| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix. |
| In the Linux kernel, the following vulnerability has been resolved:
neigh: let neigh_xmit take skb ownership
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: fix strparser anchor skb leak on offload RX setup failure
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix possible infinite loop and oob read in symlink_data()
On 32-bit architectures, the infinite loop is as follows:
len = p->ErrorDataLength == 0xfffffff8
u8 *next = p->ErrorContextData + len
next == p
On 32-bit architectures, the out-of-bounds read is as follows:
len = p->ErrorDataLength == 0xfffffff0
u8 *next = p->ErrorContextData + len
next == (u8 *)p - 8 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in osdmap_decode()
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential null-ptr-deref in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in crush_decode()
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove
In qrtr_port_remove(), the socket reference count is decremented via
__sock_put() before the port is removed from the qrtr_ports XArray and
before the RCU grace period elapses.
This breaks the fundamental RCU update paradigm. It exposes a race
window where a concurrent RCU reader (such as qrtr_reset_ports() or
qrtr_port_lookup()) can obtain a pointer to the socket from the XArray,
and attempt to call sock_hold() on a socket whose reference count has
already dropped to zero.
This exact race condition was hit during syzkaller fuzzing, leading to
the following refcount saturation warning and a potential Use-After-Free:
refcount_t: saturated; leaking memory.
WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0
Modules linked in: qrtr(+) bochs drm_shmem_helper ...
Call Trace:
<TASK>
qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr]
__qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr]
qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr]
kernel_bind+0xe4/0x120 net/socket.c:3592
qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr]
qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr]
do_one_initcall+0xf5/0x5e0 init/main.c:1283
...
</TASK>
Fix this by deferring the reference count decrement until after the
xa_erase() and the synchronize_rcu() complete.
(Note: The v1 of this patch incorrectly replaced __sock_put() with
sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()
still hold a reference to the socket, so freeing the socket memory here
would lead to a subsequent UAF in the caller. Thus, the __sock_put() is
kept, but only repositioned to close the RCU race.) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: validate MAC header was set before dumping it
The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.
This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).
Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.
BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265) |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: do not reuse an in-progress partial send
espintcp keeps a single in-flight transmit in ctx->partial.
Before building a new sk_msg, espintcp_sendmsg() first tries to flush
that state through espintcp_push_msgs().
For blocking callers, espintcp_push_msgs() may return success even when
the previous partial send is still pending. espintcp_sendmsg() would
then reinitialize emsg->skmsg and reuse ctx->partial while the old
transfer still owns that state.
Do not rebuild the send message when ctx->partial is still in progress.
If espintcp_push_msgs() returns with emsg->len still set, fail the new
send instead of overwriting the live partial state.
This is a memory-safety fix: reusing the live partial-send state can
leave a stale offset attached to a new sk_msg and lead to an out-of-
bounds read in the send path.
tcp_sendmsg_locked() already handles waiting for send buffer memory, so
the fix here is just to preserve espintcp's one-message-at-a-time
transmit state. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tvlv: reject oversized TVLV packets
batadv_tvlv_container_ogm_append() builds a TVLV packet section from
the tvlv.container_list. The total size of this section is computed by
batadv_tvlv_container_list_size(), which sums the sizes of all registered
containers.
The return type and accumulator in batadv_tvlv_container_list_size() were
u16. If the accumulated size exceeds U16_MAX, the value wraps around,
causing the subsequent allocation in batadv_tvlv_container_ogm_append()
to be undersized. The memcpy-style copy that follows would then write
beyond the end of the allocated buffer, corrupting kernel memory.
Fix this by widening the return type of batadv_tvlv_container_list_size()
to size_t. In batadv_tvlv_container_ogm_append(), check the computed length
against U16_MAX before proceeding, and bail out as if the allocation had
failed when the limit is exceeded. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix signed comparison in io_poll_get_ownership()
io_poll_get_ownership() uses a signed comparison to check whether
poll_refs has reached the threshold for the slowpath:
if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS))
atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG
(BIT(31)) is set in poll_refs, the value becomes negative in
signed arithmetic, so the >= 128 comparison always evaluates to
false and the slowpath is never taken.
Fix this by casting the atomic_read() result to unsigned int
before the comparison, so that the cancel flag is treated as a
large positive value and correctly triggers the slowpath. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: avoid use of uninit sender vars
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_policy: fix strict mode inbound policy matching
match_policy_in() walks sec_path entries from the last transform to the
first one, but strict policy matching needs to consume info->pol[] in
the same forward order as the rule layout.
Derive the strict-match policy position from the number of transforms
already consumed so that multi-element inbound rules are matched
consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix tp_meter counter underflow during shutdown
batadv_tp_sender_shutdown() unconditionally decrements the "sending"
atomic counter. If multiple paths (e.g. timeout, user cancel, and
normal finish) call this function, the counter can underflow to -1.
Since the sender logic treats any non-zero value as "still sending",
a negative value causes the sender kthread to loop indefinitely.
This leads to a use-after-free when the interface is removed while
the zombie thread is still active.
Fix this by using atomic_xchg() to ensure the counter only transitions
from 1 to 0 once.
[sven: added missing change in batadv_tp_send] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket. |
