| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish
On arm64 server, we find that a task trying to grab the anon_vma lock
triggers hungtask.
INFO: task main:2354726 blocked for more than 120 seconds.
Tainted: G E 5.10.0-0021.aarch64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01
Call trace:
__switch_to+0x7c/0xbc
__schedule+0x3b4/0x8a0
schedule+0x50/0xe0
rwsem_down_write_slowpath+0x3cc/0x6cc
down_write+0x60/0x260
__anon_vma_prepare+0x6c/0x210
do_anonymous_page+0x258/0x660
handle_pte_fault+0x188/0x214
__handle_mm_fault+0x1b0/0x380
handle_mm_fault+0xf4/0x284
do_page_fault+0x19c/0x494
do_translation_fault+0xcc/0xf8
do_mem_abort+0x48/0xac
el0_da+0x44/0x80
el0_sync_handler+0x88/0xb4
el0_sync+0x160/0x180
After analyzing the vmcore, we found the anon_vma->root->rwsem.count is
-1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the
anon_vma->root->rwsem.owner shows the lock is held, but the stack of the
task shows the task doesn't hold the anon_vma lock.
After adding more debugging info, we found __anon_vma_prepare() reuses
anon_vma and triggers the UAF of anon_vma->root due to missing memory
barrier, leading to locking and unlocking two different anon_vma->root,
thus leading to an anon_vma will never be unlocked, and another anon_vma
couldn't be locked anymore.
This race requires two adjacent VMAs that are not merged but are
anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be
changed by mprotect()). Two threads fault on each VMA concurrently, both
calling __anon_vma_prepare() with only mmap_lock held for reading.
THREAD A THREAD B
__anon_vma_prepare __anon_vma_prepare
find_mergeable_anon_vma() -> NULL
anon_vma = anon_vma_alloc();
anon_vma->root = anon_vma;
// the two stores may be reordered
vma->anon_vma = anon_vma;
// finds A's anon_vma
anon_vma = find_mergeable_anon_vma(vma);
anon_vma_lock_write(anon_vma);
// may still see the old root
down_write(&anon_vma->root->rwsem);
anon_vma_unlock_write(anon_vma);
// see the new root, never unlock old
up_write(&anon_vma->root->rwsem);
thread A triggers page fault and calls __anon_vma_prepare() to prepare
anon_vma for the faulting vma. __anon_vma_prepare() allocates and
initializes a new anon_vma, and then publishes it to the vma with a plain
store. anon_vma_prepare() only requires the mmap_lock to be held for
reading, so two threads can fault on adjacent VMAs at the same time.
While thread A publishes a new anon_vma, thread B could find the anon_vma
via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem.
The store to anon_vma->root in anon_vma_alloc() and the store to
vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock()
only provide acquire semantics, which do not prevent prior stores from
being reordered after them. The release semantics of the corresponding
spin_unlock() and anon_vma_unlock_write() come too late, the store to
vma->anon_vma is already published before they take effect. As a result,
thread B can observe the following order:
vma->anon_vma = anon_vma;
anon_vma->root = anon_vma;
The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma
may reuse memory from a previously freed one. The constructor
(anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma()
doesn't clear it either, so the old root value persists until
anon_vma_alloc() overwrites it. If that store isn't v
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing, the hw will see the page table entry is
cleared, trigger page fault and wait until it is handled. The page fault
handling will wait for damon_hugetlb_mkold() due to the page table lock.
Because hugetlbfs is an in-memory file system and hugetlb pages cannot be
reclaimed, no critical issue is expected to my best knowledge. But
definitely this is a nasty bug that should be fixed sooner rather than
later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip expired catchall elements on insert and delete
nft_setelem_catchall_insert() looks up duplicates with
nft_set_elem_active() only, while nft_set_catchall_lookup() and the
dump path additionally skip expired elements.
Once a catchall element with a timeout expires, this predicate drift
makes it invisible to userspace dumps, yet it still blocks
re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and
without it the request reports success but silently inserts nothing.
The stale entry only goes away when the (user-tunable) gc interval
elapses, so the catchall rule may silently stop matching for an
arbitrarily long time after its first expiration.
The delete path shows the same drift: nft_setelem_catchall_deactivate()
picks the first active-next entry in the catchall list, so with an
expired entry still pending GC it retires the stale entry instead of
the fresh one, and it deactivates an element that userspace no longer
sees instead of failing with -ENOENT.
Align both walks with the lookup and dump predicates: only an element
that is active and not expired counts as a duplicate or delete
candidate, using the per-netns timestamp taken at transaction start,
in line with the set backend .insert/.deactivate and catchall GC sync
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function already dereferences a few lines up to find pmu.
armv8pmu_sched_task() is the only in-tree implementation that
dereferences the argument, and it only reads ->pmu, so the oops needs
BRBE, added in v6.17. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
the attribute access completes. Acquire the mutex killably so that the
device ioctl remains interruptible while waiting for KVM_RUN to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close handle after create-context parsing failure
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do not set FMODE_CREATED unless a regular file was opened. For
O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's
-EFTYPE check.
Defer closing a legacy POSIX handle on a non-regular inode until
after inode lookup. This avoids closing it again if lookup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close completed creates on compound wait errors
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transfer them only after synchronization of
the processed responses, so the release path can inspect successful
CREATE responses and queue SMB2_close() after a later failure. Account for
a remote open only after the close work is allocated and before it is
queued, since the caller has not yet updated num_remote_opens. Mark the
create+close compound used by smb2_unlink() so it is not closed again.
Non-CREATE responses and compounds that already include a close keep their
existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix cursor and pointer handling when recovering iunlink buckets
LOLLM pointed out a bug in xlog_recover_iunlink_bucket:
1. We don't null out prev_ip after releasing it, which can lead to UAF
problems if the inodegc flush call in the loop fails.
at which point I noticed even more bugs:
2. If the inodegc flush inside the loop fails, we also leak @ip.
3. We set prev_agino to agino having already advanced agino, which
results in inodes with i_prev_unlinked set to itself.
4. If we exit the bottom of the loop with prev_ip set, then prev_ip
aliases ip and we also set its i_prev_unlinked to itself.
Bugs 3 and 4 introduce loops into the unlinked list, though these loops
don't surface because we immediately flush each unlinked inode after
loading it.
Fix all of these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up processing both again but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels or run NAT and adds the
new extension for that breaking the pointer in the expectation
list causing UAF on the destruction path later.
While this is possible to trigger, there should be no practical
network pipeline where we need to process both clones without
modifications in the same zone. So, let's just reset the entry in
case for some reason we got an skb with a shared one. This doesn't
affect any known use cases, but avoids any potential problems with
sharing and modification of the unconfirmed ct entry.
Unlike openvswitch module, act_ct allows for NAT without commit.
Changing that would be a uAPI break. So, act_ct needs to reset on NAT
regardless of the commit flag to avoid reallocation of the extension
space. This, however, doesn't really change the picture for sensible
networking cases as there should be no need to run the same packet
twice (before and after the clone) through conntrack without packet
header or zone changes and without commit.
The fixes tag points to the introduction of helpers, since that's the
main UAF trigger for the sharing. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot for QLAFX00, matching the I/O
accessors used elsewhere on this ring. Other adapters keep the plain
memset() on their DMA-coherent rings. The zero-fill is retained for FX00
because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of
the entry and rely on the unused tail being pre-zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: require the MAC header to be present in __vlan_insert_inner_tag()
__vlan_insert_inner_tag() only guarantees head room via skb_cow_head(),
never that mac_len bytes of MAC header are present. Its ETH_HLEN
wrappers - __vlan_insert_tag() under skb_vlan_push(), and
vlan_insert_tag() under validate_xmit_vlan() on the generic transmit
path - therefore rewrite the first 16 bytes at skb->data: a 12-byte
memmove plus two 2-byte stores at +12 and +14. No caller supplies the
bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull().
An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a
one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a
hwaccel tag; the next - clsact "action vlan push" or
bpf_skb_vlan_push() - enters the helper with skb->len still 1. The
head comes from skbuff_small_head without __GFP_ZERO, so each push
drags bytes from beyond skb->tail into the frame. After three the
one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised
slab:
0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81
`------------------------------'
only 0x5a was sent; the rest is slab, here the top 56 bits of a
linear-map address
Require the MAC header the helper rewrites to be present, so such a
frame is dropped rather than transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: drop RX packets with a short Ethernet header
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: preserve mremap address delta when skipping page tables
move_hugetlb_page_tables() optimizes mremap() by advancing to the last
entry in the page table when the source page table does not exist, either
initially or after unsharing a PMD table. The common loop increment then
steps to the first entry in the next page table.
However, the code advances both the source and destination addresses to
the last entries in their respective page tables, which is wrong. The
destination address must be advanced only by the same amount as the source
address.
If the source and destination offsets within their page tables differ, the
destination address can be advanced too far, causing follow-up issues.
Fix this by advancing the destination address by the source advance
distance.
With a reproducer, we were able to trigger a kernel panic on x86-64. With
this fix in place, we can no longer reproduce the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
Locked QP and CQ lookups from EQ interrupts can deadlock with
create-path XArray updates. If an interrupt arrives while the create
path holds the plain xa_lock, the lookup spins forever trying to
acquire the same lock.
Use IRQ-safe XArray helpers for all QP and CQ create-path updates,
including the GSI QP store and error paths. Initialize both arrays with
XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state. |
