| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Exposure of Sensitive System Information to an Unauthorized Control Sphere and Initialization of a Resource with an Insecure Default vulnerability in the SNMP component of B&R APROL <4.4-00P5 may allow an unauthenticated adjacent-based attacker to read and alter configuration using SNMP. |
| On the exos 9300 server, a SOAP API is reachable on port 8002. This API does not require any authentication prior to sending requests. Therefore, network access to the exos server allows e.g. the creation of arbitrary access log events as well as querying the 2FA PINs associated with the enrolled chip cards. |
| Initialization of a resource with an insecure default vulnerability exists in JavaTM Platform Ver.12.89 and earlier. If this vulnerability is exploited, the product may be affected by some known TLS1.0 and TLS1.1 vulnerabilities. As for the specific products/models/versions of MFPs and printers that contain JavaTM Platform, see the information provided by the vendor. |
| Insecure initial password configuration issue in SEIKO EPSON Web Config allows a remote unauthenticated attacker to set an arbitrary password and operate the device with an administrative privilege. As for the details of the affected versions, see the information provided by the vendor under [References]. |
| The BigFix SaaS's HTTP responses were missing some security headers. The absence of these headers weakens the application's client-side security posture, making it more vulnerable to common web attacks that these headers are designed to mitigate, such as Cross-Site Scripting (XSS), Clickjacking, and protocol downgrade attacks. |
| The CS5000 Fire Panel is vulnerable due to a default account that exists
on the panel. Even though it is possible to change this by SSHing into
the device, it has remained unchanged on every installed system
observed. This account is not root but holds high-level permissions that
could severely impact the device's operation if exploited. |
| A vulnerability has been identified in IEC 1Ph 7.4kW Child socket (8EM1310-2EH04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Child socket/ shutter (8EM1310-2EN04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m (8EM1310-2EJ04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m incl. SIM (8EM1310-2EJ04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket (8EM1310-2EH04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket incl. SIM (8EM1310-2EH04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter (8EM1310-2EN04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter SIM (8EM1310-2EN04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Child cable 7m (8EM1310-3EJ04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket (8EM1310-3EH04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket/ shutter (8EM1310-3EN04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m (8EM1310-3EJ04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m incl. SIM (8EM1310-3EJ04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket (8EM1310-3EH04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket incl. SIM (8EM1310-3EH04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter (8EM1310-3EN04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter SIM (8EM1310-3EN04-3GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child socket (8EM1310-3FH04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket (8EM1310-3FH04-3GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket incl. SI (8EM1310-3FH04-3GA2) (All versions < V2.135), UL Commercial Cellular 48A NTEP (8EM1310-5HF14-1GA2) (All versions < V2.135), UL Commercial Child 40A w/ 15118 HW (8EM1310-4CF14-0GA0) (All versions < V2.135), UL Commercial Child 48A BA Compliant (8EM1315-5CG14-0GA0) (All versions < V2.135), UL Commercial Child 48A w/ 15118 HW (8EM1310-5CF14-0GA0) (All versions < V2.135), UL Commercial Parent 40A with Simcard (8EM1310-4CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A (USPS) (8EM1317-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A BA Compliant (8EM1315-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A with Simcard BA (8EM1310-5CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1310-5CG14-1GA1) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1314-5CG14-2FA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1315-5HG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A,15118 25ft Sim (8EM1310-5CG14-1GA2) (All versions < V2.135), VersiCharge Blue™ 80A AC Cellular (8EM1315-7BG16-1FH2) (All versions < V2.135). Affected devices contain Modbus service enabled by default. This could allow an attacker connected to the same network to remotely control the EV charger. |
| VMware Aria Operations contains an information disclosure vulnerability. A malicious actor with non-administrative privileges in Aria Operations may exploit this vulnerability to disclose credentials of other users of Aria Operations. |
| Projects using the SUSE Virtualization (Harvester) environment may expose the OS default ssh login password if they are using the 1.5.x or 1.6.x interactive installer to either create a new cluster or add new hosts to an existing cluster. The environment is not affected if the PXE boot mechanism is utilized along with the Harvester configuration setup. |
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could cause an
attacker to execute unauthorized commands when a system’s default password credentials have not been
changed on first use. The default username is not displayed correctly in the WebHMI interface. |
| Initialization of a resource with an insecure default vulnerability in OET-213H-BTS1 sold in Japan by Atsumi Electric Co., Ltd. allows a network-adjacent unauthenticated attacker to configure and control the affected product. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, a server-side request forgery (SSRF) vulnerability exists in Budibase's REST datasource connector. The platform's SSRF protection mechanism (IP blacklist) is rendered completely ineffective because the BLACKLIST_IPS environment variable is not set by default in any of the official deployment configurations. When this variable is empty, the blacklist function unconditionally returns false, allowing all requests through without restriction. This issue has been patched in version 3.33.4. |
| NVIDIA Jetson for JetPack contains a vulnerability in the system initialization logic, where an unprivileged attacker could cause the initialization of a resource with an insecure default. A successful exploit of this vulnerability might lead to information disclosure of encrypted data, data tampering, and partial denial of service across devices sharing the same machine ID. |
| The Go MCP SDK used Go's standard encoding/json. Prior to version 1.4.0, the Model Context Protocol (MCP) Go SDK does not enable DNS rebinding protection by default for HTTP-based servers. When an HTTP-based MCP server is run on localhost without authentication with StreamableHTTPHandler or SSEHandler, a malicious website could exploit DNS rebinding to bypass same-origin policy restrictions and send requests to the local MCP server. This could allow an attacker to invoke tools or access resources exposed by the MCP server on behalf of the user in those limited circumstances. This issue has been patched in version 1.4.0. |
| OpenClaw versions prior to 2026.2.21 contain an improper sandbox configuration vulnerability that allows attackers to execute arbitrary code by exploiting renderer-side vulnerabilities without requiring a sandbox escape. Attackers can leverage the disabled OS-level sandbox protections in the Chromium browser container to achieve code execution on the host system. |
| WWBN AVideo is an open source video platform. In versions 25.0 and below, the official Docker deployment files (docker-compose.yml, env.example) ship with the admin password set to "password", which is automatically used to seed the admin account during installation, meaning any instance deployed without overriding SYSTEM_ADMIN_PASSWORD is immediately vulnerable to trivial administrative takeover. No compensating controls exist: there is no forced password change on first login, no complexity validation, no default-password detection, and the password is hashed with weak MD5. Full admin access enables user data exposure, content manipulation, and potential remote code execution via file uploads and plugin management. The same insecure-default pattern extends to database credentials (avideo/avideo), compounding the risk. Exploitation depends on operators failing to change the default, a condition likely met in quick-start, demo, and automated deployments. This issue has been fixed in version 26.0. |
| FileRise is a self-hosted web file manager / WebDAV server. In versions prior to 3.9.0, a hardcoded default encryption key (default_please_change_this_key) is used for all cryptographic operations — HMAC token generation, AES config encryption, and session tokens — allowing any unauthenticated attacker to forge upload tokens for arbitrary file upload to shared folders, and to decrypt admin configuration secrets including OIDC client secrets and SMTP passwords. FileRise uses a single key (PERSISTENT_TOKENS_KEY) for all crypto operations. The default value default_please_change_this_key is hardcoded in two places and used unless the deployer explicitly overrides the environment variable. This issue is fixed in version 3.9.0. |
| Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2. |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. In 1.11.1 and earlier, On default installations where no password or API key has been configured, all HTTP endpoints and the agent WebSocket lack authentication, and the server's CORS policy accepts any origin. AnythingLLM Desktop binds to 127.0.0.1 (loopback) by default. Modern browsers (Chrome, Edge, Firefox) implement Private Network Access (PNA). This explicitly blocks public websites from making requests to local IP addresses. Exploitation is only viable from within the same local network (LAN) due to browser-level blocking of public-to-private requests. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 3.0.0 to before 3.1.0, if Himmelblau is deployed without a configured tenant domain in himmelblau.conf, authentication is not tenant-scoped. In this mode, Himmelblau can accept authentication attempts for arbitrary Entra ID domains by dynamically registering providers at runtime. This behavior is intended for initial/local bootstrap scenarios, but it can create risk in remote authentication environments. This vulnerability is fixed in 3.1.0. |
