as BoxyHQ Jackson, bridges or proxies a SAML login flow to OAuth 2.0 or OpenID Connect. Versions prior to 26.2.0 contain a DOM-based Cross-Site Scripting (XSS) vulnerability in Ory Polis's login functionality. The application improperly trusts a URL parameter (`callbackUrl`), which is passed to `router.push`. An attacker can craft a malicious link that, when opened by an authenticated user (or an unauthenticated user that later logs in), performs a client-side redirect and executes arbitrary JavaScript in the context of their browser. This could lead to credential theft, internal network pivoting, and unauthorized actions performed on behalf of the victim. Version 26.2.0 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a deadlock involving nfs_release_folio()
Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery
waiting on kthreadd, which is attempting to reclaim memory by calling
nfs_release_folio(). The latter cannot make progress due to state
recovery being needed.
It seems that the only safe thing to do here is to kick off a writeback
of the folio, without waiting for completion, or else kicking off an
asynchronous commit. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. In versions 5.0.1 and below, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. This issue is fixed in version 5.1.0. |
| The Opal Estate Pro – Property Management and Submission plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the agent latitude and longitude parameters in all versions up to, and including, 1.7.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Font Farsi plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.6.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| Vega is a visualization grammar, a declarative format for creating, saving, and sharing interactive visualization designs. In Vega prior to version 5.32.0, corresponding to vega-functions prior to version 5.17.0, users running Vega/Vega-lite JSON definitions could run unexpected JavaScript code when drawing graphs, unless the library was used with the `vega-interpreter`. Vega version 5.32.0 and vega-functions version 5.17.0 fix the issue. As a workaround, use `vega` with expression interpreter. |
| Shaarli is a minimalist bookmark manager and link sharing service. Prior to 0.15.0, the input string in the cloud tag page is not properly sanitized. This allows the </title> tag to be prematurely closed, leading to a reflected Cross-Site Scripting (XSS) vulnerability. This vulnerability is fixed in 0.15.0. |
| YesWiki is a wiki system written in PHP. Prior to version 4.6.0, a stored and blind XSS vulnerability exists in the form title field. A malicious attacker can inject JavaScript without any authentication via a form title that is saved in the backend database. When any user visits that injected page, the JavaScript payload gets executed. This issue has been patched in version 4.6.0. |
| ChurchCRM is an open-source church management system. Prior to 7.1.0, a stored cross-site scripting vulnerability exists in PersonView.php due to incorrect use of sanitizeText() as an output sanitizer for HTML attribute context. The function only strips HTML tags, it does not escape quote characters allowing an attacker to break out of the href attribute and inject arbitrary JavaScript event handlers. Any authenticated user with the EditRecords role can store the payload in a person's Facebook field. The XSS fires against any user who views that person's profile page, including administrators, enabling session hijacking and full account takeover. This vulnerability is fixed in 7.1.0. |
| Homarr is an open-source dashboard. Prior to 1.57.0, a DOM-based Cross-Site Scripting (XSS) vulnerability has been discovered in Homarr's /auth/login page. The application improperly trusts a URL parameter (callbackUrl), which is passed to redirect and router.push. An attacker can craft a malicious link that, when opened by an authenticated user, performs a client-side redirect and executes arbitrary JavaScript in the context of their browser. This could lead to credential theft, internal network pivoting, and unauthorized actions performed on behalf of the victim. This vulnerability is fixed in 1.57.0. |
| Improper neutralization of alternate XSS syntax vulnerability in The Wikimedia Foundation Mediawiki - Wikilove Extension allows Cross-Site Scripting (XSS).The issue has been remediated on the `master` branch, and in the release branches for MediaWiki versions 1.43, 1.44, and 1.45. |
| The Elementor Website Builder – More Than Just a Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via several widget parameters in all versions up to, and including, 3.35.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Themesflat Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's widget's titles in all versions up to, and including, 2.1.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
