Search

Search Results (430029 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-131216 1 Splunk 1 Enterprise Security 2026-11-20 5.7 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the manage_all_investigations capability could store attacker-controlled script content in a legacy investigation workbench panel title. Another authenticated user could later open a legacy investigation workbench that renders the panel. The script could then run in the browser of the user who opened the workbench and expose data or actions available through Splunk Web to the user who opened the workbench. The vulnerability is possible because Splunk Enterprise Security does not escape legacy investigation workbench panel titles before rendering them in Splunk Web. For more information see Capability reference for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/capability-reference-for-splunk-enterprise-security) and Review and finish existing legacy investigations in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.4/investigations/review-and-finish-existing-legacy-investigations-in-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131217 1 Splunk 1 Enterprise Security 2026-11-20 4.6 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in data that populates the System Misconfigurations report. Another user with access to the report could later select a related row. The System Misconfigurations report could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selected the row. The commands could access or modify data available to the user who selected the row. The vulnerability is possible because the System Misconfigurations report does not treat values from the Vulnerabilities data model as literal search values when it builds drilldown searches. For more information see System Misconfigurations (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-reports/system-misconfigurations) and Configure users and roles (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-the-app/configure-users-and-roles) in the Splunk documentation.
CVE-2026-131218 1 Splunk 1 Enterprise Security 2026-11-20 8.3 High
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the mc_investigation_read capability could inject arbitrary Search Processing Language (SPL) into Mission Control dashboard search requests. Mission Control could then run the injected SPL with elevated permissions. With this access, the user could cause Mission Control to read stored credentials and write data to indexes and lookups. The vulnerability is possible because Mission Control does not validate reserved search filters before adding them to dashboard searches. For more information see Overview of Mission Control in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.1/mission-control/overview-of-mission-control-in-splunk-enterprise-security) and Capability reference for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.2/installation/capability-reference-for-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131220 1 Splunk 1 Enterprise Security 2026-11-20 5.9 Medium
In Splunk Enterprise Security versions below 8.7.0, a user who can influence event values that populate an affected data model based on the Common Information Model could cause attacker-controlled values to appear in an affected Dashboard Studio view. Another authenticated user could later click a corresponding row in that view. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who clicked the row. The commands could access or modify some data available to the user who clicked the row. The vulnerability is possible because affected Dashboard Studio drilldowns do not safely quote data model values before including them in searches. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/users-and-roles-for-splunk-enterprise-security) and Create a dashboard in Dashboard Studio (https://help.splunk.com/en/splunk-enterprise/create-dashboards-and-reports/dashboard-studio/10.2/create-a-dashboard-in-dashboard-studio/create-a-dashboard-in-dashboard-studio) in the Splunk documentation.
CVE-2026-131221 1 Splunk 1 Enterprise Security 2026-11-20 4.6 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in intrusion detection data. Another user who holds the "pci_user" role could later select the corresponding row in the Intrusion Detection and Prevention System Alert Activity Details panel. The report could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selected the row. The commands could access data and perform actions available to the user who selected the row. The vulnerability is possible because the Intrusion Detection and Prevention System Alert Activity report does not treat intrusion detection values as literal search values when it builds the details drilldown search. For more information see Reports (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/user-manual/8.7/using-the-splunk-app-for-pci-compliance/reports) and Configure users and roles (https://help.splunk.com/en/splunk-enterprise-security-8/splunk-app-for-pci-compliance/installation-and-configuration-manual/8.7/configure-the-app/configure-users-and-roles) in the Splunk documentation.
CVE-2026-131222 1 Splunk 1 Enterprise Security 2026-11-20 6.5 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the edit_modinput_identity_manager capability could use Asset and Identity Management to modify protected saved searches and role capabilities. With this access, the user could obtain full administrator access to the Splunk platform. The vulnerability is possible because Asset and Identity Management does not validate the app namespace before sending a Representational State Transfer (REST) API request with a system authentication token. For more information see Capability reference for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/capability-reference-for-splunk-enterprise-security) and Add asset and identity data to Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/asset-and-identity-management/add-asset-and-identity-data-to-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131223 1 Splunk 1 Enterprise Security 2026-11-20 5.9 Medium
In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user could trick an authenticated user into opening a link that the unauthenticated user creates. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the authenticated user. The commands could access data and perform actions available to that user. The vulnerability is possible because the Lookup Editor does not validate lookup identifiers from URL parameters before adding them to searches. The vulnerability requires the attacker to phish the user by tricking them into opening a link that the attacker creates. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see Create and manage lookups in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.0/managing-security-content/create-and-manage-lookups-in-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131225 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in the Malware data model. Another authenticated user with access to the Malware Search dashboard could later select a table row containing those values. Splunk Enterprise Security could then run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selected the row. The commands could expose data available to the user who selected the row and add attacker-controlled records to an index. The vulnerability is possible because the Malware Search dashboard does not safely quote row values before adding them to drilldown searches. For more information see Endpoint dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.4/analytics/endpoint-dashboards) and Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/users-and-roles-for-splunk-enterprise-security) in the Splunk documentation.
CVE-2026-131226 1 Splunk 1 Enterprise Security 2026-11-20 6.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in Intrusion Detection data. If another user who can access the Intrusion Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify data available to the user who selects the row. The vulnerability is possible because the Intrusion Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Network dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/network-dashboards) in the Splunk documentation.
CVE-2026-131227 1 Splunk 1 Enterprise Security 2026-11-20 6.3 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in Network Resolution data. If another user who can access the Domain Name System Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Domain Name System Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Protocol intelligence dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/protocol-intelligence-dashboards) in the Splunk documentation.
CVE-2026-99635 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.0 Medium
In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: size receive SKBs from declared payload vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The guest controls the descriptor length and hdr->len independently. A guest can therefore provide a 64 KiB descriptor while declaring a zero payload. The descriptor-sized skb remains queued, rx_bytes and buf_used remain unchanged, and only the fixed queue-entry budget limits retention. This is not a lifetime leak: the skb is freed when dequeued or at socket teardown. Repeating this across connections can nevertheless exhaust host memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for a 262,144-byte receive buffer; a full-payload control retained 265,984 bytes. Vhost previously read hdr->len and allocated pkt->buf from that value. The conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs from the descriptor length, introducing the allocation-accounting mismatch. Copy the header into a stack object and validate hdr->len before allocating the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor capacity no longer determines queued memory. Check payload_len against len - sizeof(hdr) to avoid addition overflow on 32-bit hosts.
CVE-2026-99638 1 Linux 2 Linux, Linux Kernel 2026-11-20 N/A
In the Linux kernel, the following vulnerability has been resolved: net/sched: clamp skb->queue_mapping before indexing the tx queue This issue was caught by Sashiko (nipa). A producer-side path cap is already merged (ea4d4b5dddb5); this patch adds the matching consumer-side caps. The issue: The tx queue is picked and capped in netdev_core_pick_tx() before the __dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that store is never re-checked. bpf_convert_ctx_access() bounds it only by NO_QUEUE_MAPPING, not by the device's queue count. Two consumers read the stale value: - On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the allocation on non-lltx devices such as ifb. Drivers that index their rings from skb_get_queue_mapping() (ex: ifb) go out of range the same way. - On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value; the array is sized dev->num_tx_queues. A duplicating netem on a child qdisc clones the skb and re-enqueues the clone at the taprio root (qdisc_root_bh()) through a direct rootq->enqueue() call, so the value reaches taprio_enqueue() before any dequeue cap runs. The Fix: Cap the mapping at the consumers and write the capped value back, so the qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver read stay in range. On the dequeue side the cap folds into the dequeue path instead of a separate walk over the returned list: dequeue_skb() caps the head, and each bulk helper caps the element it appends. For a qdisc that is not TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and selects queue 0. A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses q->dev_queue for the frozen check, the BQL limit and the trace point, while qdisc_restart() transmits on the skb's queue. Capping an out-of-range mapping to queue 0 would therefore send a per-queue child's skb through a different queue than the one it was dequeued for. On mq, mqprio, taprio and htb offload children, a stopped queue 0 could then park the list in q->gso_skb, and the later wake would schedule queue 0's own child instead of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to keep the documented invariant. The pin covers every mapping, not only an out-of-range one: an in-range mapping that a filter sets on one of those per-queue children is rewritten to the child's own queue, and this path does not call netdev_cap_txqueue(), so it logs no notice. On a single-queue device qdisc_create() sets TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this branch and is corrected without a notice. That also keeps a bulk list on one queue by construction: every element of a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is pinned to q->dev_queue before it is appended. The fast bulk helper therefore needs no head comparison and no skb_bad_txq requeue; the slow helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a mismatched follower, where a wake on any queue reschedules q. On the enqueue side taprio_enqueue() caps the mapping against real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so a duplicating child cannot steer the clone out of the array. Conditions to recreate the bug: The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores __sk_buff->queue_mapping (a tc BPF action is enough), attach it to a transmit qdisc (for example a matchall filter on a prio root), and send a packet. With a 1-queue device a store of 1 indexes one past dev->_tx[]. Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG: KASAN: slab-out- ---truncated---
CVE-2026-131785 2026-11-20 5.3 Medium
Missing Authorization vulnerability in PublishPress PublishPress Permissions press-permit-core allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PublishPress Permissions: from n/a through 5.0.1.
CVE-2026-95690 1 Openssl 1 Openssl 2026-11-20 5.3 Medium
Issue summary: Receiving crafted out-of-sequence DTLS handshake fragments may cause OpenSSL to allocate a full message-length reassembly buffer for each buffered message, so a small amount of wire data consumes a large amount of memory. Impact summary: A remote attacker can send a few small crafted DTLS handshake fragments to make a DTLS server or client allocate well over a megabyte of memory per connection, which may lead to memory exhaustion and Denial of Service if many connections are made. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: DTLS handshake messages can arrive out of order and fragmented, so OpenSSL buffers fragments of up to ten out-of-sequence messages until reassembly is possible. When the first fragment of a new message arrives, OpenSSL allocates a buffer sized to the full message length declared in the fragment header, plus a reassembly bitmap, instead of storing only the bytes actually received. The declared length is capped by the maximum certificate list size, 128KB by default, and that cap applies to every handshake message type rather than only to Certificate messages. Only DTLS endpoints reach this code. TLS, QUIC and applications that do not use DTLS are unaffected. An attacker sends fragments that declare a large message length but carry almost no data, using up to ten distinct message sequence numbers. A single connection can then hold roughly 1.4MB of buffers from about 156 bytes on the wire. Because the number of buffered messages is capped, memory exhaustion requires many connections or many peers, which is why the severity is Low. FIPS impact: no The affected code is outside the FIPS module boundary.
CVE-2026-84786 1 Openssl 1 Openssl 2026-11-20 7.5 High
Issue summary: A DANE-enabled TLS client may crash by dereferencing a NULL pointer when processing an unusual combination of certificate and TLSA records. Impact summary: The impact is limited to a client crash (potential Denial of Service). CWE: CWE-476: NULL Pointer Dereference Description: A DANE-enabled TLS client that supports TLSA records with at least one of the PKIX-TA(0) or PKIX-EE(1) usages alongside the DANE-TA(2) usage may crash by dereferencing a NULL pointer if the server claims a trusted CA's certificate to be its end-entity certificate and has an unusual mix of associated TLSA records. DANE SMTP clients should not be affected since only the DANE-TA(2) and DANE-EE(3) TLSA record usages are specified applicable in SMTP. For example, the Postfix MTA is not affected, while the Exim MTA does not at present use OpenSSL's DANE implementation. Use of DANE in validation of RFC7250 raw public keys (RPKs) is also unaffected, as these only use DANE-EE(3) TLSA records. Only applications that support combining the DANE PKI with a traditional PKI are potentially affected. A DANE-enabled browser or similar, that uses OpenSSL's DANE API could be affected. FIPS impact: no The DANE API is outside the FIPS module boundary.
CVE-2026-131781 2026-11-20 6.5 Medium
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force Spectra ultimate-addons-for-gutenberg allows Stored XSS.This issue affects Spectra: from n/a through 2.20.6.
CVE-2026-131228 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user who holds the "ess_user" Splunk Enterprise Security role could run a search that causes attacker-controlled Search Processing Language (SPL) text to appear in the Search Audit dashboard. If another user who can access the dashboard selects the affected search, Splunk Enterprise Security could run attacker-controlled SPL commands using the permissions of the user who selects the search. The user who runs the first search could then access sensitive data and modify some data available to the user who selects the affected search. The vulnerability is possible because the Search Audit dashboard does not safely escape logged search text before inserting it into drilldown searches. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.7/installation/users-and-roles-for-splunk-enterprise-security) and Audit dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/audit-dashboards) in the Splunk documentation.
CVE-2026-131229 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in vulnerability data. If another user who can access the Vulnerability Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Vulnerability Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Network dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/network-dashboards) in the Splunk documentation.
CVE-2026-131230 1 Splunk 1 Enterprise Security 2026-11-20 5 Medium
In Splunk Enterprise Security versions below 8.7.0, an unauthenticated user could trick a user that holds a role with the ueba_can_view_ui capability into opening a link that the unauthenticated user creates for the User and Entity Behavior Analytics (UEBA) Overview dashboard. When the user opens the link, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who opens the link. The commands could expose or modify some data available to the user who opens the link and partially disrupt search processing. The vulnerability is possible because the User and Entity Behavior Analytics Overview dashboard does not escape dashboard filter values from the link before substituting the values into SPL searches. The vulnerability requires the attacker to phish the user by tricking them into opening a link that the attacker creates. The unauthenticated user should not be able to exploit the vulnerability at will. For more information see UEBA dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.8/analytics/ueba-dashboards) in the Splunk documentation.
CVE-2026-131231 1 Splunk 1 Enterprise Security 2026-11-20 5.4 Medium
In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in managed-lookup audit data. If another user who can access the Managed Lookups Audit dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Managed Lookups Audit dashboard does not safely escape audit data before inserting it into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Audit dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/audit-dashboards) in the Splunk documentation.