| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel sched scan results work on unregister
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: publish QP after initialization
siw_create_qp() currently calls siw_qp_add() before the queues, CQ
pointers, state, completion, and device list entry are ready. A QPN
lookup can therefore reach a QP that is still being constructed.
Move siw_qp_add() to the end of siw_create_qp(), after QP
initialization and before adding the QP to the siw device list. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, shutdown_client_connection() in src/server/ns_turn_server.c prematurely calls dec_quota() and releases bandwidth accounting during the first-stage close of a mobility-enabled allocation while preserving the allocation, relay socket, session, and mobility ticket, allowing an authenticated client to bypass --user-quota and --total-quota and exhaust relay ports. This issue is fixed in version 4.17.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: check access to copy_file_range source with src mounter creds
Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done. |
| An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project restrictions during instance migration. When migrating an instance to a target project, LXD accepts configuration overrides without validating the new configuration against the target project's enforced restrictions. An attacker can exploit this flaw to move instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. |
| The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization.
During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence.
An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor.
The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs. |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 could allow a local attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF
pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path:
l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv()
-> ppp_input(&po->chan)
It runs under rcu_read_lock() holding only an l2tp_session reference and
takes NO reference on the internal PPP channel (struct channel,
chan->ppp) that ppp_input() dereferences.
The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel
are RCU-safe. But the internal struct channel is a separate allocation
that ppp_release_channel() frees with a plain kfree():
close(data socket) -> pppol2tp_release() -> pppox_unbind_sock()
-> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch)
For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit
(no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips
both ppp_disconnect_channel()'s synchronize_net() and
ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace
period. rcu_read_lock() in pppol2tp_recv() does not protect against a
plain kfree(), so an in-flight ppp_input() on one CPU can dereference
the channel just freed by close() on another CPU.
The bug is reachable by an unprivileged user.
Defer the channel free to an RCU callback via call_rcu() so the grace
period fences any in-flight ppp_input(). The disconnect and unbridge
teardown paths already fence with synchronize_net()/synchronize_rcu();
call_rcu() does the same here without stalling the close() path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit()
Sashiko (locally) reports multiple out-of-bound issues in
ffa_setup_and_transmit:
1) Writing ep_mem_access->reserved can write out of bounds for FFA
versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case
while reserved has an offset of 24.
Instead of zeroing fields, memset the struct to zero first based on
the FFA version.
2) Make sure there is enough size to write constituents.
While at it, convert the only sizeof() in the driver that uses a
type instead of variable. |
| Django REST framework is a powerful and flexible toolkit for building Web APIs. Prior to 3.17.2, Django REST Framework's rest_framework/renderers.py AdminRenderer.render() uses override_method() to simulate GET and directly invokes view.get() without view.check_permissions() while rendering an invalid write request, allowing a 400 Bad Request HTML response to disclose data from a GET representation that the requester is not permitted to access. This issue is fixed in version 3.17.2. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0. |
| The Eventin WordPress plugin before 4.1.20 does not perform an authorization check on its waiting-list registration handler, allowing unauthenticated users to create WordPress user accounts for arbitrary email addresses and inject order records. |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.12, RustFS get_condition_values folds attacker-controlled request headers from HeaderMap into server-derived userid, username, principaltype, groups, versionid, signatureversion, jwt:, and ldap: condition keys, allowing authenticated callers to satisfy identity-based policy conditions. This issue is fixed in version 1.0.0-beta.12. |
| A maliciously crafted DXF file, when parsed through Autodesk AutoCAD, can force a Heap-Based Overflow vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| Budibase is an open-source low-code platform. Prior to 3.40.0, the MySQL integration component in Budibase is configured with multipleStatements: true, enabling execution of multiple SQL statements in a single query. Attackers can inject malicious SQL commands through user input fields, leading to complete database compromise. This vulnerability is fixed in 3.40.0. |
| XSS vulnerability in code display in Apache Allura.
This issue affects Apache Allura: before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| Apache Airflow's Task SDK did not mask the contents of a Variable whose JSON value is a list, so secrets stored in that shape appeared in cleartext in task logs and in the Rendered Templates UI. Masking was applied only when the deserialized value was a string or a dict; a list at the top level matched neither and was returned unmasked. Any authenticated user able to read the logs or rendered templates of a task that references such a Variable could recover the values, with no special configuration required. This is the list-shaped counterpart of CVE-2026-59244, whose fix covered the dict case only, so deployments that upgraded in response to that advisory remain affected and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
