| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An attacker who submits a crafted tar file with size in header struct being 0 may be able to trigger an calling of malloc(0) for a variable gnu_longlink, causing an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: restore set elements when delete set fails
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).
This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.
Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.
The splat below shows an object in mappings memleak:
[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118] <TASK>
[43929.458121] ? __warn+0x9f/0x1a0
[43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188] ? report_bug+0x1b1/0x1e0
[43929.458196] ? handle_bug+0x3c/0x70
[43929.458200] ? exc_invalid_op+0x17/0x40
[43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512] ? rb_insert_color+0x2e/0x280
[43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701] ? __rcu_read_unlock+0x46/0x70
[43929.458709] nft_delset+0xff/0x110 [nf_tables]
[43929.458769] nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] |
| jmespath.rb (aka JMESPath for Ruby) before 1.6.1 uses JSON.load in a situation where JSON.parse is preferable. |
| In Mbed TLS before 2.28.0 and 3.x before 3.1.0, psa_cipher_generate_iv and psa_cipher_encrypt allow policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application. |
| Heap-based buffer overflow in PolarSSL 1.x before 1.2.17 and ARM mbed TLS (formerly PolarSSL) 1.3.x before 1.3.14 and 2.x before 2.1.2 allows remote SSL servers to cause a denial of service (client crash) and possibly execute arbitrary code via a long hostname to the server name indication (SNI) extension, which is not properly handled when creating a ClientHello message. NOTE: this identifier has been SPLIT per ADT3 due to different affected version ranges. See CVE-2015-8036 for the session ticket issue that was introduced in 1.3.0. |
| An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. An adversary with access to precise enough information about memory accesses (typically, an untrusted operating system attacking a secure enclave) can recover an RSA private key after observing the victim performing a single private-key operation, if the window size (MBEDTLS_MPI_WINDOW_SIZE) used for the exponentiation is 3 or smaller. |
| An issue was discovered in Arm Mbed TLS before 2.16.6 and 2.7.x before 2.7.15. An attacker that can get precise enough side-channel measurements can recover the long-term ECDSA private key by (1) reconstructing the projective coordinate of the result of scalar multiplication by exploiting side channels in the conversion to affine coordinates; (2) using an attack described by Naccache, Smart, and Stern in 2003 to recover a few bits of the ephemeral scalar from those projective coordinates via several measurements; and (3) using a lattice attack to get from there to the long-term ECDSA private key used for the signatures. Typically an attacker would have sufficient access when attacking an SGX enclave and controlling the untrusted OS. |
| An issue was discovered in Mbed TLS 2.18.0 through 2.28.x before 2.28.8 and 3.x before 3.6.0, and Mbed Crypto. The PSA Crypto API mishandles shared memory. |
| An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX. |
| Heap-based buffer overflow in ARM mbed TLS (formerly PolarSSL) 1.3.x before 1.3.14 and 2.x before 2.1.2 allows remote SSL servers to cause a denial of service (client crash) and possibly execute arbitrary code via a long session ticket name to the session ticket extension, which is not properly handled when creating a ClientHello message to resume a session. NOTE: this identifier was SPLIT from CVE-2015-5291 per ADT3 due to different affected version ranges. |
| Mbed TLS 2.x before 2.28.5 and 3.x before 3.5.0 has a Buffer Overflow. |
| Arm Mbed TLS before 2.19.0 and Arm Mbed Crypto before 2.0.0, when deterministic ECDSA is enabled, use an RNG with insufficient entropy for blinding, which might allow an attacker to recover a private key via side-channel attacks if a victim signs the same message many times. (For Mbed TLS, the fix is also available in versions 2.7.12 and 2.16.3.) |
| A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly. |
| Insufficient policy enforcement in DevTools in Google Chrome on Windows prior to 103.0.5060.53 allowed an attacker who convinced a user to install a malicious extension to obtain potentially sensitive information from a user's local files via a crafted HTML page. |
| Microarchitectural Fill Buffer Data Sampling (MFBDS): Fill buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf |
| Microarchitectural Load Port Data Sampling (MLPDS): Load ports on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf |
| Microarchitectural Store Buffer Data Sampling (MSBDS): Store buffers on some microprocessors utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. A list of impacted products can be found here: https://www.intel.com/content/dam/www/public/us/en/documents/corporate-information/SA00233-microcode-update-guidance_05132019.pdf |
| A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits. |
| vim is vulnerable to Heap-based Buffer Overflow |
| Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2. |
