| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mrp: fix uninitialised bytes on the wire
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have. |
| In setupLayout of PickActivity.java, there is a possible way to start any activity as a DocumentsUI app due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us144mkii: re-anchor capture URBs on resubmission
capture_urb_complete() resubmits each capture URB without anchoring it:
usb_get_urb(urb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
Anchoring is a property of a submission, not of the URB. The giveback
path calls usb_unanchor_urb() before urb->complete(), so an URB
resubmitted from its own completion handler is off the anchor. The
capture URBs are anchored once, at stream start, so from the first
completion onward tascam->capture_anchor is empty.
tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the
stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor)
to reap the capture URBs before anything is freed. With the anchor empty
those calls return immediately and the URBs stay queued on the host
controller.
tascam_free_urbs() then returns the capture transfer buffers with
usb_free_coherent(), and snd_card_free() releases the snd_card
allocation that embeds tascam (card->private_data). The controller
completes the queued URBs afterwards, writing device-supplied data into
the freed transfer buffer, and capture_urb_complete() dereferences the
freed driver object.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in dummy_timer
Write of size 512 at addr ffff000015b62000
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 64:
usb_alloc_coherent
tascam_alloc_urbs
tascam_probe
Freed by task 170:
usb_free_coherent
tascam_free_urbs
tascam_disconnect
usb_unbind_interface
BUG: KASAN: slab-use-after-free in capture_urb_complete
Read of size 4 at addr ffff0000170ee878
Freed by task 170:
release_card_device
snd_card_free
tascam_disconnect
Restore the usb_anchor_urb() between the reference count bump and the
resubmission. That also makes the handler's usb_unanchor_urb() failure
arm meaningful again and restores usb_kill_anchored_urbs() as a barrier
on the disconnect, suspend and stop-work paths.
The anchoring was removed on the premise that the URB is already anchored
from the initial submission, which does not hold once the first giveback
has run.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: error out for zero quota goal target values
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: free RX pages of consumed but not refilled buffers
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix NULL pointer dereference in module event cache removal
A module-only event filter such as ":mod:foo" is cached with a NULL
event_mod->match when foo has not been loaded. If a later write tries to
remove a specific match from the same module, remove_cache_mod() passes
the NULL cached match to strcmp(), causing a NULL pointer dereference.
The issue can be reproduced from userspace:
echo ':mod:trace_events_kunit_missing' > /sys/kernel/tracing/set_event
echo '!foo_bar:mod:trace_events_kunit_missing' >> /sys/kernel/tracing/set_event
The second write must be a concatenation (">>") to not include O_TRUNC as
that would cause ftrace_clear_events() to clear the cached modules lines.
The crash was reproduced on x86_64 QEMU while KUnit workers contended on
the event tracing path:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:strcmp+0x10/0x30
Call Trace:
__ftrace_set_clr_event_nolock+0x373/0x4a0
ftrace_set_clr_event+0xf0/0x180
ftrace_event_write+0xdf/0x110
vfs_write+0xf6/0x440
ksys_write+0x68/0xe0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Check event_mod->match before comparing it, consistent with the existing
NULL checks for the cached system and event fields. The mismatched removal
continues to return -EINVAL; a broad cached module filter is removed with
"!:mod:<module>". |
| In the Linux kernel, the following vulnerability has been resolved:
fs,fsverity: remove check for fsverity being enabled in setattr_prepare()
The check that fs-verity is available in the kernel is not necessary
here. Filesystems could have fsverity files even without fs-verity
enabled. In that case, truncate on fsverity file will succeed, what this
check is trying to prevent. |
| Joomla Extension - fabrikar.com - Remote code execution in Fabrik < 4.7.2 - An unauthenticated attacker could execute arbitrary code by using the ajax_calc feature of the calc plugin. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process. |
| hashcat's fgetl() function in src/filehandling.c writes a null terminator one byte past the caller's buffer when an input line is exactly the buffer length. Attackers can trigger this out-of-bounds heap write by providing a hash file, potfile, or wordlist containing a line of exactly HCBUFSIZ_LARGE bytes. |
| hashcat fails to restrict command-line options when parsing restore files, allowing attackers to inject output-redirecting options like --outfile and --potfile-path. Attackers can craft restore files with malicious options to append attacker-controlled content to arbitrary files, enabling code execution when targeting shell startup files. |
| NLTK versions before 3.9.4 contain an unbounded recursion vulnerability in JSONTaggedDecoder.decode_obj() that allows attackers to cause denial of service by supplying deeply nested JSON structures. Attackers can craft JSON payloads exceeding the recursion limit to trigger an unhandled RecursionError that crashes the Python process. |
| NLTK before 3.10.0 contains an arbitrary local file read vulnerability in StreamBackedCorpusView that bypasses pathsec.ENFORCE by calling builtins.open() directly instead of pathsec.open(). Attackers who control the fileid argument can read arbitrary local files regardless of the ENFORCE setting, including sensitive system files and application credentials. |
| NLTK before 3.10.0 (affected versions <= 3.9.4) contains a server-side request forgery (SSRF) vulnerability in the validate_network_url() function in nltk/pathsec.py. The _resolve_hostname() helper catches OSError and ValueError during socket.getaddrinfo() and returns an empty list; when DNS resolution fails, the validation loop executes no IP checks and the function fails open, allowing urlopen() to proceed without validation. An attacker who can trigger DNS resolution failures or use DNS rebinding can bypass SSRF protections and reach restricted network resources, including cloud metadata endpoints (e.g., 169.254.169.254). |
| NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled. |
| NLTK versions before 3.10.2 contain a symlink-based sandbox bypass in FramenetCorpusReader that allows attackers to read arbitrary XML files outside the corpus root. Attackers can place symlinks with names containing no path separators inside the corpus subdirectory, which pass the path validation guard and are resolved to files outside the intended corpus root when accessed via frame_by_name(), _lu_file(), or doc() methods. |
| nltk versions before 3.10.2 contain a symlink-based arbitrary file read vulnerability in IPIPANCorpusReader methods that bypass nltk.pathsec validation entirely. Attackers can place a symlink in the corpus root directory and read arbitrary files accessible to the process by calling channels(), domains(), categories(), or fileids() methods with the symlink filename. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
