| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
Patch series "mm/hmm: A fix and a selftest", v3.
Patch 1 fixes a stale warning present from the time when only migration
softleaf entries were supported at the PMD level.
Patch 2 adds some code into hmm-tests.c which exercises the pagemap path
for PMD device-private entries.
This patch (of 2):
pagemap_pmd_range_thp() warns if a non-present PMD is not a migration
entry. This became false once device-private entries at the PMD level
were added.
Therefore, remove the stale migration-only assertion. |
| A vulnerability was detected in Open5GS up to 2.7.6. Affected is the function diam_log_func of the file lib/diameter/common/init.c of the component CER Handler. The manipulation results in reachable assertion. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 2.7.7 is able to address this issue. The patch is identified as c1a803516a3c0485696cb9bcca7a80ad857c7383. It is advisable to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD. |
| baseline-browser-mapping 2.x before 2.11.0 calls process.exit() instead of throwing on invalid or conflicting input parameters, and can trigger immediate process termination, causing denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.0: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 9723a8bed3aa251a26bee4583bac9d8fb064dd44) |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
| A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0. |
| A flaw was found in claircore's RPM package scanner. Crafted RPM header data in a container layer can cause an unchecked type assertion to panic the scanner. The panic is not recovered, causing the Clair indexer process to crash, leading to a denial of service. |
| Improper validation of packet length during tls-crypt-v2 key extraction in OpenVPN 2.6.0 through 2.6.19 and 2.7_alpha1 through 2.7.1 allows authenticated attackers to trigger a fatal assertion and cause a denial of service via a specially crafted packet. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.25.1, the WrappedRE2::Replace function built its replacement result and passed it to V8 using ToLocalChecked without checking for the empty MaybeLocal that V8 returns when the resulting string or buffer exceeds V8's maximum string length. When a global replace uses an output amplifying replacement template, the result can grow quadratically with the input size, and once the result exceeds V8's maximum string length, the unchecked ToLocalChecked call causes a fatal, uncatchable process abort instead of a catchable exception. This issue is fixed in version 1.25.1. |
| A flaw in Node.js allows a spoofed `TypedArray` `byteLength` to trigger a reachable assertion in the synchronous `node:zlib` APIs, causing the entire process to crash. All 11 synchronous zlib functions are affected.
Repeated exploitation of this condition can result in a denial of service.
This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't readahead the relocation inode on RST
On relocation we're doing readahead on the relocation inode, but if the
filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to
preallocated extents not being mapped in the RST) from the lookup.
But readahead doesn't handle the error and submits invalid reads to the
device, causing an assertion in the scatter-gather list code:
BTRFS info (device nvme1n1): balance: start -d -m -s
BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0
BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0
------------[ cut here ]------------
kernel BUG at include/linux/scatterlist.h:115!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567
RIP: 0010:__blk_rq_map_sg+0x339/0x4a0
RSP: 0018:ffffc90001a43820 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802
RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000
RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8
R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000
FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x25
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x65/0x80
? __blk_rq_map_sg+0x339/0x4a0
? exc_invalid_op+0x50/0x70
? __blk_rq_map_sg+0x339/0x4a0
? asm_exc_invalid_op+0x1a/0x20
? __blk_rq_map_sg+0x339/0x4a0
nvme_prep_rq.part.0+0x9d/0x770
nvme_queue_rq+0x7d/0x1e0
__blk_mq_issue_directly+0x2a/0x90
? blk_mq_get_budget_and_tag+0x61/0x90
blk_mq_try_issue_list_directly+0x56/0xf0
blk_mq_flush_plug_list.part.0+0x52b/0x5d0
__blk_flush_plug+0xc6/0x110
blk_finish_plug+0x28/0x40
read_pages+0x160/0x1c0
page_cache_ra_unbounded+0x109/0x180
relocate_file_extent_cluster+0x611/0x6a0
? btrfs_search_slot+0xba4/0xd20
? balance_dirty_pages_ratelimited_flags+0x26/0xb00
relocate_data_extent.constprop.0+0x134/0x160
relocate_block_group+0x3f2/0x500
btrfs_relocate_block_group+0x250/0x430
btrfs_relocate_chunk+0x3f/0x130
btrfs_balance+0x71b/0xef0
? kmalloc_trace_noprof+0x13b/0x280
btrfs_ioctl+0x2c2e/0x3030
? kvfree_call_rcu+0x1e6/0x340
? list_lru_add_obj+0x66/0x80
? mntput_no_expire+0x3a/0x220
__x64_sys_ioctl+0x96/0xc0
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fcc04514f9b
Code: Unable to access opcode bytes at 0x7fcc04514f71.
RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b
RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001
R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5
R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__blk_rq_map_sg+0x339/0x4a0
RSP: 0018:ffffc90001a43820 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802
RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000
RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8
R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000
FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0
Kernel p
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info()
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
sock_map: avoid race between sock_map_close and sk_psock_put
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293
RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000
RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0
RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3
R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840
R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870
FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070
RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore. |
