| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MSFT: validate evt_prefix_len against the response length
read_supported_features() only checks that the response covers the fixed
part of struct msft_rp_read_supported_features, which is 11 bytes:
if (skb->len < sizeof(*rp)) {
bt_dev_err(hdev, "MSFT supported features length mismatch");
goto failed;
}
evt_prefix[] is a flexible array member and rp->evt_prefix_len is an
unvalidated u8 taken straight out of that response, so
msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
GFP_KERNEL);
copies up to 255 bytes from a reply that may have carried none of them.
What is copied is data the controller never sent, and it is then used to
match incoming vendor events in msft_vendor_evt().
This is not an out-of-bounds access. An skb data allocation always has
at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the
payload, which is more than the 255 byte maximum, so the read stays
inside the allocation and KASAN does not report it. It is still a read
of bytes the host was never given, with the length fully controlled by
the controller.
Reject a response that is too short for the prefix it declares.
Verified with an emulated controller over /dev/vhci on a KASAN kernel,
with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk
and btrtl do unconditionally. A reply of exactly 11 bytes declaring
evt_prefix_len = 255 reaches kmemdup and copies 255 bytes
("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since
the reply ends at the fixed part, all 255 come from past the end of the
response. No KASAN report is produced, as expected from the allocation
slack described above. With this patch the response is rejected with
"MSFT event prefix length mismatch" and msft->evt_prefix is left unset. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the HCI command when it is cancelled
mgmt_hci_cmd_sync() queues the pending command with a NULL destroy
callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled
entry is leaked, as _hci_cmd_sync_cancel_entry() does not release
entry->data when there is no destroy callback, and hci_cmd_sync_clear()
cancels every pending entry when the controller is unregistered. Nothing
else reclaims it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. The now-empty done label is
replaced by a direct return. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: free the mesh send cancel command when it is cancelled
mesh_send_cancel() queues the pending command with a NULL destroy
callback, so it is only freed if send_cancel() runs. A cancelled entry is
leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when
there is no destroy callback, and hci_cmd_sync_clear() cancels every
pending entry when the controller is unregistered. Nothing else reclaims
it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths
adv_timeout_expire() hands a kmalloc()ed instance byte to
hci_cmd_sync_queue() with a NULL destroy callback, and only
adv_timeout_expire_sync() frees it. That leaks on two paths:
- the return value is not checked, and hci_cmd_sync_queue() does not
take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM);
- a cancelled entry is not released, as _hci_cmd_sync_cancel_entry()
does not free entry->data when there is no destroy callback.
hci_cmd_sync_clear() cancels every pending entry when the controller
is unregistered.
Free the buffer from a destroy callback, and in the caller when the entry
could not be queued at all. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: airoha: add missed IRQ resource helpers
Without hooking .irq_request_resources, gpiolib cannot set
GPIOD_FLAG_USED_AS_IRQ. This breaks pin direction locking and can allow
userspace or another driver to reconfigure an active IRQ pin as an output |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: flush active metadata block group at btree_writepages() start
btree_writepages() writes the btree inode's dirty metadata in ascending
logical address order. On a zoned filesystem only one metadata and one
system block group is active for writing at a time, and
check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the
active block group as writeback moves from one block group to the next.
If the active block group sits at a higher logical address than another
block group that also holds dirty metadata, the ascending walk reaches
the lower one first and, to write it, has to finish the active block
group and activate the lower one. It cannot finish a block group that
still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit)
writeback it deliberately refuses to wait for that IO under
fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot
issue the submission itself either, so it gives up:
btrfs_check_meta_write_pointer() returns -EAGAIN, which
btrfs_write_and_wait_transaction() treats as fatal and aborts the
transaction, forcing the filesystem read-only. This happens
intermittently under metadata-heavy relocation (e.g. fstests btrfs/187).
Flush the active metadata and system block groups at the start of
btree_writepages(), under the fs_info->zoned_meta_io_lock it already
holds, so they have no unsent IO left and the later pivot can finish
them and make forward progress. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: qcom-cpucp: handle NULL data in send_data callback
mailbox_clear_channel() calls mbox_send_message() with NULL data to
notify the remote side that the RX channel has been cleared.
qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer,
causing a NULL pointer dereference kernel panic when invoked from
this path under PREEMPT_RT.
Add an explicit NULL check and return early without writing to the
TX register, which is the correct behaviour for a channel-clear
notification. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args
On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc
args. However, the RV64 JIT currently does not perform sign-extension for
such kfunc args.
Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register
liveness analysis"), state pruning could potentially omit zero-extension
of 32-bit subregisters, which inadvertently masked the above issue by making
the args appear as if they had been properly sign-extended. After that
commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4
selftest to fail.
Fix this by extending the existing sign-extension logic to handle signed
1-byte and 2-byte kfunc args as well. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: haptic: don't write an uninitialized value to unhandled usages
fill_effect_buf() initializes value only for the four haptic usages
handled by its switch, but writes it to field->value[] for every usage.
An unhandled usage can therefore receive either an uninitialized value
or one left over from the previous usage. hid_output_report() then
serializes that value into the effect's report buffer.
Skip unhandled usages instead. This also matches switch_mode(), which
only updates fields it recognizes.
Found with Clang's -Wconditional-uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero, and the unbind thread blocks on wait_for_completion(&released).
When the user thread closes the file descriptor, it drops the final
reference, invoking the device release callback release_card_device(),
which calls snd_card_do_free(). snd_card_do_free() performs cleanup and
calls complete(card->release_completion). This wakes up the unbind thread,
which returns from snd_card_free() and __snd_card_release(). The devres
core then immediately frees the memory block containing the snd_card
structure.
Meanwhile, the user thread continues execution in snd_card_do_free() and
evaluates `if (!card->managed)`. It reads the `managed` boolean from the
snd_card structure that was just freed by the unbind thread, triggering a
KASAN use-after-free.
Fix this by caching the value of card->managed in a local variable before
calling complete(). This ensures that the card pointer is not dereferenced
after the unbind thread has been woken up and potentially freed the card.
BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604
[inline]
BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0
sound/core/init.c:153
Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
snd_card_do_free sound/core/init.c:604 [inline]
release_card_device+0x1ab/0x1b0 sound/core/init.c:153
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
snd_card_file_remove+0x331/0x390 sound/core/init.c:1125
snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986
__fput+0x418/0xa50 fs/file_table.c:512
fput_close_sync+0x11f/0x240 fs/file_table.c:617
__do_sys_close fs/open.c:1511 [inline]
__se_sys_close fs/open.c:1496 [inline]
__x64_sys_close+0x7e/0x110 fs/open.c:1496
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: retry verity reads for not-uptodate Merkle folios
btrfs_read_merkle_tree_page() can find a folio in the mapping that is not
uptodate. After taking the folio lock, the current code treats that state
as a read error and returns -EIO.
That can make a previous transient read failure sticky. If the failed read
left a not-uptodate folio in the mapping, later callers find that folio and
fail instead of retrying the read.
Keep the existing page-cache insertion and locking order, but retry the
Merkle item read when a not-uptodate folio is found in the mapping. Also
unlock the folio when read_key_bytes() fails so that a later caller can
lock it and retry the read. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| HUBzero CMS through 2.2.32 contains a path traversal vulnerability in project file upload handlers that allows authenticated project members to write arbitrary files outside the project repository. Attackers can supply traversal sequences in upload parameters to write files to attacker-chosen paths with web server privileges, potentially enabling code execution. |
| vm2 versions 3.10.2 through 3.11.6 contain a sandbox escape vulnerability on Node.js 26 where Promise.prototype.finally() bypasses vm2's wrapper protections due to a stale PromiseThenLookupChain protector in V8 14.6. Attackers can exploit this by creating an async function that returns a Promise with an attacker-controlled constructor Symbol.species, allowing them to reach the host Function constructor and process object for arbitrary code execution. |
| vm2 versions 3.11.3 through 3.11.6 expose Node.js's host node:sqlite module to code running in NodeVM when that builtin is permitted, either explicitly or through builtin: ['*']. The module is wrapped with vm.readonly(), which prevents property assignment but leaves host-authority callables reachable; in addition, the resolver treats any request starting with 'node:' as a core-module request and the runtime strips only one 'node:' prefix, so a sandbox request for 'node:node:sqlite' resolves to the configured node:sqlite entry. Sandboxed code can therefore create an in-memory DatabaseSync with extension loading enabled and call DatabaseSync.loadExtension() on a native library bundled in the untrusted plugin package (path derived from __dirname). SQLite loads the library into the Node.js host process and invokes its native entry point, giving the sandboxed plugin arbitrary native code execution outside the sandbox with the host process's privileges. The issue is fixed in vm2 3.11.7. |
| vm2 is a sandbox for running untrusted Node.js code. In versions <= 3.11.7, NodeVM exposes the host `util` module to the sandbox as an unfiltered shallow copy (`Object.assign({}, util)` in `defaultBuiltinLoaderUtil`), and the deprecated `sys` builtin (an alias of host `util`) is exposed through the generic builtin loader. On Node.js >= 22.9 this hands sandboxed code `util.getCallSites()`, a programmatic stack-introspection API that returns the host process's full call stack, including absolute file paths, function names, and line numbers for vm2 bridge internals and the embedding application's entrypoint. This bypasses the host-frame redaction introduced for GHSA-v27g-jcqj-v8rw, which only applies to the `Error.prepareStackTrace` formatting channel. The issue is fixed in vm2 3.11.8. |
| Grav is a flat-file CMS. In versions 2.0.0-rc.1 through 2.0.21, the Twig content sandbox fails to restrict the dump and serialize filters (print_r, vardump, json_encode, yaml_encode, string): GravExtension::assertSandboxDumpSafe() determines sandbox state by calling SandboxExtension::isSandboxed() without a Source argument, which reports only the global sandbox flag that Grav never enables, so the guard added in GHSA-mc5q-6hpj-rp7j never executes. As a result, an authenticated user with page-edit rights can render {{ config|print_r }} in page content with Twig processing enabled and dump Grav's entire merged configuration — print_r reflects the real Config object held in a private property of the SandboxConfig facade, bypassing its path redaction — exposing plugin secrets such as SMTP credentials, API tokens, webhook secrets and cache backend passwords. Grav 1.7 is not affected because it ships no Twig content sandbox. The issue is fixed in 2.0.22, where the affected filters are registered with Twig's needs_is_sandboxed flag. |
| AVideo through c3edcc274c389816d434acadac07ee78eaf330c1 uses cryptographically weak uniqid() values for RTMP publish keys in LiveTransmition, reducing key entropy to approximately one million possibilities per creation second. Attackers who know the channel creation time can brute-force the five-digit microsecond component to forge valid stream keys and broadcast content as the channel owner. |
