| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: When a partial-chain certificate verification is enabled
together with OCSP response checking for the whole chain, a NULL dereference
will happen if the verified chain does not have a self-signed trusted anchor,
crashing the process.
Impact summary: A NULL pointer dereference can trigger a crash which leads to a
Denial of Service for an application.
When performing OCSP response checking for certificates in the verification
chain, the code always tries to access the next certificate as the issuer.
There is a check for a self-signed certificate. However with the partial
chain verification enabled when the chain does not have a self-signed trusted
anchor, the issuer will be NULL for the last certificate in the chain. A NULL
pointer dereference then happens.
This issue affects only applications which enable both OCSP verification
of the certificate chain (X509_V_FLAG_OCSP_RESP_CHECK_ALL) and partial
chain verification (X509_V_FLAG_PARTIAL_CHAIN) in the certificate
verification. Both flags are disabled by default. For that reason, we have
assigned Low severity to the issue.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: Parsing a crafted DER-encoded ASN.1 structure with a primitive
element whose content exceeds 2 gigabytes in length may cause a heap buffer
over-read on 64-bit Unix and Unix-like platforms.
Impact summary: The heap buffer over-read may crash the application (Denial of
Service) or to load into the decoded ASN.1 object contents of memory beyond the
end of the input buffer. More typically such ASN.1 elements would instead be
truncated.
An integer truncation in OpenSSL's ASN.1 decoder causes the content length of
an ASN.1 primitive element to be mishandled when it exceeds 2 gigabytes. In the
worst case the truncated length is treated as a request to scan the binary
content for a terminating zero byte, possibly causing OpenSSL to read either
less than or beyond the end of the allocated buffer.
Applications that pass attacker-supplied data to d2i_X509(), d2i_PKCS7(), or
any other d2i_* decoding function are affected. OpenSSL's own command-line
tools are not vulnerable, as data read through the BIO layer is checked before
it reaches the affected code. The issue only affects 64-bit Unix and Unix-like
platforms; 32-bit platforms and 64-bit Windows are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue Summary: The PKCS#12 file processing fails to perform sufficient input
validation for files that use Password-Based Message Authentication Code 1
(PBMAC1) integrity mechanism allowing a certificate and private key forgery.
Impact Summary: An attacker impersonating a user can cause a service reading
PKCS#12 files to accept forged certificates and private keys with a 1 in 256
probability.
If a service accepting PKCS#12 files is using passwords for authenticating
the received files, the attacker can create unencrypted PKCS#12 files that
use PBMAC1 authentication that specifies an HMAC key of only one byte, allowing
them to craft a file that will be accepted with a 1 in 256 probability.
That would then cause the service to accept a certificate and private key
controlled by the attacker.
The FIPS modules are not affected by this issue, as the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue Summary: Cryptographic Message Services (CMS) processing fails to perform
sufficient input validation on the cipher and tag length fields of
AuthEnvelopedData containers, leading to various potential compromises.
Impact Summary: Attackers making use of these vulnerabilities may achieve
key-equivalent functionality for a given CMS recipient and/or bypass integrity
validation for a given message.
In one use case, an attacker may send a CMS message containing
AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL
erroneously allows this selection, and attempts to decrypt and validate the
message.
An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData
addressed to the victim can re-emit it with the recipientInfos set left
byte-for-byte intact, so the victim's private key still unwraps the genuine CEK
(the content-encryption key), but with the inner OID rewritten to AES-256-OFB
(Output Feedback Mode, an unauthenticated keystream mode) and with an
attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the
real CEK, never consults the MAC field, and CMS_decrypt() returns success.
If the application under attack responds to the attacker with any indicator
showing success or failure of the decryption effort, it is possible for the
attacker to use this as an oracle to obtain key equivalent functionality for the
CEK used for the chosen recipient of the message.
In another use case, an attacker can reduce the tag length of the chosen AEAD
cipher for a given AuthEnvelopedData container to be a single byte long,
allowing an attacker to brute force CMS decryption, producing an integrity
bypass for applications that trust CMS_decrypt() to reject modified content.
The FIPS modules are not affected by this issue. |
| Issue summary: Remote peer may exhaust heap memory of the QUIC
server or client by flooding it with packets containing PATH_CHALLENGE
frames.
Impact summary: A malicious remote peer can cause an unbounded
memory allocation which can lead to an abnormal termination of the
application acting as a QUIC client or server and a Denial of Service.
A remote peer may exhaust heap memory by flooding the local
QUIC stack with PATH_CHALLENGE frames. The local QUIC stack
allocates a PATH_RESPONSE frame for every PATH_CHALLENGE it receives.
The allocated PATH_RESPONSE frame gets freed only when the remote
peer acknowledges reception of the PATH_RESPONSE frame which will
not be done by a malicious peer.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by
this issue. The QUIC stack is outside of OpenSSL FIPS module
boundary. |
| Issue summary: A malicious server can exploit TLS OCSP stapling by delivering
a crafted response through the status_request extension, triggering a
double-free in the client's certificate verification path.
Impact summary: Successful exploitation allows an attacker to corrupt heap
memory via a double-free, potentially leading to a Denial of Service or
possibly an attacker controlled code execution or other undefined behavior.
If OCSP stapling is enabled and the TLS client connects to a malicious server,
a crafted OCSP stapled response can trigger a double free in the TLS client
when the stapled response is checked.
The OCSP stapling is not enabled by default. Reliable code execution
through a double-free is technically complex and highly environment-dependent
but the Denial of Service impact is straightforward to achieve, warranting
Moderate severity.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Stack overflow vulnerability in Avast Antivirus when scanning a malformed Office Open XML file may allow Denial-of-Service of the antivirus process.
This issue affects Avast Antivirus, AVG Antivirus, Norton Antivirus, Avast One, and Avast Business Antivirus on Windows, macOS, and Linux for virus definition builds before VPS 25020100.
The affected scanning logic is delivered through a shared Gen Digital virus definition update stream. The same stream feeds the consumer antivirus products listed in this advisory and other Gen Digital products that embed the same engine. Mitigation flows through this update channel; installations at or above the listed build are not vulnerable regardless of which product consumes the stream. |
| Heap buffer out-of-bounds read vulnerability in Avira Antivirus engine when scanning a malformed Windows PE file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.98. |
| ]** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-49489. Reason: This candidate is a duplicate of CVE-2026-49489. Notes: All CVE users should reference CVE-2026-49489 instead of this candidate. |
| Heap buffer out-of-bounds read vulnerability in Avira Antivirus engine when scanning a malformed PDF file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.76. |
| Nuxt is an open-source web development framework for Vue.js. In @nuxt/rspack-builder and @nuxt/webpack-builder from versions 3.15.4 to before 3.21.7 and 4.0.0 to before 4.4.7, there is an incomplete fix for GHSA-6m52-m754-pw2g. Source code may still be stolen during dev when using the webpack / rspack builder if the dev server is bound to a non-loopback address (e.g. nuxt dev --host) and the developer opens a malicious site on the same network. This issue has been patched in versions 3.21.7 and 4.4.7. |
| jmespath.php allows users to use JMESPath, software for declaratively specifying how to extract elements from a JSON document, in PHP applications with PHP data structures. Versions prior to 2.9.1 can generate and execute attacker-controlled PHP code when `JmesPath\CompilerRuntime` is used with an attacker-controlled JMESPath expression. The compiler emits parsed JMESPath function names into generated PHP source without sufficient escaping. A crafted expression can cause the generated cache file to contain executable attacker-controlled PHP, which is then loaded by the compiler runtime. The issue is patched in `2.9.1` and later. As a workaround, disable `JP_PHP_COMPILE` and do not use `JmesPath\CompilerRuntime` with attacker-controlled expressions. Use the default `AstRuntime` for untrusted expressions. Applications that must continue accepting untrusted JMESPath expressions before upgrading should ensure those expressions are never evaluated by the compiler runtime. |
| Nuxt is an open-source web development framework for Vue.js. From versions 3.4.3 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6, navigateTo() with external: true generates a server-side HTML redirect body containing a <meta http-equiv="refresh"> tag. The destination URL is only sanitized by replacing " with %22, leaving <, >, &, and ' unencoded. An attacker who can influence the URL passed to navigateTo(url, { external: true }) can break out of the content="…" attribute and inject arbitrary HTML/JavaScript that executes under the application's origin. This issue has been patched in versions 3.21.6 and 4.4.6. |
| Nuxt is an open-source web development framework for Vue.js. In Nuxt versions 3.11.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6 and @nuxt/nitro-server versions 3.20.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6, when experimental.componentIslands is enabled (default in Nuxt 4), any .server.vue file under pages/ is automatically registered as a server island under the key page_<routeName> and exposed via the /__nuxt_island/:name endpoint. Until this fix, requests through that endpoint rendered the page component directly via the SSR renderer without instantiating Vue Router, which meant route middleware declared on the page (including definePageMeta({ middleware })) did not run. This issue has been patched in versions 3.21.6 and 4.4.6. |
| Nuxt is an open-source web development framework for Vue.js. In Nuxt versions 3.1.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6 and @nuxt/nitro-server versions 3.20.0 to before 3.21.6 and 4.0.0-alpha.1 to before 4.4.6, the /__nuxt_island/* endpoint accepts attacker-controlled props query/body parameters and renders any island component without verifying that the URL-resident hash (<Name>_<hashId>.json) was actually issued for those inputs by <NuxtIsland>. The hash is computed and embedded client-side but never validated server-side, so the same path can return materially different responses depending on the query. This issue has been patched in versions 3.21.6 and 4.4.6. |
| Heap buffer out-of-bounds write vulnerability due to integer overflow in Avira Antivirus engine when scanning a malformed MS-DOS executable file may allow Local Execution of Code or Denial-of-Service of the antivirus engine process.
This issue affects Avira Antivirus on Windows, macOS, and Linux for engine builds before 8.3.70.104. |
| Nuxt is an open-source web development framework for Vue.js. In @nuxt/rspack-builder and @nuxt/webpack-builder versions 3.15.4 to before 3.21.6, and 4.0.0-alpha.1 to before 4.4.6, there is an incomplete fix for GHSA-4gf7-ff8x-hq99. Source code may be stolen during dev when using the webpack / rspack builder if the dev server is bound to a non-loopback address (e.g. nuxt dev --host) and the developer opens a malicious site on the same network. This issue has been patched in versions 3.21.6 and 4.4.6. |
| A logic error in OAuthRequestFilter rejects legitimate requests originating from the bound IP address, while blindly allowing requests from any other IP address. Enabling this
security feature inadvertently creates an inverse security check. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue. |
| The JwtAccessTokenValidator class in Apache CXF fails to validate the 'aud' (Audience) claims of incoming JWT access tokens. This allows a JWT issued for one Resource Server to be successfully replayed against a completely different Resource Server, leading to Token Confusion/Routing attacks. Users are recommended to upgrade to versions 4.2.2 or 4.1.7, which fixes this issue. |
| Jenkins 2.483 through 2.567 (both inclusive), LTS 2.492.1 through 2.555.2 (both inclusive) does not escape the user-provided description of a generic offline cause that could be set through the `POST config.xml` API, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure permission. |
