Search
Search Results (12 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88047 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 8.4 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadNormProtos in src/classify/normmatch.cpp parses the NORMPROTO component of a .traineddata file and uses std::istream::operator>>(char*) to extract a whitespace-delimited token into a fixed 61-byte stack buffer without setting a stream width. The 100-byte line buffer can carry a token of up to 99 characters, so a token longer than 60 characters writes up to 39 attacker-controlled bytes past the buffer during TessBaseAPI::Init of the legacy engine, causing stack corruption, denial of service, and potentially control-flow hijacking on affected standard-library implementations. Builds using Apple's libc++ C++20 bounded array overload are incidentally protected, while typical libstdc++ builds remain affected. No fixed release is available as of this review. | ||||
| CVE-2026-88048 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 7.8 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, FullyConnected::DeSerialize in src/lstm/fullyconnected.cpp does not validate the deserialized layer scalars ni_ and no_ against the weight-matrix dimensions. During FullyConnected::Forward, MatrixDotVector in src/lstm/weightmatrix.cpp writes w.dim1() results into temp_line, which is sized from no_, and reads w.dim2() minus one inputs from curr_input, which is sized from ni_. A crafted .traineddata NT_SOFTMAX layer can therefore use inconsistent dimensions to cause a heap out-of-bounds write and read on the default LSTM engine, resulting in heap corruption, a crash, information disclosure, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-88049 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 7.8 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, prior .traineddata hardening added bounds checks to NetworkIO::CopyTimeStepGeneral and NetworkIO::Randomize in src/lstm/networkio.cpp but left NetworkIO::WriteTimeStepPart and NetworkIO::AddTimeStepPart unchecked. In LSTM::Forward in src/lstm/lstm.cpp, source_ is sized from the independently deserialized na_ field while the WriteTimeStepPart count is ns_, which comes from the CI gate WeightMatrix dim1() value. A crafted NT_LSTM layer can make ns_ much larger than na_, causing a heap out-of-bounds write during the first recognition step on the default LSTM engine and resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-88050 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 5.5 Medium |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, RecodedCharID::DeSerialize in src/ccutil/unicharcompress.h validates length_ but accepts negative code_ values from a crafted .traineddata recoder component. UnicharCompress::ComputeCodeRange in src/ccutil/unicharcompress.cpp can consequently produce code_range_ equal to zero, after which SetupDecoder indexes is_valid_start_ with the negative code on a size-zero vector. The resulting out-of-bounds bit write uses a large wrapped index and reliably causes a wild-address crash or allocation failure on the default LSTM engine. No fixed release is available as of this review. | ||||
| CVE-2026-88051 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 7.8 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, the callback form of GenericVector::read in src/ccutil/genericvector.h reads the independent int32 fields reserved and size_used_ from a .traineddata model without a cap or an invariant check. reserve(reserved) allocates the backing array, but the callback loop writes size_used_ elements. A crafted TESSDATA_INTTEMP component with version_id 4 or later can therefore set reserved to a small value and size_used_ to a large value when fontinfo_table_.read(fp, read_info) is called from src/classify/intproto.cpp, causing a heap out-of-bounds write of FontInfo structures, heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-88052 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 7.8 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, UNICHARSET::load_via_fgets in src/ccutil/unicharset.cpp trusts the declared unichar count as a loop bound and uses id as an unchecked index into the unichars vector. unichar_insert_backwards_compatible can leave the vector unchanged for an empty, duplicate, or already-encodable representation, causing id to become larger than unichars.size(). Subsequent set_* calls and the write to unichars[id].properties.enabled then write UNICHAR_PROPERTIES beyond the vector during initialization in both the default LSTM and legacy engines, causing heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-88053 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 8.4 High |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Classify::ReadIntTemplates in src/classify/intproto.cpp reads NumClassPruners, NumClasses, and NumProtoSets from the TESSDATA_INTTEMP component of a crafted .traineddata file and uses those values as loop bounds without validating them against MAX_NUM_CLASS_PRUNERS, MAX_NUM_CLASSES, and MAX_NUM_PROTO_SETS. The loops store heap pointers into fixed-capacity ClassPruners and ProtoSets arrays in INT_TEMPLATES_STRUCT and INT_CLASS_STRUCT, so an oversized count causes heap out-of-bounds pointer writes during legacy-classifier initialization before OCR begins, resulting in heap corruption, a crash, or potentially controlled corruption. No fixed release is available as of this review. | ||||
| CVE-2026-88054 | 1 Tesseract Project | 1 Tesseract | 2026-09-13 | 5.5 Medium |
| Tesseract is an open source OCR engine. In version 5.5.3 and earlier, Plumbing::DeSerialize in src/lstm/plumbing.cpp rejects excessively large network stacks but accepts a zero-length stack for NT_SERIES, NT_PARALLEL, or NT_REVERSED layers in a crafted .traineddata model. During LSTMRecognizer initialization in src/lstm/lstmrecognizer.cpp, CacheXScaleFactor(XScaleFactor()) reaches Series::CacheXScaleFactor in src/lstm/series.cpp, which dereferences stack_[0] on the empty vector and invokes a virtual method through an invalid Network pointer. This causes a deterministic crash and denial of service at model load. No fixed release is available as of this review. | ||||
| CVE-2026-73066 | 1 Tesseract Project | 1 Tesseract | 2026-08-13 | N/A |
| Tesseract is an open source OCR engine. Prior to 5.5.3, a crafted .traineddata LSTM model component loaded through Tesseract's deserializer can cause an unchecked signed integer multiplication in Convolve::DeSerialize in src/lstm/convolve.cpp to wrap the convolution output-channel count, undersizing the forward-pass output buffer while writes use the unwrapped element count and causing a heap out-of-bounds write during OCR recognition. This issue is fixed in version 5.5.3. | ||||
| CVE-2026-73067 | 1 Tesseract Project | 1 Tesseract | 2026-08-13 | 5.5 Medium |
| Tesseract is an open source OCR engine. Prior to 5.5.3, a crafted .traineddata model loaded through TessBaseAPI::Init can cause SquishedDawg::read_squished_dawg in src/dict/dawg.cpp to accept an unterminated forward-edge run, after which SquishedDawg::Load calls num_forward_edges(0) and last_edge in src/dict/dawg.h reads beyond edges_, causing a heap out-of-bounds read and process crash before image processing. This issue is fixed in version 5.5.3. | ||||
| CVE-2022-38266 | 3 Debian, Leptonica, Tesseract Project | 3 Debian Linux, Leptonica, Tesseract | 2024-11-21 | 6.5 Medium |
| An issue in the Leptonica linked library (v1.79.0) allows attackers to cause an arithmetic exception leading to a Denial of Service (DoS) via a crafted JPEG file. | ||||
| CVE-2011-1136 | 2 Debian, Tesseract Project | 2 Debian Linux, Tesseract | 2024-11-21 | 4.7 Medium |
| In tesseract 2.03 and 2.04, an attacker can rewrite an arbitrary user file by guessing the PID and creating a link to the user's file. | ||||
Page 1 of 1.