| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io()
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function bsf_sess_find_by_ipv6prefix of the file /src/bsf/context.c of the component BSF. This manipulation of the argument ipv6Prefix causes denial of service. It is possible to initiate the attack remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
In rxrpc_preparse(), there are two paths for parsing key payloads: the
XDR path (for large payloads) and the non-XDR path (for payloads <= 28
bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly
validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR
path fails to do so.
This allows an unprivileged user to provide a very large ticket length.
When this key is later read via rxrpc_read(), the total
token size (toksize) calculation results in a value that exceeds
AFSTOKEN_LENGTH_MAX, triggering a WARN_ON().
[ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc]
Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse()
to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX,
bringing it into parity with the XDR parsing logic. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix dir separator in SMB1 UNIX mounts
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. |
| A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue. |
| A vulnerability was identified in itsourcecode Electronic Judging System 1.0. This affects an unknown part of the file /intrams/login.php. Such manipulation of the argument Username leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used. |
| A security vulnerability has been detected in Totolink NR1800X 9.1.0u.6279_B20210910. The impacted element is the function find_host_ip of the component lighttpd. Such manipulation of the argument Host leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in Open5GS up to 2.7.7. This issue affects the function amf_namf_callback_handle_sdm_data_change_notify of the file /namf-callback/v1/{id}/sdmsubscription-notify of the component AMF SBI Endpoint. This manipulation of the argument changeItem.newValue causes denial of service. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in nextlevelbuilder GoClaw and GoClaw Lite up to 3.8.5. This affects an unknown function of the component RPC Handler. This manipulation causes improper authorization. The attack may be initiated remotely. The exploit has been published and may be used. Upgrading to version 3.9.0 mitigates this issue. Patch name: 406022e79f4a18b3070a446712080571eff11e30. You should upgrade the affected component. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is an authentication bypass vulnerability in Traefik's ForwardAuth middleware when trustForwardHeader=false is configured and Traefik is deployed behind a trusted upstream proxy. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2. |
| NSauditor 3.1.2.0 contains a buffer overflow vulnerability in the SNMP Auditor Community field that allows local attackers to crash the application by supplying an excessively long string. Attackers can paste a large payload into the Community field and trigger the Walk function to cause a denial of service condition. |
| Nsauditor 3.2.3 contains a denial of service vulnerability in the registration code input field that allows attackers to crash the application. Attackers can paste a large buffer of 256 repeated characters into the 'Key' field to trigger an application crash. |
| A flaw was found in rust-rpm-sequoia. An attacker can exploit this vulnerability by providing a specially crafted Red Hat Package Manager (RPM) file. During the RPM signature verification process, this crafted file can trigger an error in the OpenPGP signature parsing code, leading to an unconditional termination of the rpm process. This issue results in an application level denial of service, making the system unable to process RPM files for signature verification. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/ |
| Nsauditor 3.0.28.0 contains a structured exception handling buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying malicious input to the DNS Lookup tool. Attackers can craft a payload with SEH chain overwrite and inject shellcode through the DNS Query field to achieve code execution with application privileges. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2025-67968. Reason: This candidate is a reservation duplicate of CVE-2025-67968. Notes: All CVE users should reference CVE-2025-67968 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| A container privilege escalation flaw was found in certain Web Terminal images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A container privilege escalation flaw was found in certain Multicluster Engine for Kubernetes images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A vulnerability was determined in ShadowCloneLabs GlutamateMCPServers up to e2de73280b01e5d943593dd1aa2c01c5b9112f78. Affected by this issue is some unknown functionality of the file src/puppeteer/index.ts of the component puppeteer_navigate. Executing a manipulation of the argument url can lead to server-side request forgery. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
