| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
Both Intel and AMD consider it to be architecturally valid for XRSTOR to
fail with #PF but nonetheless change the register state. The actual
conditions under which this might occur are unclear [1], but it seems
plausible that this might be triggered if one sibling thread unmaps a page
and invalidates the shared TLB while another sibling thread is executing
XRSTOR on the page in question.
__fpu__restore_sig() can execute XRSTOR while the hardware registers
are preserved on behalf of a different victim task (using the
fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but
modify the registers.
If this happens, then there is a window in which __fpu__restore_sig()
could schedule out and the victim task could schedule back in without
reloading its own FPU registers. This would result in part of the FPU
state that __fpu__restore_sig() was attempting to load leaking into the
victim task's user-visible state.
Invalidate preserved FPU registers on XRSTOR failure to prevent this
situation from corrupting any state.
[1] Frequent readers of the errata lists might imagine "complex
microarchitectural conditions". |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix deadlock in AP/VLAN handling
Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.
To fix this, we need to do two things:
1) prevent changing iftype while AP_VLANs are up, we can't
easily fix this case since cfg80211 already calls us with
the wiphy mutex held, but change_interface() is relatively
rare in drivers anyway, so changing iftype isn't used much
(and userspace has to fall back to down/change/up anyway)
2) pull the dev_close() loop over VLANs out of the wiphy mutex
section in the normal stop case |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst null pointer dereference
This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix vlan tunnel dst refcnt when egressing
The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.
[1] dmesg WARN_ON log and following refcnt errors
WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
Call Trace:
br_handle_vlan+0xbc/0xca [bridge]
__br_forward+0x23/0x164 [bridge]
deliver_clone+0x41/0x48 [bridge]
br_handle_frame_finish+0x36f/0x3aa [bridge]
? skb_dst+0x2e/0x38 [bridge]
? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
br_handle_frame+0x2c3/0x377 [bridge]
? __skb_pull+0x33/0x51
? vlan_do_receive+0x4f/0x36a
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
__netif_receive_skb_core+0x539/0x7c6
? __list_del_entry_valid+0x16e/0x1c2
__netif_receive_skb_list_core+0x6d/0xd6
netif_receive_skb_list_internal+0x1d9/0x1fa
gro_normal_list+0x22/0x3e
dev_gro_receive+0x55b/0x600
? detach_buf_split+0x58/0x140
napi_gro_receive+0x94/0x12e
virtnet_poll+0x15d/0x315 [virtio_net]
__napi_poll+0x2c/0x1c9
net_rx_action+0xe6/0x1fb
__do_softirq+0x115/0x2d8
run_ksoftirqd+0x18/0x20
smpboot_thread_fn+0x183/0x19c
? smpboot_unregister_percpu_thread+0x66/0x66
kthread+0x10a/0x10f
? kthread_mod_delayed_work+0xb6/0xb6
ret_from_fork+0x22/0x30
---[ end trace 49f61b07f775fd2b ]---
dst_release: dst:00000000c02d677a refcnt:-1
dst_release underflow |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: actually fix freelist pointer vs redzoning
It turns out that SLUB redzoning ("slub_debug=Z") checks from
s->object_size rather than from s->inuse (which is normally bumped to
make room for the freelist pointer), so a cache created with an object
size less than 24 would have the freelist pointer written beyond
s->object_size, causing the redzone to be corrupted by the freelist
pointer. This was very visible with "slub_debug=ZF":
BUG test (Tainted: G B ): Right Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........
Redzone (____ptrval____): 40 1d e8 1a aa @....
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
Adjust the offset to stay within s->object_size.
(Note that no caches of in this size range are known to exist in the
kernel currently.) |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix NULL-pointer dereference when hashtab allocation fails
When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.
Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback. If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
...
Call Trace:
kvm_arch_init+0x17c/0x280
kvm_init+0x31/0x330
vmx_init+0xba/0x13a
do_one_initcall+0x41/0x1c0
kernel_init_freeable+0x1f2/0x23b
kernel_init+0x16/0x120
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Update error handler for UCTX and UMEM
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap
drm_gem_ttm_mmap() drops a reference to the gem object on success. If
the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that
drop will free the gem object, and the subsequent drm_gem_object_get()
will be a UAF. Fix by grabbing a reference before calling the mmap
helper.
This issue was forseen when the reference dropping was adding in
commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"):
"For that to work properly the drm_gem_object_get() call in
drm_gem_ttm_mmap() must be moved so it happens before calling
obj->funcs->mmap(), otherwise the gem refcount would go down
to zero." |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: CT, Fix multiple allocations and memleak of mod acts
CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.
Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.
Also the driver never releases the allocated mod hdr actions and
causing a memleak.
Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().
backtrace:
[<000000007316e2f3>] krealloc+0x83/0xd0
[<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
[<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
[<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
[<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
[<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
[<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
[<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
[<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
[<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core] |
| In the Linux kernel, the following vulnerability has been resolved:
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.
This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.
This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: fix memory leak in nci_allocate_device
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev.
Fix this by freeing hci_dev in nci_free_device.
BUG: memory leak
unreferenced object 0xffff888111ea6800 (size 1024):
comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline]
[<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline]
[<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784
[<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline]
[<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132
[<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153
[<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345
[<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
[<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740
[<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846
[<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
[<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914
[<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
[<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109
[<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164
[<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: add missing discipline function
Fix crash with illegal operation exception in dasd_device_tasklet.
Commit b72949328869 ("s390/dasd: Prepare for additional path event handling")
renamed the verify_path function for ECKD but not for FBA and DIAG.
This leads to a panic when the path verification function is called for a
FBA or DIAG device.
Fix by defining a wrapper function for dasd_generic_verify_path(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version
Arturo reported this backtrace:
[709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0
[709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod
[709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common
[709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1
[709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020
[709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0
[709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb
[709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202
[709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001
[709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003
[709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462
[709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960
[709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660
[709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000
[709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0
[709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[709732.359003] PKRU: 55555554
[709732.359005] Call Trace:
[709732.359009] <IRQ>
[709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables]
[709732.359046] ? sched_clock+0x5/0x10
[709732.359054] ? sched_clock_cpu+0xc/0xb0
[709732.359061] ? record_times+0x16/0x80
[709732.359068] ? plist_add+0xc1/0x100
[709732.359073] ? psi_group_change+0x47/0x230
[709732.359079] ? skb_clone+0x4d/0xb0
[709732.359085] ? enqueue_task_rt+0x22b/0x310
[709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en]
[709732.359102] ? packet_rcv+0x40/0x4a0
[709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359133] nft_do_chain+0x350/0x500 [nf_tables]
[709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables]
[709732.359172] ? fib4_rule_action+0x6d/0x80
[709732.359178] ? fib_rules_lookup+0x107/0x250
[709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat]
[709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat]
[709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat]
[709732.359207] nf_hook_slow+0x44/0xc0
[709732.359214] ip_output+0xd2/0x100
[709732.359221] ? __ip_finish_output+0x210/0x210
[709732.359226] ip_forward+0x37d/0x4a0
[709732.359232] ? ip4_key_hashfn+0xb0/0xb0
[709732.359238] ip_subli
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
misc/uss720: fix memory leak in uss720_probe
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
Channel numbering must start at 0 and then not have any holes, or
it is possible to overflow the available storage. Note this bug was
introduced as part of a fix to ensure we didn't rely on the ordering
of child nodes. So we need to support arbitrary ordering but they all
need to be there somewhere.
Note I hit this when using qemu to test the rest of this series.
Arguably this isn't the best fix, but it is probably the most minimal
option for backporting etc.
Alexandru's sign-off is here because he carried this patch in a larger
set that Jonathan then applied. |
