| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incomplete cleanup vulnerability in Apache Tomcat could cause TLS 1.3 connections to fail intermittently.
This issue affects Apache Tomcat: from 11.0.0-M21 through 11.0.26, from 10.1.25 through 10.1.60, from 9.0.90 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| A service account with user-management permissions in one organization can read, modify, disable or delete users belonging to other organizations on the same Grafana instance through the SCIM API (insecure direct object reference). Only Grafana Enterprise instances with SCIM enabled are affected. |
| Missing authorisation checks in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any request to read the full contents of a prefixed _user or _replicator database via an unauthorised API endpoint.
The use of prefixed system databases is very rare.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| Unsafe binary deserialisation in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows an authenticated user to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| A missing circuit-breaker in the replicator in Apache CouchDB 3.5.2 and below on all platforms allows the owner of a replication source or target to cause a denial of service via creating an infinite HTTP redirect loop.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| An unlimited gzip decompression routine in chttpd in Apache CouchDB 3.5.2 and below on all platforms allows any remote client to cause a denial of service via memory exhaustion.
Users are recommended to upgrade to version 3.5.3, which fixes this issue. |
| Incomplete cleanup vulnerability in Apache Tomcat allowed an trailer information from a previous request to leak into a subsequent request.
This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.26, from 10.1.27 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Improper validation of pod identifier uniqueness in aws-network-policy-agent in Amazon EKS Network Policy Agent before v1.4.0 might allow an authenticated remote user to bypass NetworkPolicy enforcement on co-located pods in other namespaces via crafted pod and namespace names that produce pod identifier collisions.
To remediate this issue, users should upgrade to Amazon EKS Network Policy Agent 1.4.0 or later and Amazon VPC CNI Managed Add-on v1.22.4 or later (which includes Network Policy Agent v1.4.0). |
| JQ::Lite versions before 2.51 for Perl execute Perl code embedded in a query's regular expression by compiling it with string eval.
The pattern given to test(), match(), or the match and =~ conditions of select() is placed in a `qr'...'` literal and compiled as source text, so a `(?{ ... })` code block in it runs without `use re 'eval'`. Single quotes in the pattern are escaped, but a code block runs in place and needs none.
An attacker who supplies a query, or text that an application inserts into the pattern of one, can execute arbitrary Perl code in the calling process. |
| The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound.
The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted.
With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination. |
| The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it.
The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server.
The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel.
The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only. |
| Execution After Redirect (EAR) vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue. |
| Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration.
This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Missing Authorization vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
An authorization flaw in the MCP answer retrieval tool allows holders of a global API key to access answer content associated with hidden, deleted, or pending-review questions.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, the builtin creator calls ensure_dir() for executable, library, and package directories, and ensure_dir() accepts an existing symlink to a directory because exists() follows it. Interpreter creation, seed installation, and activation generation then write through the linked parent outside the requested destination when another local account prepared the tree and the invoking user can access the target. The --clear option removes the planted tree first, while ordinary creation reaches it; arbitrary attacker-selected output bytes are not established. This issue is fixed in version 21.14.9. |
| Exposure of SQL Black List to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of unauthorized cross-project job manipulation vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| StreamReadConstraints.maxNameLength (default 50,000 characters) is intended to bound how much memory a single JSON Object property name can consume while being parsed, independently of the much larger maxStringLength (default 100,000,000 characters) that bounds ordinary string values. For parsers built over character input — Reader, String or char[] sources, all served by ReaderBasedJsonParser — that bound is not applied while the name is being accumulated. The code path instead re-uses the string-value length check, which is roughly 2000x larger by default.
In the character-input slow path, ReaderBasedJsonParser._parseName2() accumulates the name into the TextBuffer and, when a segment fills, calls TextBuffer.finishCurrentSegment(), which validates only maxStringLength. The correct check, StreamReadConstraints.validateNameLength(int), is reached afterwards in CharsToNameCanonicalizer.findSymbol(), once the entire name has been scanned to its closing quote. By that point the full name — up to maxStringLength characters — has already been buffered in memory.
A remote attacker who can have a single sufficiently long JSON Object property name parsed through this path can force allocation on the order of 100,000,000 characters (approximately 200 MB, with segment bookkeeping pushing real peak usage higher) before any StreamConstraintsException is thrown, instead of the approximately 50,000-character (about 100 KB) bound the API promises. Repeating this across concurrent requests can exhaust the heap and crash the process. No authentication or user interaction is required. Because StreamReadConstraints.maxDocumentLength is disabled by default (-1), nothing else bounds the token first, so the issue is exploitable under default configuration.
Byte-input parsers are not affected: UTF8StreamJsonParser, UTF8DataInputJsonParser and the non-blocking (async) parsers re-validate maxNameLength on every growth of the name-decode buffer via ParserBase._growNameDecodeBuffer(), rejecting an oversized name after allocating only tens of kilobytes. Applications are exposed when untrusted JSON is parsed from a String, Reader or char[] — for example an HTTP request body already read into a String — rather than from raw UTF-8 bytes.
This issue affects com.fasterxml.jackson.core:jackson-core from 2.16.0 and tools.jackson.core:jackson-core from 3.0.0. Releases before 2.16.0 are not affected, because StreamReadConstraints.maxNameLength was first introduced in jackson-core 2.16.0. |
| Insertion of Sensitive Information into Log File vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
Full API keys are written to application logs on every authenticated request, allowing anyone with log-read access to recover and replay active bearer credentials.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| An integer overflow vulnerability in the license manager service could allow an unauthenticated attacker to crash the service. |
