| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: invalidate dentry cache on failed whiteout creation
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink() |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-cache: fix a deadlock in r5l_exit_log()
Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing
work") introduce a new problem:
// caller hold reconfig_mutex
r5l_exit_log
flush_work(&log->disable_writeback_work)
r5c_disable_writeback_async
wait_event
/*
* conf->log is not NULL, and mddev_trylock()
* will fail, wait_event() can never pass.
*/
conf->log = NULL
Fix this problem by setting 'config->log' to NULL before wake_up() as it
used to be, so that wait_event() from r5c_disable_writeback_async() can
exist. In the meantime, move forward md_unregister_thread() so that
null-ptr-deref this commit fixed can still be fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix resource leak in ksmbd_session_rpc_open()
When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to
undo the result of ksmbd_ipc_id_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: Fix synchronous external abort on unbind
A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is
executed after the configuration sequence described above:
modprobe usb_f_ecm
modprobe libcomposite
modprobe configfs
cd /sys/kernel/config/usb_gadget
mkdir -p g1
cd g1
echo "0x1d6b" > idVendor
echo "0x0104" > idProduct
mkdir -p strings/0x409
echo "0123456789" > strings/0x409/serialnumber
echo "Renesas." > strings/0x409/manufacturer
echo "Ethernet Gadget" > strings/0x409/product
mkdir -p functions/ecm.usb0
mkdir -p configs/c.1
mkdir -p configs/c.1/strings/0x409
echo "ECM" > configs/c.1/strings/0x409/configuration
if [ ! -L configs/c.1/ecm.usb0 ]; then
ln -s functions/ecm.usb0 configs/c.1
fi
echo 11e20000.usb > UDC
echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind
The displayed trace is as follows:
Internal error: synchronous external abort: 0000000096000010 [#1] SMP
CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs]
lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs]
sp : ffff8000838b3920
x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810
x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000
x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020
x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344
x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000
x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80
Call trace:
usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P)
usbhsg_pullup+0x4c/0x7c [renesas_usbhs]
usb_gadget_disconnect_locked+0x48/0xd4
gadget_unbind_driver+0x44/0x114
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
device_release_driver+0x18/0x24
bus_remove_device+0xcc/0x10c
device_del+0x14c/0x404
usb_del_gadget+0x88/0xc0
usb_del_gadget_udc+0x18/0x30
usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs]
usbhs_mod_remove+0x20/0x30 [renesas_usbhs]
usbhs_remove+0x98/0xdc [renesas_usbhs]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xb8
drv_attr_store+0x24/0x38
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x128/0x1b8
vfs_write+0x2ac/0x350
ksys_write+0x68/0xfc
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021)
---[ end trace 0000000000000000 ]---
note: sh[188] exited with irqs disabled
note: sh[188] exited with preempt_count 1
The issue occurs because usbhs_sys_function_pullup(), which accesses the IP
registers, is executed after the USBHS clocks have been disabled. The
problem is reproducible on the Renesas RZ/G3S SoC starting with the
addition of module stop in the clock enable/disable APIs. With module stop
functionality enabled, a bus error is expected if a master accesses a
module whose clock has been stopped and module stop activated.
Disable the IP clocks at the end of remove. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid double brelse() in udf_rename()
syzbot reported a warning like below [1]:
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
<TASK>
invalidate_bh_lru+0x99/0x150
smp_call_function_many_cond+0xe2a/0x10c0
? generic_remap_file_range_prep+0x50/0x50
? __brelse+0xa0/0xa0
? __mutex_lock+0x21c/0x12d0
? smp_call_on_cpu+0x250/0x250
? rcu_read_lock_sched_held+0xb/0x60
? lock_release+0x587/0x810
? __brelse+0xa0/0xa0
? generic_remap_file_range_prep+0x50/0x50
on_each_cpu_cond_mask+0x3c/0x80
blkdev_flush_mapping+0x13a/0x2f0
blkdev_put_whole+0xd3/0xf0
blkdev_put+0x222/0x760
deactivate_locked_super+0x96/0x160
deactivate_super+0xda/0x100
cleanup_mnt+0x222/0x3d0
task_work_run+0x149/0x240
? task_work_cancel+0x30/0x30
do_exit+0xb29/0x2a40
? reacquire_held_locks+0x4a0/0x4a0
? do_raw_spin_lock+0x12a/0x2b0
? mm_update_next_owner+0x7c0/0x7c0
? rwlock_bug.part.0+0x90/0x90
? zap_other_threads+0x234/0x2d0
do_group_exit+0xd0/0x2a0
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that brelse() is called on both ofibh.sbh
and ofibh.ebh by udf_find_entry() when it returns NULL. However,
brelse() is called by udf_rename(), too. So, b_count on buffer_head
becomes unbalanced.
This patch fixes the issue by not calling brelse() by udf_rename()
when udf_find_entry() returns NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail()
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).
Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page). |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
Smatch reports:
drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe()
warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516.
timer_baseaddr may have the problem of not being released after use,
I replaced it with the devm_of_iomap() function and added the clk_put()
function to cleanup the "clk_ce" and "clk_cs". |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match().
smc_clc_prfx_match() is called from smc_listen_work() and
not under RCU nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the returned value of smc_clc_prfx_match() is not
used in the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix underflow in chain reference counter
Set element addition error path decrements reference counter on chains
twice: once on element release and again via nft_data_release().
Then, d6b478666ffa ("netfilter: nf_tables: fix underflow in object
reference counter") incorrectly fixed this by removing the stateful
object reference count decrement.
Restore the stateful object decrement as in b91d90368837 ("netfilter:
nf_tables: fix leaking object reference count") and let
nft_data_release() decrement the chain reference counter, so this is
done only once. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix pci_device_is_present() for VFs by checking PF
pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present. Check the PF instead.
Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:
task:bash state:D stack: 0 pid: 1773 ppid: 1241 flags:0x00004002
Call Trace:
schedule+0x4f/0xc0
blk_mq_freeze_queue_wait+0x69/0xa0
blk_mq_freeze_queue+0x1b/0x20
blk_cleanup_queue+0x3d/0xd0
virtblk_remove+0x3c/0xb0 [virtio_blk]
virtio_dev_remove+0x4b/0x80
...
device_unregister+0x1b/0x60
unregister_virtio_device+0x18/0x30
virtio_pci_remove+0x41/0x80
pci_device_remove+0x3e/0xb0
This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device(). The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().
[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag] |
| In the Linux kernel, the following vulnerability has been resolved:
vfat: fix missing sb_min_blocksize() return value checks
When emulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, but without format, a kernel panic
was triggered during the early boot stage while attempting to mount a
vfat filesystem.
[95553.682035] EXT4-fs (nvme0n1): unable to set blocksize
[95553.684326] EXT4-fs (nvme0n1): unable to set blocksize
[95553.686501] EXT4-fs (nvme0n1): unable to set blocksize
[95553.696448] ISOFS: unsupported/invalid hardware sector size 8192
[95553.697117] ------------[ cut here ]------------
[95553.697567] kernel BUG at fs/buffer.c:1582!
[95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary)
[95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0
[95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f
[95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246
[95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001
[95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000
[95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000
[95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000
[95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000
[95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0
[95553.708439] PKRU: 55555554
[95553.708734] Call Trace:
[95553.709015] <TASK>
[95553.709266] __getblk_slow+0xd2/0x230
[95553.709641] ? find_get_block_common+0x8b/0x530
[95553.710084] bdev_getblk+0x77/0xa0
[95553.710449] __bread_gfp+0x22/0x140
[95553.710810] fat_fill_super+0x23a/0xfc0
[95553.711216] ? __pfx_setup+0x10/0x10
[95553.711580] ? __pfx_vfat_fill_super+0x10/0x10
[95553.712014] vfat_fill_super+0x15/0x30
[95553.712401] get_tree_bdev_flags+0x141/0x1e0
[95553.712817] get_tree_bdev+0x10/0x20
[95553.713177] vfat_get_tree+0x15/0x20
[95553.713550] vfs_get_tree+0x2a/0x100
[95553.713910] vfs_cmd_create+0x62/0xf0
[95553.714273] __do_sys_fsconfig+0x4e7/0x660
[95553.714669] __x64_sys_fsconfig+0x20/0x40
[95553.715062] x64_sys_call+0x21ee/0x26a0
[95553.715453] do_syscall_64+0x80/0x670
[95553.715816] ? __fs_parse+0x65/0x1e0
[95553.716172] ? fat_parse_param+0x103/0x4b0
[95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0
[95553.717034] ? __do_sys_fsconfig+0x3d9/0x660
[95553.717548] ? __x64_sys_fsconfig+0x20/0x40
[95553.717957] ? x64_sys_call+0x21ee/0x26a0
[95553.718360] ? do_syscall_64+0xb8/0x670
[95553.718734] ? __x64_sys_fsconfig+0x20/0x40
[95553.719141] ? x64_sys_call+0x21ee/0x26a0
[95553.719545] ? do_syscall_64+0xb8/0x670
[95553.719922] ? x64_sys_call+0x1405/0x26a0
[95553.720317] ? do_syscall_64+0xb8/0x670
[95553.720702] ? __x64_sys_close+0x3e/0x90
[95553.721080] ? x64_sys_call+0x1b5e/0x26a0
[95553.721478] ? do_syscall_64+0xb8/0x670
[95553.721841] ? irqentry_exit+0x43/0x50
[95553.722211] ? exc_page_fault+0x90/0x1b0
[95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[95553.723166] RIP: 0033:0x72ee774f3afe
[95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48
[95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
[95553.725892] RAX: ffffffffffffffda RBX:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
of_phy_find_device() return device node with refcount incremented.
Call put_device() to relese it when not needed anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix a race condition in retrieve_deps
There's a race condition in the multipath target when retrieve_deps
races with multipath_message calling dm_get_device and dm_put_device.
retrieve_deps walks the list of open devices without holding any lock
but multipath may add or remove devices to the list while it is
running. The end result may be memory corruption or use-after-free
memory access.
See this description of a UAF with multipath_message():
https://listman.redhat.com/archives/dm-devel/2022-October/052373.html
Fix this bug by introducing a new rw semaphore "devices_lock". We grab
devices_lock for read in retrieve_deps and we grab it for write in
dm_get_device and dm_put_device. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: qmi_encdec: Restrict string length in decode
The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000086000004
| EC = 0x21: IABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
| CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
| Hardware name: FVP Base RevC (DT)
| pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
| pc : 0x0
| lr : ffa_device_remove+0x20/0x2c
| Call trace:
| 0x0
| device_release_driver_internal+0x16c/0x260
| driver_detach+0x90/0xd0
| bus_remove_driver+0xdc/0x11c
| driver_unregister+0x30/0x54
| ffa_driver_unregister+0x14/0x20
| cleanup_module+0x18/0xeec
| __arm64_sys_delete_module+0x234/0x378
| invoke_syscall+0x40/0x108
| el0_svc_common+0xb4/0xf0
| do_el0_svc+0x30/0xa4
| el0_svc+0x2c/0x7c
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
In ext4_xattr_move_to_block(), the value of the extended attribute
which we need to move to an external block may be allocated by
kvmalloc() if the value is stored in an external inode. So at the end
of the function the code tried to check if this was the case by
testing entry->e_value_inum.
However, at this point, the pointer to the xattr entry is no longer
valid, because it was removed from the original location where it had
been stored. So we could end up calling kvfree() on a pointer which
was not allocated by kvmalloc(); or we could also potentially leak
memory by not freeing the buffer when it should be freed. Fix this by
storing whether it should be freed in a separate variable. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow. |
