| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs2 setacl by argp->mask
The NFSACL v2 SETACL path shares the decoder convention used by its
v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access
only when NFS_ACL is set in the request mask and argp->acl_default
only when NFS_DFACL is set, leaving the other pointer NULL because
the argument buffer is zeroed up to pc_argzero before decode.
nfsacld_proc_setacl() then hands both pointers to set_posix_acl()
unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS
"remove this ACL type" operation, so an omitted arm is
indistinguishable from an explicit request to delete that ACL. A
SETACL carrying only NFS_ACL silently strips the directory's default
ACL; mask=0 strips both.
This is the same defect just fixed in nfsd3_proc_setacl(); apply the
same remedy. Gate each set_posix_acl() call on its mask bit and
initialize error to 0 so that a request with neither bit set leaves
the on-disk ACLs untouched and returns success. The out_drop_lock
path and the unconditional posix_acl_release() in
nfsaclsvc_release_setacl() already tolerate the skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs3 setacl by argp->mask
nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both
ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and
argp->acl_default verbatim. The NFSv3 ACL decoder only populates
those pointers when the corresponding mask bit is set:
nfs3svc_decode_setaclargs()
if (args->mask & NFS_ACL) decode into acl_access
if (args->mask & NFS_DFACL) decode into acl_default
/* otherwise the pointer stays NULL (pc_argzero) */
nfsd3_proc_setacl()
set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access)
set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default)
set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this
ACL type" operation. A NULL pointer that means "the client did not
send this arm" is therefore indistinguishable from "the client
asked to remove this ACL". A SETACL with mask=NFS_ACL silently
drops the directory's default ACL; mask=0 drops both.
The sibling nfsd3_proc_getacl() already consults argp->mask before
touching each arm; mirror that in setacl.
Fix by wrapping each set_posix_acl() call in the matching mask bit
check and initializing error to 0 before inode_lock so that a
request with neither bit set leaves the on-disk ACLs untouched and
returns nfs_ok. The out_drop_lock path and the unconditional
posix_acl_release() at out: are preserved; both NULL-tolerate the
skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops
A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD
carrying an atime or mtime whose nseconds field is out of range. The
value is well-formed on the wire and decodes cleanly into a valid
uint32, but it is not a valid timespec64: tv_nsec must be less than
NSEC_PER_SEC.
Nothing in the setattr path clamps it. notify_change() runs the time
through timestamp_truncate(), which does not reduce tv_nsec below
NSEC_PER_SEC when the filesystem supports nanosecond granularity
(s_time_gran == 1), and the inode atime/mtime setters store it verbatim
(only ctime is normalized, via inode_set_ctime_to_ts()). The
un-normalized value then corrupts on-disk metadata: ext4's
ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which
overflows the 32-bit extra field and clobbers the seconds-epoch bits, so
the stored seconds (and thus the year) are wrong on read-back. XFS with
bigtime mis-stores the timestamp for the same reason.
Validate the client-supplied atime/mtime in the proc handlers and return
NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL
for SETATTR and describes it as the error for a value the server 'can
not store ... in its own representation'; the client maps it to EINVAL.
Checking in the proc handlers, rather than in nfsd_setattr(), keeps the
rejection in front of object creation. The create operations create the
object before nfsd_create_setattr() runs, so a late failure would leave
the new object behind and turn a non-idempotent request into a namespace
change that reports failure. The check is therefore done up front, for
the create operations before the object is created.
tv_nsec is a long, so the comparison casts it to unsigned long (the same
width) rather than to u32, matching timespec64_valid(). A u32 cast would
truncate on 64-bit; the unsigned long cast also rejects a value that
became negative when an out-of-range u32 wire nseconds was assigned to a
32-bit long.
Only client-supplied times are checked: SET_TO_SERVER_TIME requests
carry no client value. The sattrguard3 ctime is deliberately left alone:
an out-of-range guard simply never matches the object's ctime and yields
NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the
protocol-correct outcome rather than rejecting the request. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during delegation revoke
A delegation stateid holds only a bare pointer to its owning
nfs4_client and does not keep it alive. The client survives its
stateids only because __destroy_client() drains cl_delegations and
cl_revoked before free_client() runs.
nfs4_laundromat() breaks that invariant: it unhashes an
expired delegation from cl_delegations, drops deleg_lock, then
revoke_delegation() relinks it onto cl_revoked under cl_lock. In that
window the delegation is on neither list, so client_has_state() can
report no remaining state.
Every teardown path first requires cl_rpc_users to be zero, but
the laundromat holds no such reference. A client whose recalled
delegation has just timed out can therefore reach free_client()
while revoke_delegation() is still about to dereference cl_lock,
a use-after-free.
Pin the client with cl_rpc_users across the revoke so teardown blocks
until it completes, then reap the delegation from cl_revoked. A client
already expiring reaps its own, so skip it and leave the delegation on
del_recall_lru. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in check_new_map() on session freed during unlock
check_new_map() iterates mdsc->sessions[] and for each active session
drops mdsc->mutex to perform per-session operations. The forced-close
path (rank removed from map) correctly takes a reference on s via
ceph_get_mds_session() before releasing mdsc->mutex, but three other
paths do not:
Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex)
Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s)
Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex)
Without the extra reference, another thread can acquire mdsc->mutex
during the unlock window, call __unregister_session() which drops the
last reference on s, and free it. The original thread then accesses
freed memory via s->s_mutex.
Fix by adding ceph_get_mds_session(s) before each mutex_unlock and
ceph_put_mds_session(s) after the corresponding mutex_lock, matching
the pattern already used in the forced-close path.
Race timeline (Path A):
Thread A (check_new_map) Thread B (another map update
holds mdsc->mutex or session teardown)
-------------------------- --------------------------
s = mdsc->sessions[i]
(refcount == 1, held only by
sessions[] array)
mutex_unlock(&mdsc->mutex)
---> acquires mdsc->mutex
__unregister_session(mdsc, s)
sessions[i] = NULL
ceph_put_mds_session(s)
refcount: 1 -> 0
kfree(s) <--- freed!
mutex_lock(&s->s_mutex)
UAF on freed s->s_mutex |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound copied dentry name length in NFS export get_name
ceph_get_name() copies the MDS-supplied name into the caller's
NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len)
and then writes name[rinfo->dname_len] = 0, without checking dname_len
against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply
with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies
rde->name / rde->name_len the same unchecked way.
Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name
buffer in a client's NFS-export get_name path, a slab out-of-bounds write
reported by KASAN. Reachable when a CephFS mount is re-exported over NFS.
Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with
-ENAMETOOLONG before the copy, and use it in both ceph_get_name() and
__get_snap_name(). |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound num_export_targets array for mds info v2/v3
ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from
each per-mds info record and advances the decode cursor by
num_export_targets * sizeof(u32) without first checking that many bytes
remain. The only upper-bound check that catches a runaway cursor
(*p > info_end) is gated on info_v >= 4, because info_end is left NULL
for info_v 2 and 3. When the monitor sends an MDS map whose per-mds
info version is 2 or 3 with an oversized num_export_targets, the cursor
moves past the message front buffer and the later export-targets loop
calls the unchecked ceph_decode_32() on out-of-bounds memory.
A kernel client processes CEPH_MSG_MDS_MAP from its monitor session
(net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to
ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and
calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an
on-path attacker on an unsigned/unencrypted messenger session, can
therefore drive an out-of-bounds read in the client kernel; on x86_64
with KASAN it is reported as a slab-out-of-bounds read in
ceph_mdsmap_decode(). The decoded values land in the internal
info->export_targets[] array, so the consequence is a kernel
out-of-bounds read, not an information leak to the attacker.
Impact: a malicious or compromised Ceph monitor sending an MDS map with
a per-mds info version of 2 or 3 and an oversized num_export_targets
field triggers an out-of-bounds read in the CephFS client kernel.
Add a ceph_decode_need() for the export-targets array before advancing
the cursor, so the bound is enforced for every info_v >= 2, not only
info_v >= 4. This mirrors the count-then-need idiom already used for
m_data_pg_pools later in the same function.
Compute the export-targets byte count with size_mul() and reuse that
checked length when advancing the cursor, so the attacker-controlled
num_export_targets multiplication fails closed on overflow rather than
relying on the later kcalloc() guard. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers
from an MDS create-with-delegation reply. For each set it reads a 64-bit
start and a 64-bit len with ceph_decode_64_safe(), which only validates
that the eight bytes are present in the message, not the value, and then
loops over len while inserting entries into s_delegated_inos.
len is fully attacker controlled. A malicious or compromised MDS can send
one huge interval, many intervals in one reply, duplicate intervals, or
repeated replies that accumulate delegated inodes on the same session.
The original code bounded none of these and could spin the insert loop or
grow the xarray without limit.
Bound both dimensions with a single enforcement point. Track the number
of delegated inodes held by each MDS session in an atomic counter and
grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless()
to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper
is the only place the counter grows, the per-session population can never
exceed the cap, so no separate per-session pre-check is needed. The
counter is decremented when async create consumes a delegated inode or
when an insert fails, incremented when a delegated inode is restored,
initialized with the session xarray, and reset when reconnect destroys
the xarray.
A per-session cap alone still lets one reply spin the insert loop on
duplicate ranges without growing the counter, so also cap the aggregate
interval length accepted from a single reply. Together these bound both
the loop trip count per reply and the xarray population across replies.
The cap is a fixed, client-chosen constant rather than a value derived
from the MDS. mds_client_prealloc_inos is a userspace MDS configuration
option; it is never sent to the kernel client on the wire, and a
server-supplied bound could not be trusted for a defensive limit in any
case. The constant is set well above that option's documented default of
1000 (a generous multiple), so legitimate refill behavior is unaffected
while the CPU and xarray memory a malformed delegation stream can consume
stays bounded.
Impact: a malicious or compromised Ceph MDS can no longer make a client
spin through an unbounded delegated-inode interval or grow one session's
delegated-inode xarray without limit. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: drop recovered reloc root refs on recovery failure
During relocation recovery, each fs root gets a reference to its relocation
root. If loading or adding a later root fails, or if the first transaction
commit fails, btrfs_recover_relocation() jumps to out_unset before
merge_reloc_roots() and clean_dirty_subvols().
put_reloc_control() drops the list-owned relocation root references, but it
does not clear fs_root->reloc_root or drop the references owned by those
pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an
error such as -ENOMEM while processing a later root can leave references
behind.
Keep temporary references to the fs roots associated during recovery. On
failure, clear their reloc_root pointers and drop the corresponding
references. Once the first transaction commit succeeds, drop only the
temporary fs root references and let the normal merge and cleanup paths
handle the relocation roots.
Fault injection on a pending-relocation image confirmed the cleanup gap.
With an injected first-commit failure, 25 fs roots had reloc_root set with
fs_error=0. With this fix, the same failure path drops that count to 0
before mount fails. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix extent map leak in NOCOW direct I/O write
btrfs_dio_iomap_begin() calls btrfs_get_extent(), which returns an
extent map reference that must be dropped on all exit paths.
For direct writes into a NOCOW range, btrfs_get_blocks_direct_write()
keeps using that extent map and asks btrfs_create_dio_extent() to
allocate the ordered extent. If that fails, for example because
btrfs_alloc_ordered_extent() fails, the function returns the error
without dropping the input extent map. The PREALLOC path avoided this by
dropping the input extent map before replacing it with the newly created
one.
Check the error from btrfs_create_dio_extent() before replacing the
map and drop the input extent map on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: call pagecache_isize_extended() in cifs_setsize() when extending
cifs_setsize() calls truncate_pagecache() but skips
pagecache_isize_extended() on extension. truncate_setsize() shows
the correct pattern:
i_size_write(inode, newsize);
if (newsize > oldsize)
pagecache_isize_extended(inode, oldsize, newsize);
truncate_pagecache(inode, newsize);
pagecache_isize_extended() zeroes the tail of the page straddling old
EOF. Without it, dirty bytes in that region can be written back to
the server, exposing stale data in the newly extended range. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0
With len == 0 (clone to EOF), the effective length is computed as:
len = src_inode->i_size - off;
If off > i_size, this is a negative loff_t, corrupting the ByteCount
in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range
in filemap_write_and_wait_range(). The existing off >= i_size check
fires only after the ioctl has already been sent.
Snapshot i_size_read() once for both the bounds check and the length
calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject
off > src_size with -EINVAL. Treat off == src_size as a no-op,
consistent with __generic_remap_file_range_prep(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
When a file has the setuid or setgid bit set and is written to, the VFS
strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID
together with an ATTR_MODE carrying the already-cleared mode.
Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped
ATTR_MODE in that case:
/* skip mode change if it's just for clearing setuid/setgid */
if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
attrs->ia_valid &= ~ATTR_MODE;
This is fine for the default mount, where the mode is only emulated via
the DOS read-only attribute and cannot represent the setuid/setgid bits
anyway. However, with the "cifsacl" or "modefromsid" mount options the
mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with
the SMB3.1.1 POSIX extensions the mode is sent to the server directly,
and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent
via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means
the cleared mode is never pushed to the server, so the setuid/setgid bit
survives the write.
This is a security issue: on local filesystems the setuid bit is stripped
when a file is written, but over these cifs.ko mounts the bit persists on
the server, potentially allowing an unexpected privilege escalation on
subsequent execution.
Fix this in two places:
1. cifs_setattr_nounix(): only take the "skip mode change" shortcut
when the mode is emulated via the DOS read-only attribute (i.e.
neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are
in effect), so that the cleared mode is propagated to the server
in the ACL / POSIX cases.
2. cifs_setattr_unix(): this function is only called when Unix
extensions are in effect, so the mode is always stored on the
server. Remove the shortcut entirely so that the cleared mode is
always pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2()
coalesce_t2() computes data pointers directly from server-supplied
DataOffset fields with no validation against buffer bounds:
data_area_of_tgt = (char *)&pSMBt->hdr.Protocol +
get_unaligned_le16(&pSMBt->t2_rsp.DataOffset);
data_area_of_src = (char *)&pSMBs->hdr.Protocol +
get_unaligned_le16(&pSMBs->t2_rsp.DataOffset);
data_area_of_tgt += total_in_tgt;
...
memcpy(data_area_of_tgt, data_area_of_src, total_in_src);
A small DataOffset can push a pointer below the actual byte area,
overwriting header fields; a large one can push it past the buffer
end, causing out-of-bounds heap reads (source) or writes (target).
The BCC overflow guard does not prevent this: BCC reflects how much
data is present, while DataOffset controls where in the buffer it
starts.
The "validate target area" comment present since the function was
first written in 2005 was a placeholder that was never implemented.
Add lower- and upper-bound checks for both data pointers before the
memcpy, and before any target header fields are modified. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject a tree connect response whose byte count is too small
CIFSTCon() bounds its strnlen() over the byte area with the server's
ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int
and converts to a huge size_t. The later subtraction wraps the __u16
bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of
up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the
slab object, and the bytes reach userspace through tcon->nativeFileSystem
in /proc/fs/cifs/DebugData.
Reject a byte area too small for what the parser consumes. Two bytes is
the least it can consume, and no conformant response carries fewer. The
new trace point is the 129th smb_eio_trace entry, which __mode(byte)
cannot represent, so the attribute goes with it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard
in the raw_event handler can reject any report arriving after the
transfer has ended. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
