| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PHPUnit is a testing framework for PHP. In versions 12.5.21 and 13.1.5, PHPUnit forwards PHP INI settings to child processes (used for isolated/PHPT test execution) as -d name=value command-line arguments without neutralizing INI metacharacters. Because PHP's INI parser interprets " as a string delimiter, ; as the start of a comment, and most importantly a newline as a directive separator, a value containing a newline is parsed by the child process as multiple INI directives. An attacker able to influence a single INI value can therefore inject arbitrary additional directives into the child's configuration, including auto_prepend_file, extension, disable_functions, open_basedir, and others. Setting auto_prepend_file to an attacker-controlled path yields remote code execution in the child process. This issue has been patched in versions 12.5.22 and 13.1.6. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow. |
| When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash. |
| nanoMODBUS through v1.22.0 has a stack-based buffer overflow in recv_read_registers_res() in nanomodbus.c. When a client calls nmbs_read_holding_registers() or nmbs_read_input_registers(), the library writes register data from the server response to the caller-provided buffer based on the response's byte_count field before validating that byte_count matches the requested quantity. A malicious Modbus TCP server can send a response with byte_count=250 (125 registers) regardless of the requested quantity, causing up to 248 bytes of attacker-controlled data to overflow the buffer, potentially allowing remote code execution. |
| An issue was discovered in kosma minmea 0.3.0. The minmea_scan functions format specifier copies NMEA field data to a caller-provided buffer without a size parameter. Applications using minmea_scan on untrusted input are vulnerable to a stack buffer overflow. |
| Directory Traversal vulnerability in fohrloop dash-uploader v.0.1.0 through v.0.7.0a2 allows a remote attacker to execute arbitrary code via the dash_uploader/httprequesthandler.py, aseHttpRequestHandler.get_temp_root(), BaseHttpRequestHandler._post() components |
| RedwoodSDK is a server-first React framework. From version 1.0.0-beta.50 to before version 1.2.3, server actions in rwsdk apply HTTP method enforcement but no origin validation. A request originating from a different origin that the browser treats as same-site can invoke a server action with the victim's session cookie attached. This issue has been patched in version 1.2.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Set DMA segment size to avoid debug warnings
When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the
kernel occasionally reports a segment size mismatch. This is because
'max_seg_size' is not set. The kernel defaults to 64K. setting
'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'
from complaining about the over-mapping of the V3D segment length.
DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device
claims to support [len=8290304] [max=65536]
WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388
CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1
Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_dma_map_sg+0x330/0x388
lr : debug_dma_map_sg+0x330/0x388
sp : ffff8000829a3ac0
x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000
x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000
x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002
x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff
x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573
x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000
x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c
x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001
x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280
Call trace:
debug_dma_map_sg+0x330/0x388
__dma_map_sg_attrs+0xc0/0x278
dma_map_sgtable+0x30/0x58
drm_gem_shmem_get_pages_sgt+0xb4/0x140
v3d_bo_create_finish+0x28/0x130 [v3d]
v3d_create_bo_ioctl+0x54/0x180 [v3d]
drm_ioctl_kernel+0xc8/0x140
drm_ioctl+0x2d4/0x4d8 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify
Invalidating a dmabuf will impact other users of the shared BO.
In the scenario where process A moves the BO, it needs to inform
process B about the move and process B will need to update its
page table.
The commit fixes a synchronisation bug caused by the use of the
ticket: it made amdgpu_vm_handle_moved behave as if updating
the page table immediately was correct but in this case it's not.
An example is the following scenario, with 2 GPUs and glxgears
running on GPU0 and Xorg running on GPU1, on a system where P2P
PCI isn't supported:
glxgears:
export linear buffer from GPU0 and import using GPU1
submit frame rendering to GPU0
submit tiled->linear blit
Xorg:
copy of linear buffer
The sequence of jobs would be:
drm_sched_job_run # GPU0, frame rendering
drm_sched_job_queue # GPU0, blit
drm_sched_job_done # GPU0, frame rendering
drm_sched_job_run # GPU0, blit
move linear buffer for GPU1 access #
amdgpu_dma_buf_move_notify -> update pt # GPU0
It this point the blit job on GPU0 is still running and would
likely produce a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix zero_vruntime tracking fix
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c72b ("sched/fair: Fix
zero_vruntime tracking").
The combination of yield and that commit was specific enough to
hypothesize the following scenario:
Suppose we have 2 runnable tasks, both doing yield. Then one will be
eligible and one will not be, because the average position must be in
between these two entities.
Therefore, the runnable task will be eligible, and be promoted a full
slice (all the tasks do is yield after all). This causes it to jump over
the other task and now the other task is eligible and current is no
longer. So we schedule.
Since we are runnable, there is no {de,en}queue. All we have is the
__{en,de}queue_entity() from {put_prev,set_next}_task(). But per the
fingered commit, those two no longer move zero_vruntime.
All that moves zero_vruntime are tick and full {de,en}queue.
This means, that if the two tasks playing leapfrog can reach the
critical speed to reach the overflow point inside one tick's worth of
time, we're up a creek.
Additionally, when multiple cgroups are involved, there is no guarantee
the tick will in fact hit every cgroup in a timely manner. Statistically
speaking it will, but that same statistics does not rule out the
possibility of one cgroup not getting a tick for a significant amount of
time -- however unlikely.
Therefore, just like with the yield() case, force an update at the end
of every slice. This ensures the update is never more than a single
slice behind and the whole thing is within 2 lag bounds as per the
comment on entity_key(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't send a 6E related command when not supported
MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the
device doesn't support 6E.
Apparently, the firmware is mistakenly advertising support for this
command even on AX201 which does not support 6E and then the firmware
crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: check if target buffer list is still legacy on recycle
There's a gap between when the buffer was grabbed and when it
potentially gets recycled, where if the list is empty, someone could've
upgraded it to a ring provided type. This can happen if the request
is forced via io-wq. The legacy recycling is missing checking if the
buffer_list still exists, and if it's of the correct type. Add those
checks. |
| Lemmy is a link aggregator and forum for the fediverse. Prior to version 0.19.18, Lemmy allows an authenticated low-privileged user to create a link post through POST /api/v3/post. When a post is created in a public community, the backend asynchronously sends a Webmention to the attacker-controlled link target. The submitted URL is checked for syntax and scheme, but the audited code path does not reject loopback, private, or link-local destinations before the Webmention request is issued. This lets a normal user trigger server-side HTTP requests toward internal services. This issue has been patched in version 0.19.18. |
| Lemmy is a link aggregator and forum for the fediverse. Prior to version 0.19.18, Lemmy fetches metadata for user-supplied post URLs and, under the default StoreLinkPreviews image mode, downloads the preview image through local pict-rs. While the top-level page URL is checked against internal IP ranges, the extracted og:image URL is not subject to the same restriction. As a result, an authenticated low-privileged user can submit an attacker-controlled public page whose Open Graph image points to an internal image endpoint. Lemmy will fetch that internal image server-side and store a local thumbnail that can then be served back to users. This issue has been patched in version 0.19.18. |
