| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hwdep: Serialize DSP load requests
The check of the loaded DSP indices and the call of the driver's
dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep
file descriptor can be shared among threads, or inherited across fork,
so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
observe the index as unloaded and enter the driver's callback
concurrently, even though the device itself is opened exclusively.
This breaks the assumption behind hw->dsp_loaded that a firmware index
is loaded only once. For example, snd-usb-usx2y hits
WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
allocate the US-428 sequence URBs twice.
Serialize the check, the callback invocation and the bookkeeping with a
per-hwdep mutex, so that the second request returns -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Refuse a retried DSP load after a failure
snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices. If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.
The core keeps the index unloaded when the callback fails, so user
space may issue the same request again. The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).
The URBs cannot be released at this point: the card may already have
registered PCM devices that user space can still open, and the
disconnect handler accesses the URBs without holding the DSP lock.
Mark the chip as hung instead, so that a retried request is refused
with -ENODEV and the assertions keep their meaning. The URBs are
released by snd_usx2y_card_private_free() when the card is freed.
A failing usx2y_async_seq04_init() still releases its own URBs, so that
path remains retryable. |
| Vulnerability in the Oracle AutoVue product of Oracle Supply Chain (component: Security). The supported version that is affected is 21.1.0.7. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle AutoVue executes to compromise Oracle AutoVue. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle AutoVue accessible data. CVSS 3.1 Base Score 3.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Hyperion Financial Close Management executes to compromise Oracle Hyperion Financial Close Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Hyperion Financial Close Management accessible data as well as unauthorized read access to a subset of Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 3.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:N). |
| Out-of-bounds read vulnerability in the pixReadMemJp2kCore() function in Leptonica, located in jp2kio.c. The function retrieves the output dimensions only for component 0 and uses a common index to iterate through the buffers of all components. If the remaining components have smaller dimensions, the traversal exceeds the bounds of their sample buffers, which are allocated by OpenJPEG. When processing a specially crafted JPEG 2000 image, data read from adjacent dynamic memory may be incorporated into the pixels of the decoded image and result in information disclosure to anyone who can access the output. |
| Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Hyperion Financial Close Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Close Management accessible data as well as unauthorized update, insert or delete access to some of Oracle Hyperion Financial Close Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Hyperion Financial Close Management. CVSS 3.1 Base Score 8.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:L). |
| The BuddyPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 14.4.0. This is due to the `get_item_permissions_check` function in the Messages REST API endpoint trusting a client-supplied `user_id` parameter instead of using the authenticated user's ID. This makes it possible for authenticated attackers with Subscriber-level access and above to read, update, or delete other users' private message threads by specifying the victim's user ID in the request. |
| An incorrect implementation of authentication algorithm vulnerability in the SSO API in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks with prior knowledge of the distinguished name (DN). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap()
usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without
checking for NULL. The stream object is released by usb_stream_free(),
which is reached through us122l_stop() both when the device is
disconnected and when us122l_start() fails, and it leaves us122l->sk.s
set to NULL. The hwdep file stays usable after that, so a later mmap()
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182
crashes while reading s->read_size, which sits at offset 0x10.
That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(),
usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and
usb_stream_free() all test it before use. Only the mmap callback misses
the check, so let it return -ENODEV, matching what the other hwdep mapping
in usx2yhwdeppcm.c does when its shared buffer has not been allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Fix NULL dereference at hwdep open and release
usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of
usb_ifnum_to_if() straight to usb_autopm_get_interface() and
usb_autopm_put_interface(), without checking it for NULL.
usb_ifnum_to_if() returns NULL once the device is gone, since
usb_disable_device() clears udev->actconfig on disconnect. The hwdep file
can outlive the disconnect: the card is released with
snd_card_free_when_closed(), so a process that keeps the character device
open reaches the driver's release callback after the USB configuration has
been dropped, and interface_to_usbdev() then dereferences the NULL
interface at offsetof(struct device, parent). The open callback has the
same problem when it races with the disconnect.
Check both lookups and fail the open with -ENODEV; in release, skip the
runtime PM put when the interface is already gone and still run the rest
of the per-file cleanup. Move the us122l->first bookkeeping after the
checks so that a failed open no longer leaves a stale file pointer behind. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Initialize idle URBs before submitting streams
usb_stream_start() submits the first two capture and playback URBs and
only afterwards assigns sk->idle_inurb, sk->idle_outurb,
sk->completed_inurb and sk->completed_outurb to the remaining two URBs
of each direction.
A transfer can complete as soon as usb_submit_urb() has been called, so
the completion handler i_capture_start() or i_playback_start() may run
before those pointers are set. While the stream is still being
synchronized (state below usb_stream_sync1), stream_start() then calls
playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still
NULL, and the packet descriptors are written through that NULL pointer:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000018: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33
Call Trace:
<IRQ>
stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596
i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654
__usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657
usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691
tasklet_hi_action+0xa/0x20 kernel/softirq.c:994
handle_softirqs+0x16f/0x440 kernel/softirq.c:645
</IRQ>
The four URBs referenced by these pointers are allocated long before and
do not depend on any transfer state, so assign them before the submit
loop. Keeping the assignment inside the retry path also restores a
well-defined URB rotation when the start frame mismatch handling kills
and resubmits the streams. |
| Vulnerability in the Oracle Hyperion Planning product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Planning. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Planning accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Planning product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Planning. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Hyperion Planning, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Hyperion Planning accessible data as well as unauthorized read access to a subset of Oracle Hyperion Planning accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N). |
| The Image Source Control Lite – Show Image Credits and Captions plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'meta[isc_image_licence]' parameter in all versions up to, and including, 3.14.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The licence display feature must be enabled in the plugin settings (enable_licences option), which is a standard configuration for sites using the licence-attribution functionality. |
| The Flying Images: Optimize and Lazy Load Images for Faster Page Speed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'post_content' parameter in all versions up to, and including, 2.4.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Although wp_kses_post sanitizes post content on save, the payload is kses-legal at save time; the plugin's output-buffer rewrite transforms it into an executable form at render time by overwriting the valueless data-src attribute with the unescaped src value, meaning save-time sanitization provides no effective mitigation. |
| The BlockArt Blocks – Gutenberg Blocks, Page Builder Blocks ,WordPress Block Plugin, Sections & Template Library plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.4.3. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to view the title, excerpt, and full content of other users' draft, pending, and private posts, exposing that content to unauthenticated visitors on the published permalink. This is exploitable by an Author-level user because WordPress's wp_filter_post_kses preserves block-comment JSON in HTML comments, allowing the malicious queryArgs and query[post_status] attributes to survive post saving and execute on every unauthenticated request to the published URL. Exploitation by attackers with contributor-level access and above requires that attacker only needs to see the data themselves (not expose it to unauthenticated visitors) — satisfied by viewing their own preview URL. On a default installation, where that is not configured, the vulnerability requires attackers with author-level access and above. |
| Zohocorp Manageengine DDI Central build below 6500 are affected by a authenticated PowerShell command injection vulnerability in the Telnet connectivity feature, allowing specially crafted IPv6 scope identifiers to execute arbitrary commands on managed Windows nodes. |
| Vulnerability in the Oracle Hyperion Financial Close Management product of Oracle Hyperion (component: Reconciliation Manage). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle Hyperion Financial Close Management executes to compromise Oracle Hyperion Financial Close Management. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Hyperion Financial Close Management accessible data as well as unauthorized read access to a subset of Oracle Hyperion Financial Close Management accessible data. CVSS 3.1 Base Score 3.0 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:L/A:N). |
| Vulnerability in the Oracle Hyperion Planning product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Planning. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hyperion Planning accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Management accessible data as well as unauthorized read access to a subset of Oracle Hyperion Financial Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Hyperion Financial Management. CVSS 3.1 Base Score 7.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:L). |