| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer copy without checking size of input vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
Qsync Central 5.0.0.4 and later |
| A vulnerability has been identified within Fleet where, by default, Fleet will automatically trust a remote server’s certificate when connecting through SSH if the certificate isn’t set in the `known_hosts` file. This could allow the execution of a man-in-the-middle (MitM) attack against Fleet. In case the server that is being connected to has a trusted entry in the known_hosts file, then Fleet will correctly check the authenticity of the presented certificate. |
| PJSIP is a free and open source multimedia communication library written in C. In 2.17 and earlier, the PJSIP AVI parser in pjmedia/src/pjmedia/avi_player.c uses an input-file video chunk length as the number of bytes copied into a frame buffer whose capacity is derived from the declared media dimensions. A crafted AVI file can therefore cause an attacker-controlled out-of-bounds write past the heap allocation when an application plays the file or pulls its frames. The existing size assertion does not protect production release builds, where assertions are disabled. Typical local playback can crash the process, while applications that accept untrusted AVI sources expose a stronger memory-corruption condition. No fixed version is available as of this review. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate symlink target length in NFSv4 CREATE
nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for
NF4LNK symlink targets, allowing a client to force a kmalloc of up to
the maximum RPC payload size (several MiB) per COMPOUND op that persists
until compound teardown. The VFS rejects oversized targets with
ENAMETOOLONG, but the allocation has already occurred.
Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater
than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr()
The BOTH_TIME_SET branch calls fh_verify() early so setattr_prepare()
can inspect the dentry. This causes nfsd_setattr() to skip
fh_want_write(), so notify_change() runs without a mount write
reference.
Add the missing fh_want_write() call after the early fh_verify(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix UAF in async copy cancel and shutdown
An async copy could be freed or used after free while a teardown caller
(OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the
copy kthread:
- find_async_copy() bumped copy->refcount but left the copy on
clp->async_copies, so the reaper's cleanup_async_copy() could run
release_copy_files() concurrently with a cancel/shutdown caller. Both
put and NULL nf_src/nf_dst without a common lock, double-putting the
nfsd_file and freeing it early.
- nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses
of the copy (nfsd_update_cmtime_attr() on copy->nf_dst,
nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit
as "kthread done, skip kthread_stop()", so a teardown caller ran
release_copy_files() -- which puts and NULLs nf_dst -- while the
kthread still dereferenced it (NULL/UAF).
- copy->copy_task was never pinned. The one-shot kthread self-reaps on
return, so kthread_stop()'s get_task_struct() could touch a freed
task_struct.
- co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a
reference only on the client, so a concurrent teardown could free
the copy while the CB_OFFLOAD callback was in flight.
Fix the teardown lifetime as a whole:
- find_async_copy() unlinks the copy (clear cp_clp, list_del_init)
under async_lock; the cancel, shutdown, and sb-cancel paths drop the
list-membership reference via nfs4_put_copy() after nfsd4_stop_copy().
Drop the now-redundant list_del fixup from cleanup_async_copy().
- Because unlinking hides the copy from the reaper, its
cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids
entry; the cancel/shutdown/sb-cancel paths now call
nfs4_free_copy_state() themselves (while cp_clp is still valid) so
the entry does not dangle at freed memory for the laundromat and
manage_cpntf_state() to dereference.
- Give the kthread its own reference, taken in nfsd4_copy() before
wake_up_process() and dropped at the end of nfsd4_do_async_copy();
call wake_up_process() before list_add().
- Pin the task_struct with get_task_struct() in nfsd4_copy(), released
in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread
exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now
always kthread_stop()s before release_copy_files(); completion is
still reported via NFSD4_COPY_F_COMPLETED, so
nfsd4_has_active_async_copies() is unaffected. Each teardown caller
removes the copy from clp->async_copies first, so kthread_stop() runs
exactly once.
- Take a copy reference in nfsd4_send_cb_offload(), dropped in
nfsd4_cb_offload_release(). The kthread still holds its own reference
there, so the refcount_inc() cannot race the final free.
- Read cp_clp with smp_load_acquire() to pair with the unordered
set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE
The NFSv2 sattr decoder converts the wire useconds to nanoseconds in
svcxdr_decode_sattr():
iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC;
tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in
unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds
value such as 4294968 wraps to tv_nsec == 704. The corruption therefore
happens during decode, before any proc function can inspect the value,
and a later range check on tv_nsec would see an in-range result and
accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply.
NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return
for a malformed time argument, and the check cannot move to the proc
function the way the v3/v4 nsec range checks do.
Guard the raw useconds before the multiplication and reject values
greater than 1000000. useconds == 1000000 is kept: it is the Sun
convention for "set to the current server time", and the in-tree Linux
NFSv2 client emits it in both the atime and the mtime field for a plain
touch / utimes(file, NULL) (see encode_sattr() and
xdr_encode_current_server_time() in fs/nfs/nfs2xdr.c). Rejecting 1000000
would turn that common operation into a hard decode failure for both
SETATTR and CREATE. 1000000 * NSEC_PER_USEC is 10^9, which does not wrap
on ILP32, so the Sun convention value passes through safely. Only
genuinely out-of-range values (> 1000000) are rejected. The atime and
mtime guards are therefore symmetric.
The decoder only applied the Sun convention in the mtime block, which
clears ATTR_ATIME_SET|ATTR_MTIME_SET when mtime useconds == 1000000. If a
client puts 1000000 in the atime field but not in the mtime field, the
atime block stored an out-of-range tv_nsec (10^9) and left ATTR_ATIME_SET
set, so the bogus value reached the filesystem. Apply the convention in
the atime block as well, clearing ATTR_ATIME_SET so the server uses its
current time and ignores the value. Only ATTR_ATIME_SET is cleared there.
The mtime block keeps its existing behavior, where 1000000 means "set
both atime and mtime to now".
[ cel: various tweaks, addenda, and clean-ups ] |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent lock owner use-after-free during client teardown
__destroy_client() releases a client's open owners, but a lock owner
whose only reference is a blocked lock (nbl) stays on
cl_ownerstr_hashtbl. client_has_state() does not count a bare owner,
so DESTROY_CLIENTID can reach __destroy_client() with such owners
present.
__destroy_client() then walks the table, calling remove_blocked_locks()
on each owner without a reference. Freeing a blocked lock drops the
owner reference held via flc_owner. The per-net laundromat reaps
blocked locks from nn->blocked_locks_lru independently of client state.
The two paths share blocked_locks_lock only for the list splice, not
the owner's lifetime. The laundromat therefore frees the owner as
__destroy_client() dereferences it, a NULL dereference in
remove_blocked_locks().
nfsd4_release_lockowner() holds a reference across the same call;
__destroy_client() does not. Hold cl_lock across the walk, taking a
reference and unhashing each owner, then drop it before
remove_blocked_locks() and nfs4_put_stateowner(), which take
blocked_locks_lock and cl_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject buckets with mismatched CRUSH ids
crush_decode() stores bucket data by array slot, and the mapper later
derives the per-bucket workspace index from the decoded bucket id. A
malformed map can therefore make one bucket reuse another bucket's
workspace by encoding an id different from -1 - slot.
For uniform buckets, the second replica selection expands the source
bucket's permutation into that aliased workspace buffer. If the source
bucket is larger than the aliased bucket, the write runs past the smaller
permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN
reports a slab OOB write of 4 bytes in bucket_perm_choose().
Reject buckets whose encoded id does not match their array slot. Valid
CRUSH maps already use the canonical negative id corresponding to the
bucket slot, so this restores the invariant expected by
work->work[-1 - in->id] without changing valid map behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
list_for_each_entry() iterates ci->i_cap_flush_list but drops
i_ceph_lock to send cap messages. During the unlock window,
handle_cap_flush_ack() can acquire i_ceph_lock, detach cf entries
with tid <= flush_tid from the list, release i_ceph_lock, and free
them via ceph_free_cap_flush() outside any lock. When the original
thread reacquires i_ceph_lock and the for-loop macro advances via
cf = list_next_entry(cf, i_list), it dereferences cf->i_list.next
on freed memory.
The race timeline:
__kick_flushing_caps() handle_cap_flush_ack()
----------------------- -----------------------
holds i_ceph_lock <---
iterates to cf (tid=10)
prepares FLUSH message
drops i_ceph_lock <---
__send_cap() ── FLUSH(tid=10)
MDS sends FLUSH_ACK(tid=10)
---> acquires i_ceph_lock
cf->tid(10) <= flush_tid(10),
detaches cf from i_cap_flush_list
drops i_ceph_lock
ceph_free_cap_flush(cf) <- frees it!
acquires i_ceph_lock <---
for-loop advances:
cf = list_next_entry(cf, i_list)
-- UAF on freed cf->i_list.next
The cf was just sent by __kick_flushing_caps itself via __send_cap().
The MDS may respond with FLUSH_ACK quickly enough that
handle_cap_flush_ack() frees cf before __kick_flushing_caps can
finish the iteration.
Fix by converting to a manual while loop: save the next pointer
under i_ceph_lock before dropping it, then use the saved pointer
after reacquiring, so the potentially-freed cf is never accessed again. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
MDSMap export_targets entries are monitor controlled. check_new_map()
uses each entry as a bit number in a fixed stack bitmap, so a rank
outside the protocol namespace can make set_bit() write past the end of
the array.
Reject ranks outside CEPH_MAX_MDS while decoding the map. Do not
validate against possible_max_rank here because maps may legitimately
reference ranks beyond a temporarily reduced max_mds. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() are the two places that hold the block
and the caller at once. Reject there when the two value sizes disagree.
Arrays only ever read their own blocks, so this fires on crafted metadata
only. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()
ip6_tnl_xmit() may need to expand headroom before it can push the
outer IPv6 and optional encap headers. It currently does that with
skb_realloc_headroom(), copies skb->sk ownership, consumes the original
skb, and then continues processing with the replacement skb kept only in
its local variable.
That is safe only if the helper cannot fail afterwards. But this helper
still has post-reallocation error exits. collect_md tunnels reject
non-NONE encap after the replacement, and ip6_tnl_encap() can also fail
later. In those cases the helper returns an error to its callers while
the caller still only has the original skb pointer.
Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on
error, so they can end up freeing an skb that ip6_tnl_xmit() already
consumed.
Use skb_cow_head() instead. It provides the required headroom and
writability without privately replacing the caller-owned skb, so later
error returns cannot leave callers with a stale pointer.
The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING
and already call skb_cow_head() before entering ip6_tnl_xmit(). They do
not rely on the removed skb_shared() reallocation. This also makes the
IPv6 tunnel path consistent with ip_tunnel_xmit(). |
