Export limit exceeded: 395334 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395334 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90192 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: handle NULL data in send_data callback mailbox_clear_channel() calls mbox_send_message() with NULL data to notify the remote side that the RX channel has been cleared. qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer, causing a NULL pointer dereference kernel panic when invoked from this path under PREEMPT_RT. Add an explicit NULL check and return early without writing to the TX register, which is the correct behaviour for a channel-clear notification. | ||||
| CVE-2026-90195 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc args. However, the RV64 JIT currently does not perform sign-extension for such kfunc args. Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register liveness analysis"), state pruning could potentially omit zero-extension of 32-bit subregisters, which inadvertently masked the above issue by making the args appear as if they had been properly sign-extended. After that commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4 selftest to fail. Fix this by extending the existing sign-extension logic to handle signed 1-byte and 2-byte kfunc args as well. | ||||
| CVE-2026-90197 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: haptic: don't write an uninitialized value to unhandled usages fill_effect_buf() initializes value only for the four haptic usages handled by its switch, but writes it to field->value[] for every usage. An unhandled usage can therefore receive either an uninitialized value or one left over from the previous usage. hid_output_report() then serializes that value into the effect's report buffer. Skip unhandled usages instead. This also matches switch_mode(), which only updates fields it recognizes. Found with Clang's -Wconditional-uninitialized. | ||||
| CVE-2026-90198 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix use-after-free in snd_card_do_free() A use-after-free was detected in snd_card_do_free() when a sound card managed by devres is unbound while a user-space application still holds an open file descriptor. For managed cards, the memory is allocated using devres_alloc(), and its release function is set to __snd_card_release(), which calls snd_card_free(). When the device is unbound, the unbind thread calls snd_card_free(), which drops a reference to the card's device. If the user thread still has an open file descriptor, the reference count does not reach zero, and the unbind thread blocks on wait_for_completion(&released). When the user thread closes the file descriptor, it drops the final reference, invoking the device release callback release_card_device(), which calls snd_card_do_free(). snd_card_do_free() performs cleanup and calls complete(card->release_completion). This wakes up the unbind thread, which returns from snd_card_free() and __snd_card_release(). The devres core then immediately frees the memory block containing the snd_card structure. Meanwhile, the user thread continues execution in snd_card_do_free() and evaluates `if (!card->managed)`. It reads the `managed` boolean from the snd_card structure that was just freed by the unbind thread, triggering a KASAN use-after-free. Fix this by caching the value of card->managed in a local variable before calling complete(). This ensures that the card pointer is not dereferenced after the unbind thread has been woken up and potentially freed the card. BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604 [inline] BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0 sound/core/init.c:153 Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description+0x55/0x1e0 mm/kasan/report.c:378 print_report+0x58/0x70 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 snd_card_do_free sound/core/init.c:604 [inline] release_card_device+0x1ab/0x1b0 sound/core/init.c:153 device_release+0xc4/0x1f0 drivers/base/core.c:-1 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x222/0x550 lib/kobject.c:737 snd_card_file_remove+0x331/0x390 sound/core/init.c:1125 snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986 __fput+0x418/0xa50 fs/file_table.c:512 fput_close_sync+0x11f/0x240 fs/file_table.c:617 __do_sys_close fs/open.c:1511 [inline] __se_sys_close fs/open.c:1496 [inline] __x64_sys_close+0x7e/0x110 fs/open.c:1496 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> | ||||
| CVE-2026-90204 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the slot-local system inode cache. The dinode validator does not check this active slot, so an out-of-range value produces an invalid cache entry pointer that is dereferenced as an inode pointer. [FIX] Reject an active i_dio_orphaned_slot outside the slot range during dinode validation, before DIO orphan recovery can consume it. | ||||
| CVE-2026-90205 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary. This patch (of 2): [BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access. BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_validate_inode_block() validates i_suballoc_slot but leaves the active ordinary orphan slot unchecked. Downstream consumers assume that the value is smaller than osb->max_slots. [FIX] Reject an active i_orphaned_slot outside the slot range during dinode validation, before the inode reaches orphan wipe processing. | ||||
| CVE-2026-90206 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. | ||||
| CVE-2026-90208 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type Samsung PWM timer might be used as a clock source on some legacy systems. When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a sleeping lock (mutex-based), which must not be used in atomic context such as hard interrupt handlers. Switch the samsung_pwm_lock to the raw_spinlock, which remains a true non-sleeping spinlock even under PREEMPT_RT. | ||||
| CVE-2026-90210 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure When bpf_trampoline_update() fails before modify_fentry_multi()/ unregister_fentry_multi() is called, cur_image is unchanged (cur_image == old_image) and ftrace still calls into it. Freeing old_image in that case causes a UAF. Only free old_image when it differs from cur_image. | ||||
| CVE-2026-90262 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() can find a folio in the mapping that is not uptodate. After taking the folio lock, the current code treats that state as a read error and returns -EIO. That can make a previous transient read failure sticky. If the failed read left a not-uptodate folio in the mapping, later callers find that folio and fail instead of retrying the read. Keep the existing page-cache insertion and locking order, but retry the Merkle item read when a not-uptodate folio is found in the mapping. Also unlock the folio when read_key_bytes() fails so that a later caller can lock it and retry the read. | ||||
| CVE-2026-90263 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if root is readonly while setting security xattr"). Always check if the root is read-only before performing the set acl operation. | ||||
| CVE-2026-12954 | 2 Mapster, Wordpress | 2 Mapster Wp Maps, Wordpress | 2026-09-19 | 8.8 High |
| The Mapster WP Maps plugin for WordPress is vulnerable to Arbitrary User Meta Write in all versions up to, and including, 1.23.0 via the `my_profile_update()` function. This is due to the function performing no nonce verification, no capability check, and no allowlist validation on the meta key supplied via the `acf-photo-gallery-groups` POST parameter before passing both the meta key and its corresponding value directly to `update_user_meta()`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary user meta values, though privilege escalation is not possible. | ||||
| CVE-2026-92970 | 1 Hubzero | 1 Hubzero-cms | 2026-09-19 | 8.8 High |
| HUBzero CMS through 2.2.32 contains a path traversal vulnerability in project file upload handlers that allows authenticated project members to write arbitrary files outside the project repository. Attackers can supply traversal sequences in upload parameters to write files to attacker-chosen paths with web server privileges, potentially enabling code execution. | ||||
| CVE-2026-92944 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 9.8 Critical |
| vm2 versions 3.10.2 through 3.11.6 contain a sandbox escape vulnerability on Node.js 26 where Promise.prototype.finally() bypasses vm2's wrapper protections due to a stale PromiseThenLookupChain protector in V8 14.6. Attackers can exploit this by creating an async function that returns a Promise with an attacker-controlled constructor Symbol.species, allowing them to reach the host Function constructor and process object for arbitrary code execution. | ||||
| CVE-2026-92938 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 9.9 Critical |
| vm2 versions 3.11.3 through 3.11.6 expose Node.js's host node:sqlite module to code running in NodeVM when that builtin is permitted, either explicitly or through builtin: ['*']. The module is wrapped with vm.readonly(), which prevents property assignment but leaves host-authority callables reachable; in addition, the resolver treats any request starting with 'node:' as a core-module request and the runtime strips only one 'node:' prefix, so a sandbox request for 'node:node:sqlite' resolves to the configured node:sqlite entry. Sandboxed code can therefore create an in-memory DatabaseSync with extension loading enabled and call DatabaseSync.loadExtension() on a native library bundled in the untrusted plugin package (path derived from __dirname). SQLite loads the library into the Node.js host process and invokes its native entry point, giving the sandboxed plugin arbitrary native code execution outside the sandbox with the host process's privileges. The issue is fixed in vm2 3.11.7. | ||||
| CVE-2026-92933 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 5.8 Medium |
| vm2 is a sandbox for running untrusted Node.js code. In versions <= 3.11.7, NodeVM exposes the host `util` module to the sandbox as an unfiltered shallow copy (`Object.assign({}, util)` in `defaultBuiltinLoaderUtil`), and the deprecated `sys` builtin (an alias of host `util`) is exposed through the generic builtin loader. On Node.js >= 22.9 this hands sandboxed code `util.getCallSites()`, a programmatic stack-introspection API that returns the host process's full call stack, including absolute file paths, function names, and line numbers for vm2 bridge internals and the embedding application's entrypoint. This bypasses the host-frame redaction introduced for GHSA-v27g-jcqj-v8rw, which only applies to the `Error.prepareStackTrace` formatting channel. The issue is fixed in vm2 3.11.8. | ||||
| CVE-2026-92917 | 1 Getgrav | 1 Grav | 2026-09-19 | 7.5 High |
| Grav is a flat-file CMS. In versions 2.0.0-rc.1 through 2.0.21, the Twig content sandbox fails to restrict the dump and serialize filters (print_r, vardump, json_encode, yaml_encode, string): GravExtension::assertSandboxDumpSafe() determines sandbox state by calling SandboxExtension::isSandboxed() without a Source argument, which reports only the global sandbox flag that Grav never enables, so the guard added in GHSA-mc5q-6hpj-rp7j never executes. As a result, an authenticated user with page-edit rights can render {{ config|print_r }} in page content with Twig processing enabled and dump Grav's entire merged configuration — print_r reflects the real Config object held in a private property of the SandboxConfig facade, bypassing its path redaction — exposing plugin secrets such as SMTP credentials, API tokens, webhook secrets and cache backend passwords. Grav 1.7 is not affected because it ships no Twig content sandbox. The issue is fixed in 2.0.22, where the affected filters are registered with Twig's needs_is_sandboxed flag. | ||||
| CVE-2026-92912 | 1 Wwbn | 1 Avideo | 2026-09-19 | 6.5 Medium |
| AVideo through c3edcc274c389816d434acadac07ee78eaf330c1 uses cryptographically weak uniqid() values for RTMP publish keys in LiveTransmition, reducing key entropy to approximately one million possibilities per creation second. Attackers who know the channel creation time can brute-force the five-digit microsecond component to forge valid stream keys and broadcast content as the channel owner. | ||||
| CVE-2026-92860 | 1 Rcourtman | 1 Pulse | 2026-09-19 | 9.1 Critical |
| A security flaw has been discovered in rcourtman Pulse up to 6.0.4/6.1.0-rc.4. Affected by this issue is the function fmt.Sprintf of the file /api/security/quick-setup of the component Quick Security Setup Handler. The manipulation of the argument Username results in improper input validation. The attack may be performed from remote. Upgrading the affected component is advised. | ||||
| CVE-2026-87796 | 2 Sh1zen, Wordpress | 2 Multi Uploader For Gravity Forms, Wordpress | 2026-09-19 | 9.8 Critical |
| The Multi Uploader for Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.1.9 via the move_file function. This is due to insufficient file type validation during chunked upload handling. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | ||||