| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Remote Access SSL VPN service of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to logic errors when secondary authentication is configured on a tunnel group. An attacker could exploit this vulnerability by sending a crafted request when connecting to the SSL remote access VPN. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| ImageMagick before 6.9.13-58 and 7.x before 7.1.2-32 contains a security policy bypass caused by an incomplete fix for the policy bypass reported in GHSA-jjp4-3fwf-393j. An attacker able to supply input to ImageMagick can evade configured security policy restrictions, allowing operations the policy was intended to block. |
| Wasmtime is a runtime for WebAssembly. Prior to 36.0.19, 48.0.7, and 49.0.4, the Cranelift compiler backend on aarch64 can compile a Wasm br_table instruction with more than approximately 256,000 targets so that it has an incorrect conditional branch target. The branch can then jump to arbitrary other code at a user-controlled offset, allowing a user-controlled Wasm module to escape the sandbox on aarch64 engines using the default Cranelift backend. This issue is fixed in versions 36.0.19, 48.0.7, and 49.0.4. |
| Execution After Redirect (EAR) vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue. |
| baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Fix mm reuse handling for FUT_OFF_MMSHARED
A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM.
It is possible for a process to wait on a shared futex with a different MM
because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED
futex by another process.
This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume
wakeups intended for a newly allocated MM at the same address.
Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID.
Leave private futexes as before to avoid influencing the performance of the
hotpath.
(Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by
setting clear_child_tid such that it points into anonymous memory, which
causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. From 0.13 until 1.8.0, authlib.common.security.is_secure_transport() uses a textual prefix comparison for loopback HTTP exemptions, so a URL whose userinfo begins with a loopback host can be accepted even when its parsed host is an external non-loopback system. An external party able to supply a URL to OIDC RP-Initiated Logout registration, authorization-server metadata validation, or another call site can bypass the TLS-required guard and cause cleartext redirection or acceptance of cleartext endpoints. The issue does not bypass redirect URI exact matching and does not by itself forge tokens or authenticate users. The vulnerable authlib.common.security.is_secure_transport() implementation in authlib/common/security.py misinterprets the userinfo component before OIDC RP-Initiated Logout dynamic client registration and other consumers enforce transport security. This issue is fixed in version 1.8.0. |
| PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.59, PraisonAI recipe execution blocks default-denied dangerous tools unless the caller explicitly passes allow_dangerous_tools=True. The normal recipe.run() path enforces this with _check_tool_policy(). The streaming path, recipe.run_stream(), loads the same recipe, checks dependencies, and then calls _execute_recipe() without running the dangerous-tool policy check. As a result, a recipe that honestly declares execute_command in TEMPLATE.yaml requires.tools is denied by recipe.run(), but reaches the execution engine through recipe.run_stream() with allow_dangerous_tools=False. This issue has been patched in version 4.6.59. |
| Linux binaries have executable stack attribute enabled. The following products are affected: Acronis Cyber Protect 17 (Linux) before build 42587. |
| PraisonAI is a multi-agent teams system. From version 4.5.110 to before version 4.6.61, praisonai.sandbox.SandlockSandbox is documented and implemented as the kernel-enforced sandbox backend for untrusted code. Its SandboxConfig.native() path lets callers configure allowed filesystem paths and network=False. On systems where the optional sandlock module imports but reports that Landlock is unavailable, SandlockSandbox.execute() and run_command() do not fail closed. They silently fall back to SubprocessSandbox(self.config). That fallback keeps the same high-level native policy object but does not enforce the native filesystem or network boundary during code execution. A sandboxed payload can read files outside the configured allowed path and open network connections despite network=False. This issue has been patched in version 4.6.61. |
| A flaw in the BMC RAKP+ implementation may allow an attacker to send a request followed by a specially crafted RAKP message and establish an RMCP+ session, which could then be used to execute commands. |
| Tanium addressed a denial of service vulnerability in Provision. |
| PostgreSQL Anonymizer contains a vulnerability related to anonymization functions defined using SQL-standard function bodies. PostgreSQL analyses such functions at declaration time, while Anonymizer only attempts to check them at execution time. This problem can be exploited by any user with the TEMPORARY privilege. The issue is fixed in PostgreSQL Anonymizer 3.3.0 and later versions. |
| PostgreSQL Anonymizer contains a vulnerability related to the anon.partial() and anon.partial_email() functions. These function can reveal the while data if the data is small enough. The issue is fixed in PostgreSQL Anonymizer 3.3.0 and later versions. |
| adm-zip before 0.6.1 contains an inconsistent entry resolution vulnerability that allows attackers to bypass content validation by supplying ZIP archives with duplicate entry names. Attackers can craft archives where getEntry() returns the last duplicate while extractAllTo() writes the first, causing unvalidated bytes to be written to disk. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A local attacker may be able to elevate their privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix false warning in ring_buffer_map_get_reader()
The mmap reader can warn when it catches up with a writer that is still
committing events. rb_get_reader_page() returns NULL in this case, but
ring_buffer_map_get_reader() treats that result as an error.
The initial rb_per_cpu_empty() check filters out an empty buffer, but it
does not guarantee that the next reader page has committed data. Writers
do not take reader_lock and can advance commit_page before publishing the
committed length on the new page. rb_get_reader_page() can swap to that
page, catch up with the writer and return NULL.
Handle NULL through the existing no-data exit without warning. Remove the
caller's reader_page == commit_page check as well, since the reader-page
helper already handles that case. The existing metadata update and return
path remain in place. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| Protection mechanism failure due to missing binary hardening in Linux executables. The following products are affected: Acronis Cyber Protect 17 (Linux) before build 42587. |
| Sentry-Javascript is an official Sentry SDKs for JavaScript. From 9.36.0 until 9.47.2, 10.75.2, and 11.0.0-rc.1, the webpack integration for @sentry/nextjs skips application middleware for every request path under a configured tunnelRoute, while the tunnel rewrite serves only the exact tunnel path with valid o and p query parameters. When an application route directly collides with the tunnel path or a root dynamic segment resolves under it, an unauthenticated request can reach that route without middleware authorization. Exploitation requires tunnelRoute, a webpack build, a colliding route, and middleware being the only authorization control. This issue is fixed in versions 9.47.2, 10.75.2, and 11.0.0-rc.1. |
