Export limit exceeded: 10439 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18656 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31717 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate owner of durable handle on reconnect Currently, ksmbd does not verify if the user attempting to reconnect to a durable handle is the same user who originally opened the file. This allows any authenticated user to hijack an orphaned durable handle by predicting or brute-forcing the persistent ID. According to MS-SMB2, the server MUST verify that the SecurityContext of the reconnect request matches the SecurityContext associated with the existing open. Add a durable_owner structure to ksmbd_file to store the original opener's UID, GID, and account name. and catpure the owner information when a file handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner() to validate the identity of the requester during SMB2_CREATE (DHnC). | ||||
| CVE-2026-31685 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. | ||||
| CVE-2026-31718 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd(). | ||||
| CVE-2026-31686 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/kasan: fix double free for kasan pXds kasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case of powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just directly pass the start of the pxd table which is passed as the 1st argument. This fixes the below double free kasan issue seen with PMEM: radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages ================================================================== BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20 Free of addr c0000003c38e0000 by task ndctl/2164 CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries Call Trace: dump_stack_lvl+0x88/0xc4 (unreliable) print_report+0x214/0x63c kasan_report_invalid_free+0xe4/0x110 check_slab_allocation+0x100/0x150 kmem_cache_free+0x128/0x6e0 kasan_remove_zero_shadow+0x9c4/0xa20 memunmap_pages+0x2b8/0x5c0 devm_action_release+0x54/0x70 release_nodes+0xc8/0x1a0 devres_release_all+0xe0/0x140 device_unbind_cleanup+0x30/0x120 device_release_driver_internal+0x3e4/0x450 unbind_store+0xfc/0x110 drv_attr_store+0x78/0xb0 sysfs_kf_write+0x114/0x140 kernfs_fop_write_iter+0x264/0x3f0 vfs_write+0x3bc/0x7d0 ksys_write+0xa4/0x190 system_call_exception+0x190/0x480 system_call_vectored_common+0x15c/0x2ec ---- interrupt: 3000 at 0x7fff93b3d3f4 NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000 REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392) MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000 <...> NIP [00007fff93b3d3f4] 0x7fff93b3d3f4 LR [00007fff93b3d3f4] 0x7fff93b3d3f4 ---- interrupt: 3000 The buggy address belongs to the object at c0000003c38e0000 which belongs to the cache pgtable-2^9 of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [c0000003c38e0000, c0000003c38e1000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:c0000003bfd63e01 flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff) page_type: f5(slab) raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected [ 138.953636] [ T2164] Memory state around the buggy address: [ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953669] [ T2164] ^ [ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953692] [ T2164] ================================================================== [ 138.953701] [ T2164] Disabling lock debugging due to kernel taint | ||||
| CVE-2026-31719 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5enc - fix async decrypt skipping hash verification krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher callback, which is the caller's own completion handler. When the skcipher completes asynchronously, this signals "done" to the caller without executing krb5enc_dispatch_decrypt_hash(), completely bypassing the integrity verification (hash check). Compare with the encrypt path which correctly uses krb5enc_encrypt_done as an intermediate callback to chain into the hash computation on async completion. Fix by adding krb5enc_decrypt_done as an intermediate callback that chains into krb5enc_dispatch_decrypt_hash() upon async skcipher completion, matching the encrypt path's callback pattern. Also fix EBUSY/EINPROGRESS handling throughout: remove krb5enc_request_complete() which incorrectly swallowed EINPROGRESS notifications that must be passed up to callers waiting on backlogged requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done for the dispatch_encrypt return value. Unset MAY_BACKLOG on the async completion path so the user won't see back-to-back EINPROGRESS notifications. | ||||
| CVE-2026-31720 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object. | ||||
| CVE-2026-31721 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. | ||||
| CVE-2026-31722 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the borrowed_net flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31691 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igb: remove napi_synchronize() in igb_down() When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9), the XSK buffer pool is destroyed but NAPI polling continues. igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing napi_complete_done() from clearing NAPI_STATE_SCHED. igb_down() calls napi_synchronize() before napi_disable() for each queue vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear, which never happens. igb_down() blocks indefinitely, the TX watchdog fires, and the TX queue remains permanently stalled. napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE. After a full-budget poll, __napi_poll() checks napi_disable_pending(). If set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop that napi_synchronize() cannot. napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible panic caused by Rx traffic arrival while interface is down"). napi_disable() provides stronger guarantees: it prevents further scheduling and waits for any active poll to exit. Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a preceding napi_synchronize() in their down paths. Remove redundant napi_synchronize() call and reorder napi_disable() before igb_set_queue_napi() so the queue-to-NAPI mapping is only cleared after polling has fully stopped. | ||||
| CVE-2026-31704 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use check_add_overflow() to prevent u16 DACL size overflow set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes in u16 variables. When a file has many POSIX ACL entries, the accumulated size can wrap past 65535, causing the pointer arithmetic (char *)pndace + *size to land within already-written ACEs. Subsequent writes then overwrite earlier entries, and pndacl->size gets a truncated value. Use check_add_overflow() at each accumulation point to detect the wrap before it corrupts the buffer, consistent with existing check_mul_overflow() usage elsewhere in smbacl.c. | ||||
| CVE-2026-31706 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl() smb_inherit_dacl() trusts the on-disk num_aces value from the parent directory's DACL xattr and uses it to size a heap allocation: aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...); num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces) without checking that it is consistent with the declared pdacl_size. An authenticated client whose parent directory's security.NTACL is tampered (e.g. via offline xattr corruption or a concurrent path that bypasses parse_dacl()) can present num_aces = 65535 with minimal actual ACE data. This causes a ~8 MB allocation (not kzalloc, so uninitialized) that the subsequent loop only partially populates, and may also overflow the three-way size_t multiply on 32-bit kernels. Additionally, the ACE walk loop uses the weaker offsetof(struct smb_ace, access_req) minimum size check rather than the minimum valid on-wire ACE size, and does not reject ACEs whose declared size is below the minimum. Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path. A legitimate mount.cifs client creates a parent directory over SMB (ksmbd writes a valid security.NTACL xattr), then the NTACL blob on the backing filesystem is rewritten to set num_aces = 0xFFFF while keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s hash check still passes. A subsequent SMB2 CREATE of a child under that parent drives smb2_open() into smb_inherit_dacl() (share has "vfs objects = acl_xattr" set), which fails the page allocator: WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0 Workqueue: ksmbd-io handle_ksmbd_work __alloc_frozen_pages_noprof+0x46c/0x9c0 ___kmalloc_large_node+0x68/0x130 __kmalloc_large_node_noprof+0x24/0x70 __kmalloc_noprof+0x4c9/0x690 smb_inherit_dacl+0x394/0x2430 smb2_open+0x595d/0xabe0 handle_ksmbd_work+0x3d3/0x1140 With the patch applied the added guard rejects the tampered value with -EINVAL before any large allocation runs, smb2_open() falls back to smb2_create_sd_buffer(), and the child is created with a default SD. No warning, no splat. Fix by: 1. Validating num_aces against pdacl_size using the same formula applied in parse_dacl(). 2. Replacing the raw kmalloc(sizeof * num_aces * 2) with kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe allocation. 3. Tightening the per-ACE loop guard to require the minimum valid ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and rejecting under-sized ACEs, matching the hardening in smb_check_perm_dacl() and parse_dacl(). v1 -> v2: - Replace the synthetic test-module splat in the changelog with a real-path UML + KASAN reproduction driven through mount.cifs and SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name in v1 since it does not exist in ksmbd. - Drop the commit-hash citation from the code comment per Namjae's review; keep the parse_dacl() pointer. | ||||
| CVE-2026-31707 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate response sizes in ipc_validate_msg() ipc_validate_msg() computes the expected message size for each response type by adding (or multiplying) attacker-controlled fields from the daemon response to a fixed struct size in unsigned int arithmetic. Three cases can overflow: KSMBD_EVENT_RPC_REQUEST: msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz; KSMBD_EVENT_SHARE_CONFIG_REQUEST: msg_sz = sizeof(struct ksmbd_share_config_response) + resp->payload_sz; KSMBD_EVENT_LOGIN_REQUEST_EXT: msg_sz = sizeof(struct ksmbd_login_response_ext) + resp->ngroups * sizeof(gid_t); resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes signed and size_t, so a negative ngroups is converted to SIZE_MAX before the multiply. A wrapped value of msg_sz that happens to equal entry->msg_sz bypasses the size check on the next line, and downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz, kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the unverified length. Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST paths to detect integer overflow without constraining functional payload size; userspace ksmbd-tools grows NDR responses in 4096-byte chunks for calls like NetShareEnumAll, so a hard transport cap is unworkable on the response side. For LOGIN_REQUEST_EXT, reject resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and report the error from ipc_validate_msg() so it fires at the IPC boundary; with that bound the subsequent multiplication and addition stay well below UINT_MAX. The now-redundant ngroups check and pr_err in ksmbd_alloc_user() are removed. This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix integer overflows on 32 bit systems"), which hardened the request side. | ||||
| CVE-2026-31708 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. | ||||
| CVE-2026-31710 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix dir separator in SMB1 UNIX mounts When calling cifs_mount_get_tcon() with SMB1 UNIX mounts, @cifs_sb->mnt_cifs_flags needs to be read or updated only after calling reset_cifs_unix_caps(), otherwise it might end up with missing CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits. This fixes the wrong dir separator used in paths caused by the missing CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. | ||||
| CVE-2026-31711 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | ||||
| CVE-2026-31712 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible. | ||||
| CVE-2026-31452 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | ||||
| CVE-2026-31692 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtnetlink: add missing netlink_ns_capable() check for peer netns rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer network namespace when creating paired devices (veth, vxcan, netkit). This allows an unprivileged user with a user namespace to create interfaces in arbitrary network namespaces, including init_net. Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer namespace before allowing device creation to proceed. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||
| CVE-2026-31450 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer. | ||||