| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| @fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP server. In versions 12.8.1 through 12.8.3, its buildURL function checked the attacker-supplied source string for parent-directory segments, but when the source begins with the same special scheme as the base, such as http or https, the WHATWG URL parser drops the scheme and resolves the remainder as a relative path. A payload that glues the scheme to a percent-encoded parent-directory sequence therefore passes the check, because the inspected segment reads as the scheme plus the dots rather than a bare parent-directory token, while the proxy forwards the encoded traversal unchanged. An upstream that percent-decodes the request path before resolving dot-segments then serves a path outside the configured prefix, so an unauthenticated client scoped to an upstream prefix, or relying on Fastify route guards in front of the proxy, can escape that prefix and reach sibling or parent upstream endpoints. The per-segment check added in 12.8.1 is what the scheme prefix bypasses, and releases up to 12.8.0 already rejected the decoded form. The issue is fixed in @fastify/reply-from 12.8.4, and users should upgrade to 12.8.4 or later. |
| @fastify/http-proxy is a Fastify plugin that proxies HTTP and WebSocket traffic to an upstream server. In versions before 11.6.10, it rejects destinations containing parent-directory path segments by an exact string match, so a segment that carries a semicolon path parameter, such as a dot-dot segment followed by a semicolon and an optional parameter, is not equal to the plain dot-dot form and passes the check, and the WHATWG URL parser keeps it as an ordinary segment so the rewrite-prefix containment check also passes. Servlet containers such as Apache Tomcat and Jetty strip semicolon path parameters from each segment before resolving dot-segments, so a request routed through the configured prefix is rewritten and reaches the upstream where it resolves above the intended subtree, escaping the path the proxy is meant to expose and, on some containers, crossing application contexts. Both the HTTP and WebSocket proxy paths are affected. The issue is fixed in @fastify/http-proxy 11.6.10, and users should upgrade to 11.6.10 or later. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in PublishPress PublishPress Authors publishpress-authors allows Blind SQL Injection.This issue affects PublishPress Authors: from n/a through 4.18.0. |
| StorageGRID (formerly StorageGRID Webscale) versions 12.1.0 and higher are susceptible to an information exposure vulnerability which allows a remote unauthenticated attacker to acquire low-sensitivity credentials via a Man-in-the-middle attack when certain non-default features are enabled. |
| Bar Assistant 3.0.0 before 6.11.0 contains an authorization bypass vulnerability in BarController::join that allows authenticated users to join bars without a valid invite code. Attackers can send POST requests to /api/bars/join omitting invite_code, matching invite-disabled bars with NULL codes, to read cocktails, ingredients, members, settings and search tokens. |
| FFmpeg 7.0 through 9.0.2 contains an out-of-bounds read vulnerability in dvdvideo_menu_next_ps_block() in libavformat/dvdvideodec.c when demuxing DVD menu domains. Attackers can craft a DVD image whose last cell sector and NAV next-VOBU pointer bypass the end-of-cell check, overreading pgc->cell_playback and crashing the process. |
| A flaw was found in Keycloak. When a client application enforces step-up authentication or multi-factor authentication (MFA) via a minimum authentication level, Keycloak fails to apply this requirement to login sessions initiated through the credential reset endpoint. An attacker who possesses a user's initial credentials (such as a password) can navigate from the reset interface back to the standard login form and authenticate without completing the required second factor. This flaw allows an attacker to obtain valid access tokens and gain unauthorized access to protected services without satisfying mandatory security controls. |
| NVIDIA TensorRT-LLM for any platform contains a vulnerability where a user may cause a race condition by running concurrent requests. A successful exploit of this vulnerability may lead to data tampering. |
| A flaw was found in Keycloak. The OpenID Connect (OIDC) logout endpoint continues to honor post-logout redirect rules for disabled clients rather than rejecting the requests. If a disabled client retains permissive redirect configurations, a remote attacker can exploit this issue by supplying an arbitrary redirection target in a logout request, leading to an open redirect that can be used in phishing attacks. |
| A flaw was found in Keycloak. When evaluating access permissions, Keycloak Authorization Services improperly matches resource paths containing wildcard file extensions by evaluating only the file extension suffix and ignoring configured path prefixes. An authenticated remote attacker could exploit this vulnerability by requesting a restricted resource that shares a file extension with a more permissive resource, leading to an authorization bypass and unintended access to protected data. |
| A flaw was found in crun. When copying files onto a tmpfs mounted with tmpcopyup, crun opens the destination a second time by name. A container that shares a writable volume with the container being created can change that path between the two lookups, so crun copies image files onto host files, including files under /proc/sys. |
| A security flaw has been discovered in nodejs undici up to 7.24.0. This affects the function Object.assign of the file balanced-pool.js of the component BalancedPool. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 7.24.1 is able to mitigate this issue. The patch is identified as 0d7ec33ff37563d3e7c98d11d7bca736f330d156. You should upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: keep gc's cleanup out of the live tree on allocation failure
assoc_array_gc() builds a copy of the tree. Where the copy reaches a
shortcut, it allocates the copy of the shortcut with kmalloc_flex(),
fills it with memcpy(), links it into the new tree, and only then
allocates the copy of the node after it. The memcpy() leaves the new
shortcut's next_node pointing at the old tree's node, so if that second
allocation fails, the cleanup, assoc_array_destroy_subtree() on the new
tree, follows the new shortcut into the old tree, and the BUG_ON() on
the old node's back pointer fires.
Allocate the node first, and the shortcut once the node exists, freeing
the node again if the shortcut cannot be allocated. A copied shortcut
is then only linked into the new tree when the copy of its node is there
to follow it. Nothing else changes: with no allocation failing, the
trees gc builds are the same as before.
Found by a userspace test that makes each allocation of each operation
fail in turn. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: don't chain a new shortcut onto an existing one
When a full node's leaves and the new key all share the node's segment,
assoc_array_insert_into_terminal_node() replaces the node with a
shortcut to a pair of new nodes. If the node is itself the target of a
shortcut, the new shortcut is installed as that shortcut's next node,
and a shortcut leading to a shortcut is something nothing expects:
assoc_array_walk() indexes the second one as a node, and
assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts
nr_leaves_on_branch, on that same insertion.
Deletion gets a node there. When the subtree below a shortcut shrinks
enough, assoc_array_delete() collapses it into one node below the
shortcut, and the leaves it collects can all share that node's segment.
The next key that shares it too takes this path. Eighteen insertions
and a deletion are enough: sixteen keys that agree on bits 0-11, one
that leaves them at bit 8 and is deleted again, and one more that agrees
with the sixteen.
Have the new shortcut replace the one in front of the node as well.
assoc_array_insert_shortcut() gives it that shortcut's back pointer and
parent slot, so the caller installs it where that one was, and excises
the old shortcut along with the node, which takes a second entry in
excised_meta[]. The new shortcut's index key comes from the new key up
to the new skip level, so it covers what the old one did.
Found by a userspace test doing random insertions and deletions on keys
that share long prefixes; a targeted case builds a shortcut, deletes
down to the collapse and inserts one more key. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA
Generally userspace is going to step the dirty bitmap through the IOVA
space. However if the bitmap ends in the middle of a large PTE this is
problematic. The first step will clear the dirty bit and report dirty to
the end of its bitmap while the second step will see the clear'd dirty and
report clean for the start of the bitmap. If it happens this ends up
losing dirties.
Further this function is missing bounds checking so if this does happen
ther is a good chance it will write memory beyond what the userspace was
expecting.
Return an error code if this illegal condition happens. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: release a removed xattr node in roll-forward recovery
When xattrs shrink enough to fit in the inline xattr area,
write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If
the file is then fsynced without a checkpoint, only the inode block is
written, with i_xattr_nid of 0.
Roll-forward recovery starts from the checkpointed inode, whose
i_xattr_nid still points to the old xattr node.
f2fs_recover_inline_xattr() copies only the inline xattr area, and
f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps
the stale xattr node:
- The node block is never released, and fsck reports "nonzero bytes in
xattr space after end of list".
- If the inline xattr list ends exactly at the end of the inline area,
its terminator is read from the stale node, and the removed xattrs
come back after recovery.
When the fsynced inode has no xattr node but the checkpointed one has,
release the old xattr node as truncate_node() does: check its block
address, invalidate the block and drop its node cache, which may still
be dirty. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential reference count leak in do_garbage_collect()
In do_garbage_collect(), we have reserved reference counts on summary cache
of all segments, once gc_thread encounter freezing, we need to release all
reference counts. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Stop the target vcpu when disabling LPIs
Disabling LPIs is pretty nasty, as it directly messes with the AP list
of the affected CPU, which could be running... This has the potential to
lead to really bad behaviours, and we should not be doing that.
Take example on the way the Active state is handled and simply pause the
the vcpu so that we are sure it is in a quiescent state, and the state be
safely manipulated.
Nobody has any expectation of performance for this anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: bound the SIT/NAT bitmaps by the checkpoint pack
sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy
lengths into and out of sbi->ckpt, which is sized from cp_payload alone,
and nothing compares either length against that allocation.
sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which
added them after a crafted image overran build_sit_info(). That check ties
each length to a segment count; it never compares either against the
allocation, which is the half this adds.
Mounting over-reads in build_sit_info() and build_node_manager(), and the
first checkpoint writes the same lengths back through the same pointers,
so the over-read's contents reach the on-disk checkpoint. An unmount is
enough; the filesystem does not have to be used.
Bound both ends the way __bitmap_ptr() lays them out. The three branches
differ, so a single sum of the two lengths would still admit a small
overflow when cp_payload is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: return -EIO for a lost inode block after cp_error
After cp_error, dirty node caches are dropped without being written.
If such an inode was never written, its NAT entry is still NEW_ADDR,
and reading its inode block returns -ENOENT.
f2fs_get_dnode_of_data() passes that -ENOENT up, and callers take it
as a hole. Since the inode block is missing, the next offset can only
advance one block, so fiemap walks block by block up to maxbytes,
about 2^30 blocks, while holding the inode lock. It took hours in a
power-off recovery test after shutdown and blocked unlink and umount
on the file.
Return -EIO instead of -ENOENT when the inode block itself is missing
after cp_error or shutdown. A missing direct or indirect node is still
reported as -ENOENT. |