| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race in unix socket mediation when peer_path is used
The holding a reference to the peer_sk is not enough to ensure access
to the peer sk path. Accessing the path outside of the state lock
allows for a race with unix_release_sock(). Fix this by taking the
state lock and getting a reference to the path under lock.
Ideally for connected sockets we would cache this information so we
don't have to take the lock here. But for now just fix the race. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: qcom: reject stream disable with no active interface
handle_uaudio_stream_req() resolves an interface index with
info_idx_from_ifnum(), which returns -EINVAL when no interface matches.
The enable branch and the response: cleanup label both guard against a
negative index, but the disable branch does not: it forms
info = &uadev[pcm_card_num].info[info_idx] and dereferences it.
uadev[].info is a pointer allocated only when a stream is first enabled,
so a negative info_idx on the disable path is unsafe in two ways:
- If the card was never enabled, .info is NULL and &info[-EINVAL] is a
wild pointer; reading info->data_ep_pipe faults (kernel oops).
- If the card was enabled at least once (.info allocated) and the
disable names an interface that does not match, &info[-EINVAL] points
before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an
out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte
write (both pipe fields are cleared to 0). That is memory corruption,
not just a NULL dereference.
The request is reachable from unprivileged local userspace over
AF_QIPCRTR. Reject a disable request with no resolved interface, matching
the guard the enable path already has. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Fix handling of _PAGE_UNUSED pte bit
The _PAGE_UNUSED softbit should not really be lying around. Its sole
purpose is to signal to try_to_unmap_one() and try_to_migrate_one()
that the page can be discarded instead of being moved / swapped.
KVM has no way to know why a page is being unmapped, so it sets the bit
on userspace ptes corresponding to unused guest pages every time they
get unmapped. KVM has no reasonable way to clear the bit once the page
is in use again.
While set_ptes() checks and clears the bit, other paths that set new
ptes did not. This led to used pages being thrown out as if they were
unused, causing guest corruption.
Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in
set_pte(), i.e. whenever a present pte is getting set. The check in
set_ptes() is then redundant and can be removed.
Also fix gmap_helper_try_set_pte_unused() to only set the bit if the
pte is present; the _PAGE_UNUSED bit is only defined for present ptes
and thus should not be set for non-present ptes. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: validate inner network offset in geneve_gro_complete()
Even with both paths gated on gs->gro_hint, geneve_gro_complete()
re-derives the inner dispatch type and length from the packet and the
current gs->gro_hint, independently of geneve_gro_receive(). The two can
disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/
geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if
the re-read option bytes differ from the ones receive parsed.
geneve_gro_receive() already records the inner network header position in
NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the
offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case
where eth_gro_complete() steps over the inner MAC header, and bail out if
it lands past inner_network_offset.
Use a lower bound rather than exact equality: between gh_len and the inner
L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag
(vlan_gro_receive() advances the recorded offset past it), which only moves
inner_network_offset further out. A valid frame therefore always satisfies
inner_nh <= inner_network_offset, while a gh_len inflated by a hint
gro_receive() did not honour dispatches past the validated inner header,
i.e. the out-of-bounds completion. Only the latter is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix error code in afs_extract_vl_addrs()
The error codes on these paths are only set on the first iteration
through the loop. Set the correct error code on every iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lack of locking around modifications of net->cells_dyn_ino
Fix the lack of locking around modifications of net->cells_dyn_ino by
taking net->cells_lock exclusively. This also requires to cell to be
removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in
afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping
locks cannot be taken there. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writeback error handling
Fix the error handling in writeback_iter() loop. If an error occurs,
writeback_iter() needs to be called again with *error set to the error so
that it can clean up iteration state. Further, the current folio needs
unlocking and redirtying. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
(cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
In the unregister path we use __in_uprobe_trampoline check with
current->mm for the VMA lookup, which is wrong, because we are
in the tracer context, not the traced process.
Add mm_struct pointer argument to __in_uprobe_trampoline and
changing related callers to pass proper mm_struct pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix missing credit release on failure in cifs_issue_read()
Fix missing release of credits in the failure path in cifs_issue_read()
lest retrying the subreq just overwrites the credits value. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in MFT writeback
ntfs_write_mft_block() maps each $MFT record through the $MFT data
runlist. For sub-folio clusters it looks up a struct runlist_element under
ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn
when choosing folio_sz.
That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT
allocation extension can merge a replacement runlist under the same lock,
and ntfs_rl_realloc() can free the old backing array. If that happens
between the lookup and the later folio_sz decision, writeback can
dereference freed runlist storage.
The buggy scenario involves two paths, with each column showing the order
within that path:
MFT writeback path: $MFT allocation extension:
1. Look up rl under 1. Extend the $MFT data allocation.
ni->runlist.lock. 2. Publish a replacement runlist.
2. Drop ni->runlist.lock. 3. Free the old runlist array.
3. Read rl->length and rl->vcn
to choose folio_sz.
Compute the remaining run length while ni->runlist.lock is still held, and
use that scalar after unlock. This preserves the existing folio sizing
decision without carrying a borrowed runlist_element across the lock
boundary.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_mft_writepages+0x1c8d/0x1fb0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_mft_writepages+0x1c8d/0x1fb0
kasan_report+0xe0/0x110
? ntfs_mft_writepages+0x1c8d/0x1fb0
ntfs_mft_writepages+0x1c8d/0x1fb0
? __pfx_ntfs_mft_writepages+0x10/0x10
? __pfx___mutex_unlock_slowpath+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? iput+0x92/0xa80
do_writepages+0x219/0x530
? __pfx_do_writepages+0x10/0x10
__writeback_single_inode+0x117/0xf50
? do_raw_spin_lock+0x130/0x270
? __pfx_do_raw_spin_lock+0x10/0x10
? __pfx___writeback_single_inode+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
writeback_sb_inodes+0x65b/0x1810
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? __pfx_writeback_sb_inodes+0x10/0x10
? lock_release+0x1e0/0x280
? _raw_spin_unlock+0x23/0x40
? move_expired_inodes+0x2b8/0x850
__writeback_inodes_wb+0xf4/0x270
? __pfx___writeback_inodes_wb+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? queue_io+0x2e4/0x410
wb_writeback+0x666/0x880
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_wb_writeback+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? get_nr_dirty_inodes+0x1c/0x170
wb_workfn+0x75e/0xbb0
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x27/0x60
? __pfx_wb_workfn+0x10/0x10
? __pfx_debug_object_deactivate+0x10/0x10
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0x1e0/0x280
process_one_work+0x8d0/0x1870
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x575/0xf80
? __pfx_worker_thread+0x10/0x10
kthread+0x2e7/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x576/0x810
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x57e/0xe10
? __switch_to_asm+0x33/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 970:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3c/0x80
ntfs_runlists_merge+0x1212/0x3010
ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40
ntfs_mft_record_alloc+0x1ab4/0x4f10
__ntfs_create+0x680/0x2e50
ntfs_create+0x1e6/0x3a0
path_openat+0x2b55/0x3c10
do_file_open+0x1f4/0x460
do_sys_openat2+0xde/0x170
__x64_sys_openat+0x122/0x1e0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1294:
kasan_save_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in fallocate
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix malformed ISO_END/CONT handling
Core specification (Part C vol 4 sec 5.4.5) does not exclude empty
ISO_CONT, ISO_END packets. We currently reject them if they are last.
If controller sends malformed sequence
ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START
that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends
too long ISO_END, we panic on skb_put. If controller sends too short
ISO_END we accept it.
Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check
skb->len properly before skb_put. Combine the ISO_CONT/END code paths
as they require the same initial checks. Reject too short ISO_END
packets. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules. |
