| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, the cors_origins guard in glances/outputs/glances_restful_api.py uses exact list equality instead of wildcard membership, allowing a multi-origin list containing the wildcard to retain cors_credentials and expose authenticated REST API data to an untrusted website visited by a previously authenticated user. This issue is fixed in 4.5.6. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to an untrusted search path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: access unicast_ttvn skb->data only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the ethernet header but missed for the
unicast_packet pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: retrieve ethhdr after potential skb realloc on RX
pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind
the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the VLAN header but missed for the ethernet
header which is later used for the TT and AP isolation handling. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"
Revert
99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN").
Section 8.8 of the SNP spec says:
Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure
that no CPUs contain dirty cache lines for the memory containing the RMP.
Cachelines can be moved from cache to cache in a dirty state. The
wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but
if the IPIs for WBINVD race with this dirty cacheline movement, it is possible
that they may not get flushed, violating the firmware requirement.
Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP
table is not yet in use.
[ Heroically bisected by Srikanth. ]
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix zone comparison in tuple dedup
The "already exists" dedup logic in __nf_conncount_add() decides
whether a connection has already been counted and can be skipped instead
of incrementing the connlimit count. It compares the conntrack zone of a
list entry with the zone of the connection being added using
nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or
zone->dir as the direction argument.
Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0
and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask:
NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and
NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction
shifts the meaning of every non-zero value. An ORIG-only zone passes 1
and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and
test bits beyond the valid direction range. In those cases
nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using
the real zone id, so different zones can be treated as equal and dedup
collapses to tuple equality alone.
nf_conncount stores and compares the original-direction tuple for a
connection. If an skb already has an attached conntrack entry,
get_ct_or_tuple_from_skb() explicitly copies
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's
ctinfo. Therefore the zone comparison in the tuple dedup path must use
IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a
zone id applies, not which direction this conncount tuple represents.
Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly.
Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone
ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the
direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional
zone contains the ORIG bit, so it naturally returns the real zone id;
reply-only zones continue to fall back for original-direction tuple
comparisons. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6
fragment header and then unconditionally advances skb->mac_header:
skb->mac_header += sizeof(struct frag_hdr);
On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header
yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding
sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7),
after which skb_mac_header_was_set() wrongly reports a MAC header is
present and skb_mac_header() points into the headroom.
The reassembler has done this unconditional add since it was introduced;
it was harmless while mac_header was a bare pointer, but wrong once
mac_header became a u16 offset whose unset state is the ~0U sentinel
tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c
does the same relocation and does guard the adjustment; mirror the
guard here. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: don't leak bad clone into future transaction
On memory allocation failure the cloned nft_pipapo_match can enter a bad
state:
- some fields can have their lookup tables resized while others did
not
- bits might have been toggled
- scratch map can be undersized which also means m->bsize_max can be
lower than what is required
This means that the next insertion in the same batch can trigger
out-of-bounds writes.
Furthermore, a failure in the first can result in the bad clone to
leak into the next transaction because the abort callback is never
executed in this case (the upper layer saw an error and no attempt to
allocate a transactional request was made).
Record a state for the nft_pipapo_match structure:
- NEW (pristine clone)
- MOD (modified clone with good state)
- ERR (potentially bogus content)
Then make it so that deletes and insertions fail when the clone
entered ERR state.
In case the very first insert attempt results in an error, free the
clone right away. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory
When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable
memory attributes, even if the underlying PFN isn't memory. This gets
particularly hairy if the endpoint doesn't support cacheable memory
attributes, potentially throwing an SError on writeback...
While KVM does permit cacheable memory attributes on certain PFNMAP
VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the
simpler thing for now and just reject everything that isn't memory. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Respect read-only PFN when mapping L1 VNCR
KVM currently maps the L1 VNCR into the host stage-1 by relying entirely
on the permissions of the guest stage-1. At the same time, it is
entirely possible that the backing PFN is read-only (e.g. RO memslot),
meaning that the L1 VNCR should use at most a read-only mapping.
Cache the writability of the PFN in the VNCR TLB and use it to constrain
the resulting fixmap permissions. Promote VNCR permission faults to an
SEA in the case where the guest attempts to write to a read-only
endpoint. Conveniently, this also plugs a page leak found by Sashiko [*]
resulting from the early return for a read-only PFN. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers
kvm_io_bus_get_dev() returns a device that is only matched by the
address, and nothing else. This can cause a lifetime issue if
the matched device is not the expected type, as by the time
the caller can introspect the object, it might be gone (the srcu
lock having been dropped).
Given that there is only a single user of this helper, the simplest
option is to move the locking responsibility to the caller, which
can keep the srcu lock held for as long as it wants.
Note that this aligns with other kvm_io_bus*() helpers, which
already require the srcu lock to be held by the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: guard io_size EOF trim against concurrent truncate underflow
iomap: fix zero padding data issue in concurrent append writes
changed ioend accounting so that io_size tracks only valid data
within EOF. This trims io_size when a writeback range extends
past end_pos:
ioend->io_size += map_len;
if (ioend->io_offset + ioend->io_size > end_pos)
ioend->io_size = end_pos - ioend->io_offset;
However, if end_pos ends up below ioend->io_offset, the subtraction
becomes negative and is stored in size_t io_size, causing an unsigned
wrap to a huge value. This can happen when writeback continues past
byte-level EOF up to a block-aligned range, or when a concurrent
truncate shrinks the file after end_pos was sampled in
iomap_writeback_handle_eof().
A wrapped io_size can mislead append detection and corrupt
completion-time size handling, since filesystem end_io paths consume
io_size for decisions such as on-disk EOF updates and unwritten/COW
completion ranges.
Fix this by clamping io_size to zero when EOF has moved to or before
the ioend start offset. This preserves the original intent of trimming
io_size to valid in-EOF data while avoiding the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
The teql master->slaves singly linked list is not protected against
multiple writes. It can be mod'ed concurently from teql_master_xmit(),
teql_dequeue(), teql_init() and teql_destroy() without holding any list
lock or RCU protection.
zdi-disclosures@trendmicro.com has demonstrated that the qdisc is freed
after an RCU grace period, but teql_master_xmit() running on another
CPU can still hold a stale pointer into the list, resulting in a
slab-use-after-free:
BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0
Read of size 8 at addr ffff888013fb0440 by task poc/332
Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512)
The fix?
Add a per-master slaves_lock spinlock that serializes all mutations of
master->slaves and the NEXT_SLAVE() links in teql_destroy() and
teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock
around those updates.
Annotate master->slaves and the per-slave ->next pointer with __rcu and
use the appropriate RCU accessors everywhere they are touched:
rcu_assign_pointer() on the writer side (under slaves_lock),
rcu_dereference_protected() for the writer-side loads (also under
slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and
rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(),
which run under RTNL.
Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list
traversal in teql_master_xmit(), so that readers either observe a fully
linked list or are deferred until the in-flight mutation completes. The two
early-return paths in teql_master_xmit() are updated to release the RCU-bh
read-side critical section before returning, since leaving it held would
disable BH on that CPU for good. |
