| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
commit 6d3789d347a7 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"),
changed the create handle to FD_PREPARE(), but it caused kernel
null-ptr-deref because after call to retain_and_null_ptr(src_info),
src_info is re-used for adding it to the global list.
Getting the following kernel panic in papr_hvpipe_dev_create_handle()
when trying to add src_info to the list.
Kernel attempted to write user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x00000000
Faulting instruction address: 0xc0000000001b44a0
Oops: Kernel access of bad area, sig: 11 [#1]
...
Call Trace:
papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable)
sys_ioctl+0x528/0x1064
system_call_exception+0x128/0x360
system_call_vectored_common+0x15c/0x2ec
Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto
cleanup is getting too convoluted. This is mainly because we need to
ensure only 1 user get the srcID handle. To simplify this, we allocate
prepare the src_info in the beginning and add it to the global list
under a spinlock after checking that no duplicates exist.
This simplify the error handling where if the FD_ADD fails, we can
simply remove the src_info from the list and consume any pending msg in
hvpipe to be cleared, after src_info became visible in the global list. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset
and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set'
rule run at the same time.
Previous patches made it safe to run individual reset handlers concurrently
so commit_mutex is no longer required to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix VF illegal register access
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp
Users can set damos_quota_goal->nid with arbitrary value for
node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA()
without a validation of the value. This can result in out of bounds
memory access. The issue can actually triggered using DAMON user-space
tool (damo), like below.
$ sudo mkdir /sys/fs/cgroup/foo
$ sudo ./damo start --damos_action stat --damos_quota_interval 1s \
--damos_quota_goal node_memcg_used_bp 50% -1 /foo
$ sudo dmseg
[...]
[ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00
Fix this issue by adding the validation of the given node id. If an
invalid node id is given, it returns 0% for used memory ratio, and 100%
for free memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix memory leaks on probe failures
Make sure to deregister the controller, disable pins, and kill and free
the RX URB on probe failures to mirror disconnect and avoid memory
leaks and use-after-free.
Also add an explicit URB kill on disconnect for symmetry (even if that
is not strictly required as USB core would have stopped it in the
current setup). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/stat: fix memory leak on damon_start() failure in damon_stat_start()
Destroy the DAMON context and reset the global pointer when damon_start()
fails. Otherwise, the context allocated by damon_stat_build_ctx() is
leaked, and the stale damon_stat_context pointer will be overwritten on
the next enable attempt, making the old allocation permanently
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in arena_vm_close on fork
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25980: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
Cover a missed execution path with a new check. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12
svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB.
However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and
clearing clean bits in vmcb12 is not architecturally defined.
Move vmcb_mark_dirty() to callers and drop it for vmcb12.
This also facilitates incoming refactoring that does not pass the entire
VMCB to svm_copy_lbrs(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
