| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| In the Linux kernel, the following vulnerability has been resolved:
block: stop the timeout timer when releasing a never added disk
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: skip hash tables in u32_bind_class()
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject oversized IBs with per-ring packet limits
On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through
to ib->length_dw without a limit, while ring_emit_ib() encodes length
into packet fields. Oversized values can corrupt adjacent control bits
and destabilize command submission.
Add a per-ring IB packet size limit helper and reject command
submissions exceeding the corresponding dword limit before IB
allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE,
and apply the MM fallback limit for other ring types.
(cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: Fix pointer desynchronization in fb_io_read()
In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to
a faulty user buffer), the loop adjusts the chunk size 'c' and updates
the remaining 'count'. However, the hardware 'src' pointer has already
been eagerly advanced by the original chunk size.
If the loop is allowed to continue, the read will resume from an
incorrect, over-advanced offset. Since the remaining 'count' was only
decremented by the successful bytes, this desynchronization causes the
next iterations to execute more hardware reads than originally bounded,
eventually leading to out-of-bounds I/O reads.
Fix this by breaking out of the loop immediately upon a partial
copy_to_user(). A partial copy indicates a faulty user buffer, making
subsequent read attempts futile. Breaking out ensures we return the
number of successfully read bytes without risking out-of-bounds hardware
accesses in subsequent mismatched iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: reclaim forward-allocated memory on RX path errors
After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"),
errors in the receive path prior to queueing skbs into the receive
queue do not trigger forward-allocated memory reclaiming.
Prevent forward memory from growing unboundedly in pathological drop
scenarios by explicitly reclaiming memory when skbs are dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: reject dev-bound programs bound to a different device
cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).
Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: inherit needed_headroom and needed_tailroom from lowerdev
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve CCA CPRB length and overflow checks
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fastopen: only mark MPTFO subflows with SYN data
Passive TCP Fast Open accepts a valid-cookie SYN even when it carries
no data. In that case the child socket's receive queue is intentionally
left empty.
mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking
for queued SYN data. That made data-less TFO SYNs hit a WARN and, if
the warning was non-fatal, left stale MPTFO state behind. The stale
flag could later trigger a state-confusion bug in
check_fully_established().
Only mark the subflow as MPTFO after confirming that an SKB was queued.
Return quietly when the receive queue is empty.
Note that mptcp_subflow_context's is_mptfo field is now not just about
subflows where the TFO was present, but about MPTFO subflow that
consumed SYN data. Only having a valid cookie but not carrying data is
not really "doing TFO". |
| Editor Arbitrary File Deletion in Fluent Boards Pro <= 2.0.11 versions. |
| Unauthenticated SQL Injection in Visitor Traffic Real Time Statistics Pro <= 11.17 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| Subscriber Sensitive Data Exposure in SureFeedback Client Site <= 1.2.12 versions. |
| Unauthenticated SQL Injection in Epayco <= 8.4.6 versions. |
| A flaw was found in glibc. This vulnerability allows a remote attacker to cause a denial of service (DoS) by providing specially crafted text to an application that converts text from SHIFT_JISX0213 to UCS-4. The crafted input can lead to a continuous loop of processing, preventing the application from making progress and consuming resources. Exploitation requires specific conditions, including the application retrying conversion after an error with limited output space. |
| A Spring WebFlux application that supports WebSocket connections may expose indirectly sensitive user information by including request headers in an exception reason.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.25.RELEASE and earlier |
| A stored cross-site scripting (XSS) vulnerability in Bynder v0.1.394 allows attackers to execute arbitrary web scripts or HTML via a crafted payload. NOTE: this is disputed by the Supplier because v0.1.394 was never a valid version number, and because there is no available information on what v0.1.394 system or environment may have been used for this XSS finding. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can position p
past end, causing all subsequent _safe checks to pass against a
bogus boundary.
3. len = ceph_decode_32(p) has no preceding bounds check, and the
immediately following *p += len is uncapped. A malicious OSD can
send len=0xffffffff, advancing p gigabytes past end and escaping
the decode window entirely.
Fix all three by replacing bare operations with their safe variants:
ceph_decode_copy -> ceph_decode_copy_safe
*p += sizeof(...) -> ceph_decode_skip_n
ceph_decode_32(p) -> ceph_decode_32_safe
*p += len -> ceph_decode_skip_n
A new label is added to return -EINVAL on any bounds violation.
-EINVAL is appropriate here: the data received from the OSD
is structurally malformed, which is an invalid argument to the decode
contract regardless of whether the caller or the wire is at fault.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition)
without any further privileges beyond OSD session establishment.
[ idryomov: use ceph_decode_skip_string() to skip description, trim
changelog ] |
