| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw exists in the FlashArray Purity management interface where an authenticated low-privileged user may, under specific conditions, access functionality beyond their assigned privileges. |
| Dreamweaver Desktop versions 21.7 and earlier are affected by an Incorrect Authorization vulnerability that could lead to arbitrary file system read. An attacker could exploit this vulnerability to access sensitive files and directories outside the intended access scope. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is changed. |
| Dreamweaver Desktop versions 21.7 and earlier are affected by an Access of Uninitialized Pointer vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.
Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.
When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.
In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.
Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: The implementations of AES-SIV (RFC 5297) and AES-GCM-SIV
(RFC 8452) mishandle the authentication of AAD (Additional Authenticated
Data) with an empty ciphertext allowing a forgery of such messages.
Impact summary: An attacker can forge empty messages with arbitrary AAD
to the victim's application using these ciphers.
AES-SIV (RFC 5297) and AES-GCM-SIV (RFC 8452) are nonce-misuse-resistant AEAD
modes: they accept a key, nonce, optional AAD (bytes that are authenticated
but not encrypted), and plaintext, and produces ciphertext plus a 16-byte
tag. On decrypt, `EVP_DecryptFinal_ex()` is documented to return success only
if the tag is verified succesfully.
In OpenSSL's provider implementation of these ciphers, the expected tag is
computed only when decryption function is invoked with non-empty data.
If the caller supplies AAD and then calls `EVP_DecryptFinal_ex()` without
invocation of the ciphertext update, which can happen when the received
ciphertext length is zero, the tag is never recalculated and still holds its
all-zeros value.
When AES-GCM-SIV is used, an attacker who sends arbitrary AAD, empty
ciphertext, and all-zeros tag passes authentication under any key they do not
know, single-shot. When AES-SIV is used, for mounting the attack it's
necessary for the application to reuse the decryption context without
resetting the key.
AES-SIV is implemented since OpenSSL 3.0. AES-GCM-SIV is implemented since
OpenSSL 3.2.
No protocols implemented in OpenSSL itself (TLS/CMS/PKCS7/HPKE/QUIC) support
either AES-GCM-SIV or AES-SIV. To mount an attack, the applications must
implement their own protocol and use the EVP interface. Also they must skip the
ciphertext update when a message with an empty ciphertext arrives.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as these algorithms are not FIPS approved and the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue summary: When an application drives an AES-OCB context through the
public EVP_Cipher() one-shot interface, the application-supplied
initialisation vector (IV) is silently discarded.
Impact summary: Every message encrypted under the same key uses the
same effective nonce regardless of the IV supplied by the caller,
resulting in (key, nonce) reuse and loss of confidentiality. If the
same code path is used to compute the authentication tag, the tag
depends only on the (key, IV) pair and not on the plaintext or
ciphertext, allowing universal forgery of arbitrary ciphertext from a
single captured message.
OpenSSL provides two ways to drive a cipher: the documented streaming
interface (EVP_CipherUpdate / EVP_CipherFinal_ex) and a lower-level
one-shot, EVP_Cipher(), whose documentation explicitly recommends
against use by applications in favour of EVP_CipherUpdate() and
EVP_CipherFinal_ex(). The OCB provider's streaming handler flushes
the application-supplied IV into the OCB context before processing
data; the one-shot handler did not. Every call to EVP_Cipher() on an
AES-OCB context therefore ran with the all-zero key-derived offset
state left by cipher initialisation, regardless of the caller's IV.
If EVP_EncryptFinal_ex() is subsequently used to obtain the
authentication tag, the deferred IV setup runs at that point and
clears the running checksum that should have been accumulated over the
plaintext. The resulting tag is a function of (key, IV) only and
verifies against any ciphertext produced under the same (key, IV)
pair.
The OpenSSL SSL/TLS implementation is not affected: AES-OCB is not a
TLS cipher suite, and libssl does not call EVP_Cipher() in any case.
Applications that drive AES-OCB through the documented streaming AEAD
API (EVP_CipherUpdate / EVP_CipherFinal_ex) are not affected. Only
applications that combine the AES-OCB cipher with the EVP_Cipher()
one-shot API are vulnerable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as AES-OCB is outside the OpenSSL FIPS module boundary. |
| Issue summary: When the X509_VERIFY_PARAM_set1_email is called by an
application to validate a crafted e-mail address, such as during S/MIME
message validation, an out of bounds read can happen.
Impact summary: This out of bounds read will not directly exfiltrate
the data read to the attacker so the most likely result is a crash and
a Denial of Service.
An internal helper function called from X509_VERIFY_PARAM_[set|add]_email()
used a wrong length when validating the local part of an email address.
This could cause the 64 octet limit on the local part of an email address
to be not enforced, or cause an out of bound read and potentially a crash.
The bug is reachable via S-MIME validation with a crafted From: address
supplied in an email message that can potentially cause a crash.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Shenzhen Tenda Technology Co., Ltd Tenda W20E v15.11.0.6 was discovered to contain a buffer overflow in the webAuthUserInfo parameter of the formAddWebAuthUser function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request. |
| A markdown based cross-site scripting (XSS) vulnerability in the AI assistant chat function of FastapiAdmin v2.2.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into a chat message. |
| Insecure permissions in bookcars v8.3 allows authenticated attackers to escalate privileges from user to admin via modifying their user type. |
| Substance3D - Sampler versions 6.0.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive
element whose content exceeds 2 gigabytes in length may cause a heap buffer
over-read on 64-bit Unix and Unix-like platforms.
Impact summary: The heap buffer over-read may crash the application (Denial of
Service) or to load into the decoded ASN.1 object contents of memory beyond the
end of the input buffer. More typically such ASN.1 elements would instead be
truncated.
An integer truncation in OpenSSL's ASN.1 decoder causes the content length of
an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the
worst case the truncated length is treated as a request to scan the binary
content for a terminating zero byte, possibly causing OpenSSL to read either
less than or beyond the end of the allocated buffer.
Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or
any other d2i_* decoding function are affected. OpenSSL's own command-line
tools are not vulnerable, as data read through the BIO layer is checked before
it reaches the affected code. The issue only affects 64-bit Unix and Unix-like
platforms; 32-bit platforms and 64-bit Windows are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
| An issue was discovered in bitbank2 AnimatedGIF v2.2.0. A buffer overflow in the DecodeLZW function allows remote attackers to cause a denial of service (crash) or potentially execute arbitrary code via a crafted GIF file. |
| SQLite before 3.53.2 contains a heap-based buffer overflow vulnerability in the FTS5 full-text search extension that allows attackers to cause a crash or execute arbitrary code by supplying a crafted database with malicious continuation page metadata specifying a szLeaf value smaller than 4. Attackers can trigger an integer underflow in fts5ChunkIterate() causing an inflated remaining byte count during FTS5 MATCH query processing, leading to a heap buffer overflow of attacker-controlled data in applications compiled with SQLITE_ENABLE_FTS5. |
| A flaw was found in Keycloak. A limited administrator can exploit an improper access control vulnerability in the POST /admin/realms/{realm}/partialImport endpoint. This allows them to bypass Fine-Grained Admin Permissions (FGAP) and escalate their privileges to a full realm administrator by importing users with realm-admin role mappings. |
| Shenzhen Kangda Xin Intelligent Network Technology Company's router, model DR300, version 2.1.2.121, contains hardcoded login credentials and has telnet enabled by default on WAN and LAN interfaces. These vulnerabilities allow attackers to read and write to memory, modify firmware stored in flash, inspect active connections, and view currently connected devices. |
| A NULL pointer dereference in the gf_odf_vvc_cfg_write_bs function (odf/descriptors.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| A stack buffer overflow in the filein_process function (in_file.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. |
| An issue was discovered in Malwarebytes 4.x and 5.x (and Nebula 2020-10-21 and later). A large number of Firefox preference files can cause the parser to ignore other browser configuration files, leading to a denial of service. |
| The utility functions used by Malwarebytes EDR 1.0.11 on Linux for calculating a cryptographic hash of data bytes truncate the hashed data if it exceeds 4GB. This leads to an integer wrap-around if the data is larger than the maximum unsigned integer value (32-bit). Attackers could create a colliding hash value for two different strings by attaching 4GB of data to a string that is less than 4GB in size. |
