| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rustix is a set of safe Rust bindings to POSIX-ish APIs. When using `rustix::fs::Dir` using the `linux_raw` backend, it's possible for the iterator to "get stuck" when an IO error is encountered. Combined with a memory over-allocation issue in `rustix::fs::Dir::read_more`, this can cause quick and unbounded memory explosion (gigabytes in a few seconds if used on a hot path) and eventually lead to an OOM crash of the application. The symptoms were initially discovered in https://github.com/imsnif/bandwhich/issues/284. That post has lots of details of our investigation. Full details can be read on the GHSA-c827-hfw6-qwvm repo advisory. If a program tries to access a directory with its file descriptor after the file has been unlinked (or any other action that leaves the `Dir` iterator in the stuck state), and the implementation does not break after seeing an error, it can cause a memory explosion. As an example, Linux's various virtual file systems (e.g. `/proc`, `/sys`) can contain directories that spontaneously pop in and out of existence. Attempting to iterate over them using `rustix::fs::Dir` directly or indirectly (e.g. with the `procfs` crate) can trigger this fault condition if the implementation decides to continue on errors. An attacker knowledgeable about the implementation details of a vulnerable target can therefore try to trigger this fault condition via any one or a combination of several available APIs. If successful, the application host will quickly run out of memory, after which the application will likely be terminated by an OOM killer, leading to denial of service. This issue has been addressed in release versions 0.35.15, 0.36.16, 0.37.25, and 0.38.19. Users are advised to upgrade. There are no known workarounds for this issue. |
| MANTRA is a purpose-built RWA Layer 1 Blockchain, capable of adherence to real world regulatory requirements. Versions 4.0.1 and below do not enforce the tx gas limit in its send hooks. Send hooks can spend more gas than what remains in tx, combined with recursive calls in the wasm contract, potentially amplifying the gas consumption exponentially. This is fixed in version 4.0.2. |
| Stalwart is a mail and collaboration server. Versions 0.13.3 and below contain an unbounded memory allocation vulnerability in the IMAP protocol parser which allows remote attackers to exhaust server memory, potentially triggering the system's out-of-memory (OOM) killer and causing a denial of service. The CommandParser implementation enforces size limits on its dynamic buffer in most parsing states, but several state handlers omit these validation checks. This issue is fixed in version 0.13.4. A workaround for this issue is to implement rate limiting and connection monitoring at the network level, however this does not provide complete protection. |
| An issue in SunOS Omnios v5.11 allows attackers to cause a Denial of Service (DoS) via repeatedly sending crafted TCP packets. |
| lakeFS is an open-source tool that transforms your object storage into a Git-like repository. In affected versions an authenticated user can crash lakeFS by exhausting server memory. This is an authenticated denial-of-service issue. This problem has been patched in version 1.50.0. Users on versions 1.49.1 and below are affected. Users are advised to upgrade. Users unable to upgrade should either set the environment variable `LAKEFS_BLOCKSTORE_S3_DISABLE_PRE_SIGNED_MULTIPART` to `true` or configure the `disable_pre_signed_multipart` key to true in their config yaml. |
| GNOME VTE before 0.76.3 allows an attacker to cause a denial of service (memory consumption) via a window resize escape sequence, a related issue to CVE-2000-0476. |
| Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory. |
| The etcd package distributed with the Red Hat OpenStack platform has an incomplete fix for CVE-2023-39325/CVE-2023-44487, known as Rapid Reset. This issue occurs because the etcd package in the Red Hat OpenStack platform is using http://golang.org/x/net/http2 instead of the one provided by Red Hat Enterprise Linux versions, meaning it should be updated at compile time instead. |
| CWE-400: Uncontrolled Resource Consumption vulnerability exists that could cause Denial of Service when an
authenticated malicious user sends manipulated HTTPS Content-Length header to the webserver. |
| SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.
|
| ReQuest Serious Play F3 Media Server versions 7.0.3.4968 (Pro), 7.0.2.4954, 6.5.2.4954, 6.4.2.4681, 6.3.2.4203, and 2.0.1.823 contain a remote denial-of-service vulnerability. The device can be shut down or rebooted by an unauthenticated attacker through a single crafted HTTP GET request, allowing remote interruption of service availability. |
| Positive Technologies MaxPatrol 8 and XSpider contain a remote denial-of-service vulnerability in the client communication service on TCP port 2002. The service generates a new session identifier for each incoming connection without adequately limiting concurrent requests. An unauthenticated remote attacker can repeatedly issue HTTPS requests to the service, causing excessive allocation of session identifiers. Under load, session identifier collisions may occur, forcing active client sessions to disconnect and resulting in service disruption. |
| A flaw was found in the cockpit package. This flaw allows an authenticated user to kill any process when enabling the pam_env's user_readenv option, which leads to a denial of service (DoS) attack. |
| ajv (Another JSON Schema Validator) before 8.18.0 is vulnerable to Regular Expression Denial of Service (ReDoS) when the $data option is enabled. The pattern keyword accepts runtime data via JSON Pointer syntax ($data reference), which is passed directly to the JavaScript RegExp() constructor without validation. An attacker can inject a malicious regex pattern (e.g., "^(a|a)*$") combined with crafted input to cause catastrophic backtracking. A 31-character payload causes approximately 44 seconds of CPU blocking, with each additional character doubling execution time. This enables complete denial of service with a single HTTP request against any API using ajv with $data: true for dynamic schema validation. This issue is also fixed in version 6.14.0. |
| Querying for records within a specially crafted zone containing certain malformed DNSKEY records can lead to CPU exhaustion.
This issue affects BIND 9 versions 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1. |
| An issue in Hipcam Cameras RealServer v.1.0 allows a remote attacker to cause a denial of service via a crafted script to the client_port parameter. |
| The etcd package distributed with the Red Hat OpenStack platform has an incomplete fix for CVE-2021-44716. This issue occurs because the etcd package in the Red Hat OpenStack platform is using http://golang.org/x/net/http2 instead of the one provided by Red Hat Enterprise Linux versions, meaning it should be updated at compile time instead. |
| An issue was discovered in Prevx v3.0.5.220 allowing attackers to cause a denial of service via sending IOCTL code 0x22E044 to the pxscan.sys driver. Any processes listed under registry key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\pxscan\Files will be terminated. |
| An issue in OpenStack Storlets yoga-eom allows a remote attacker to execute arbitrary code via the gateway.py component. |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.
|
