| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authorization Bypass Through User-Controlled Key vulnerability in NSquared Simply Schedule Appointments simply-schedule-appointments allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Simply Schedule Appointments: from n/a through 1.6.12.35. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existing mount is put there for the copies.
But the loop ends at the topmost mount without ever looking at it. If
the topmost mount is the only mount namespace file in the chain
"shorter" stays NULL and mnt_change_mountpoint() attaches the existing
mount of the copy below the root of the mount namespace file. That's a
dentry of nsfs. No path walk in the copy's mount namespace ever gets
there. The mount is gone until its parent goes and the copy that took
its place can't be unmounted synchronously because it has a child:
S bind mount of a file
N bind mount of a mount namespace file on top of S
A shared mount, B a slave of A, Q mounted on B/file
move_mount(S, A/file)
cat B/file -> the content of S instead of Q
umount B/file -> EBUSY
Look at every mount of the chain including the topmost one. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| Incorrect Calculation vulnerability in VillaTheme CURCY woo-multi-currency allows Integer Attacks.This issue affects CURCY: from n/a through 2.2.17. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05. |
| A request attribute override vulnerability in Zimbra Collaboration Suite (ZCS) allows unauthenticated requests to /h/* to populate servlet attributes intended for trusted internal dispatch. RestFilter copies URL parameters specifying an authentication token, target account, target item and dispatch state into the request attributes consumed by the Classic Web Client. Combined with CVE-2026-10632 on ZCS 10.1.16, this allows an attacker to supply their own valid token and document identifiers and execute JavaScript in another user's signed-in browser session. ZCS 10.1.17 blocks that XSS chain by changing the document renderer, but retains the request attribute override. |
| odhcpd is the DHCPv6, DHCPv4, and router-advertisement server used by OpenWrt. Prior to version 25.12, odhcpd's DHCPv6 IA handler keeps a per-message `first` lease pointer so multiple IA options in one message reuse the same Reconfigure authentication key. A DHCPv6 REQUEST from an adjacent-network client can make the first IA set `first`, then make a later same-IAID IA fail the on-link check and free that same lease, leaving `first` dangling. A following IA in the same packet allocates a new lease and copies `first->key`, producing a 16-byte heap-use-after-free read. ASan confirms the UAF; native tracing shows the packet shape can deterministically reclaim the freed lease as the destination allocation, producing a zeroed Reconfigure key copy. The validated impact is unauthenticated adjacent-network denial of service and DHCPv6 Reconfigure/ForceRenew key confusion. Arbitrary PC control is not proven for this UAF alone. This issue has been patched in version 25.12. |
| A cross-account authorization vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to insert forged shared-file records into another user's mailbox through FileSharedWithMeRequest. The request bypasses delegated-account authorization and accepts attacker-selected file metadata, owner identifiers and declared sizes without validating a corresponding document share. An attacker can plant entries attributed to another real local account without that account sharing a document. No victim interaction is required. ZCS 10.1.16 and 10.1.20 are affected. |
| Wasmtime is a runtime for WebAssembly. Prior to 36.0.19, 48.0.7, and 49.0.4, the Cranelift compiler backend on aarch64 can compile a Wasm br_table instruction with more than approximately 256,000 targets so that it has an incorrect conditional branch target. The branch can then jump to arbitrary other code at a user-controlled offset, allowing a user-controlled Wasm module to escape the sandbox on aarch64 engines using the default Cranelift backend. This issue is fixed in versions 36.0.19, 48.0.7, and 49.0.4. |
| HTTP::Headers::ActionPack versions before 0.10 for Perl allow CPU exhaustion via Accept-Language ranges matched as regular expressions.
_language_match interpolates each Accept-Language range into the pattern `/^$range\-/i` without escaping it, so regular expression syntax in the header reaches the regex engine. A 12-byte range such as `(a?|b?){26}z` backtracks for seconds, and each increment of the quantifier doubles the time. An invalid range such as `(` fails to compile.
A remote attacker can exhaust CPU, or make choose_language die, in any application that passes an untrusted Accept-Language header to it. |
| Apache Pulsar allows an administrator to require end-to-end message encryption for all topics in a namespace by setting the encryption_required namespace policy. When this policy is set, the broker rejects messages that are published without encryption.
When the broker loads a persistent topic, it reads the namespace policies and the topic-level policies as part of topic initialization. If a step of this initialization fails, for example because of an error reading from the metadata store, a failure loading the topic-level policies or a failure in a later initialization step, the broker logs a warning, disables the encryption requirement for that topic, and completes the topic load as if it had succeeded. The topic is then served with encryption_required not enforced, even though the namespace policy requires it. Topic-level policies that could not be loaded are also not applied.
While the encryption requirement is not enforced, an authenticated client with permission to produce to the affected topic can publish messages that are not encrypted, and the broker accepts and stores them. This applies both to producers created after the topic was loaded and to producers that were already connected. Messages published with encryption remain encrypted; the issue does not expose the content of encrypted messages or the encryption keys.
The condition is not limited to transient failures. If the cause of the initialization failure persists, the encryption requirement is disabled again each time the topic is loaded, for example after a topic unload, a namespace bundle reassignment or a broker restart. An update to the namespace policies restores enforcement on a loaded topic, but only until the topic is loaded again. Enforcement is reliably restored only once the underlying cause of the failure has been resolved and the topic has been loaded again. The broker logs a warning when the encryption requirement is disabled, but the topic load is reported as successful and the state of the encryption requirement is not shown in the topic statistics.
In fixed versions, a failure during topic initialization causes the topic load to fail so that it can be retried, instead of loading the topic with the encryption requirement disabled.
This issue affects Apache Pulsar versions from 1.22.0-incubating before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who rely on encryption_required and cannot upgrade immediately can monitor the broker logs for warnings containing "isEncryptionRequired will be set to false" (the exact wording of the message differs between releases), resolve the underlying cause of the failure, and then reload the affected topic and confirm that the warning does not recur. |
| Vulnerability in the Siebel CRM End User product of Oracle Siebel CRM (component: Open UI). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM End User. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Siebel CRM End User accessible data. CVSS 3.1 Base Score 4.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:N). |
| baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2. |
| A mailbox quota-accounting vulnerability in Zimbra Collaboration Suite (ZCS) allows an authenticated user to consume another user’s mailbox quota by repeatedly sharing and revoking a document. Creation of the recipient’s shared-file record charges the document size to mailbox-wide usage. Revocation deletes the record and reverses its folder counters without reversing the mailbox-wide charge. Repeated normal share notifications therefore accumulate quota usage after the visible records are gone. On accounts with a finite quota, this can prevent incoming mail and other size-increasing operations without recipient interaction. The issue affects ZCS 10.1.16 and 10.1.20. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: make dirty_lock IRQ-safe
fbtft_mkdirty() can be reached from the fbcon rendering path while
processing printk() in hardirq context. Meanwhile, dirty_lock is also
taken by fbtft_deferred_io() in workqueue context with local interrupts
enabled.
Lockdep reports a possible IRQ lock inversion involving dirty_lock and
console_owner. A hardirq can interrupt a CPU holding dirty_lock and
enter the console rendering path, which can attempt to acquire
dirty_lock again.
The following lockdep report was observed on an RK3566 system with
CONFIG_PROVE_LOCKING enabled:
WARNING: possible irq lock inversion dependency detected
swapper/2/0 just changed the state of lock:
(console_owner){-...}-{0:0}
but this lock took another, HARDIRQ-unsafe lock in the past:
(&par->dirty_lock){+.+.}-{2:2}
CPU0 CPU1
---- ----
lock(&par->dirty_lock);
local_irq_disable();
lock(console_owner);
lock(&par->dirty_lock);
<Interrupt>
lock(console_owner);
*** DEADLOCK ***
Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for
fbtft_deferred_io(). They only access the dirty line range, so the
IRQ-off regions remain short. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.2, an attacker can craft a PDF with a standard cross-reference table whose declared entry count exceeds what the file can contain, causing excessive processing and long runtimes when the file is opened. This issue is fixed in version 6.21.2. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.0.0, the account-confirmation link in emails is built from the request Host header, with no allowlist. The unauthenticated POST /api/auth/resend-confirmation rotates a pending invitee's confirmation token and emails a link whose host comes from the request. An attacker who sends one resend-confirmation with Host: attacker.example and a pending invitee's email causes that invitee to receive a confirmation email whose only link points to the attacker. If the invitee clicks, the one-time confirmation token reaches the attacker, who then confirms the account on the real tenant domain and registers a passkey they control, taking over the account before the legitimate invitee ever uses it. All released versions through v1.1.0 are affected; no patched version exists yet. Reaching the app with a spoofed Host depends on the front proxy: the stock Caddy catch-all forwards it, while an operator who configures explicit per-tenant proxy blocks is not affected (see Details 4). The invite path builds links from the trusted tenant.domain (invite/+server.ts:204-210); the resend-confirmation path builds them from the request Host. This issue has been patched in version 2.0.0. |
