| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return.
Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice.
The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient.
Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected. |
| Sentry-Javascript is an official Sentry SDKs for JavaScript. From 9.36.0 until 9.47.2, 10.75.2, and 11.0.0-rc.1, the webpack integration for @sentry/nextjs skips application middleware for every request path under a configured tunnelRoute, while the tunnel rewrite serves only the exact tunnel path with valid o and p query parameters. When an application route directly collides with the tunnel path or a root dynamic segment resolves under it, an unauthenticated request can reach that route without middleware authorization. Exploitation requires tunnelRoute, a webpack build, a colliding route, and middleware being the only authorization control. This issue is fixed in versions 9.47.2, 10.75.2, and 11.0.0-rc.1. |
| Net::LibSSH versions before 0.004 for Perl authenticate to an unverified server because connect never checks the host key against known_hosts.
connect reports success as soon as ssh_connect returns SSH_OK. libssh leaves the known-hosts check to the application, and this binding never makes it, so the strict_hostkeycheck and knownhosts options are set on the session and then decide nothing.
Password, agent and public-key authentication, channel and SFTP operations all run on a session whose peer was never identified, so an attacker who can redirect the connection receives the password when password authentication is used, and commands and data sent over the session. |
| Robots::Validate versions from 0.4.3 before 0.4.10 for Perl report clients as imposter robots when User-Agent matcher state carries over from a previous request.
Each Robots::Validate object holds one pure-Perl Aho-Corasick search machine and feeds every User-Agent into it without resetting its state. A User-Agent that ends part-way through a robot name leaves the machine mid-match, so the next User-Agent checked by the same object can complete that name. That client's address is then checked against the robot's DNS rule, which it fails.
A remote client can use this to make a site that blocks bad robots block other visitors where the prefix User-Agent string is a suffix of a robot being validated.
Note that deployments with Algorithm::AhoCorasick::XS are also affected, since it was unused due to a different bug. |
| A hardcoded cryptographic key management vulnerability exists in Archer C6 due to the use of a universal cryptographic key shared across devices. An attacker who obtains an encrypted configuration file or other protected credential data can recover plaintext credentials.
Successful exploitation may allow unauthorized disclosure of sensitive information, including administrative credentials. |
| A sensitive information disclosure vulnerability in the cloud-client daemon of Deco BE63 allows authenticated attackers to retrieve the plaintext TP-Link ID account password.
Successful exploitation may allow attackers to compromise the associated cloud account and perform unauthorized actions on behalf of the affected user. |
| Missing Authorization vulnerability in Drupal Webform REST allows Forceful Browsing. This issue affects Webform REST versions: from 0.0.0 to 4.2.1. |
| Privilege Defined With Unsafe Actions vulnerability in Drupal Webform allows Stored XSS. This issue affects Webform versions: from 0.0.0 to 6.2.12, from 6.3.0 to 6.3.1. |
| NT OneAPP developed by NewType Infortech has a Credential Disclosure vulnerability. Unauthenticated remote attackers can trigger an HTTP Basic Authentication challenge from an unvalidated source in the WebView under specific conditions, thereby obtaining the NUP Portal passcode of a logged-in user. |
| NT OneAPP developed by NewType Infortech has an Authentication Bypass vulnerability. Unauthenticated local attackers can bypass the App PIN lock mechanism via a Deep Link, thereby accessing protected resources of a logged-in user. |
| NT OneAPP developed by NewType Infortech has an Exposure of Sensitive Information vulnerability. Unauthenticated local attackers can extract plaintext usernames and passwords from backup data after obtaining ADB backup access authorization and user confirmation of the backup, resulting in sensitive information disclosure. |
| Memory corruption in Loader in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Memory corruption in Loader in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Memory corruption in DevTools in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Memory corruption in DevTools in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Vulnerability in Oracle REST Data Services (component: Core). Supported versions that are affected are 24.2.0-26.1.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle REST Data Services. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle REST Data Services accessible data. CVSS 3.1 Base Score 3.1 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N). |
| Vulnerability in Oracle REST Data Services (component: Core). Supported versions that are affected are 24.2.0-26.1.0. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle REST Data Services. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle REST Data Services accessible data as well as unauthorized read access to a subset of Oracle REST Data Services accessible data. CVSS 3.1 Base Score 3.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:N). |
| Vulnerability in Oracle REST Data Services (component: Core). Supported versions that are affected are 24.2.0-26.1.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle REST Data Services. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle REST Data Services accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| adm-zip before 0.6.1 contains a denial of service vulnerability that allows unauthenticated attackers to crash the Node.js process via a malformed ZIP file, because inflateAsync in methods/inflater.js lacks a zlib stream error listener. Attackers can supply a ZIP with corrupted DEFLATE data processed by readFileAsync, readAsTextAsync, extractAllToAsync, or getDataAsync, triggering an uncatchable exception that terminates all in-flight requests. |
| The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads.
The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate.
When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call. |
