| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pnpm is a package manager. From 11.3.0 until 11.5.3, `pnpm stage download` derived a local filename from registry-controlled package name and version fields. A crafted manifest could escape the selected download directory and overwrite another reachable file. The merged fix validates both fields, derives one safe filename, and verifies the final destination before writing. This vulnerability is fixed in 11.5.3. |
| Mistune is a Python Markdown parser with renderers and plugins. Prior to 3.3.0, Mistune is vulnerable to a CPU exhaustion DoS due to superlinear (approximately O(n²)) behavior in parse_link_text. When parsing Markdown containing many consecutive [ characters, parse_link_text repeatedly scans the input using a regex search inside a loop. Each iteration re-scans a large portion of the remaining string, resulting in quadratic-time behavior. An attacker-controlled Markdown input can therefore trigger excessive CPU usage with a very small payload. This vulnerability is fixed in 3.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in get_manuf_info()
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
[ johan: amend commit message; also check for short descriptors ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: shm: fix shm leak in register_shm_helper()
register_shm_helper() allocates shm before calling
iov_iter_npages(). If iov_iter_npages() returns 0, the function
jumps to err_ctx_put and leaks shm.
This can be triggered by TEE_IOC_SHM_REGISTER with
struct tee_ioctl_shm_register_data where length is 0.
Jump to err_free_shm instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: ocp: fix resource freeing order
Commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable
events") added a call to ptp_disable_all_events() which changes the
configuration of pins if they support EXTTS events. In ptp_ocp_detach()
pins resources are freed before ptp_clock_unregister() and it leads to
use-after-free during driver removal. Fix it by changing the order of
free/unregister calls. To avoid irq handler running on the other core
while ptp device unregistering, call synchronize_irq() after HW is
configured to stop producing irqs and no irqs are in-flight. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds check for firmware runtime memory
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: revalidate bridge ports
ebt_redirect_tg() dereferences br_port_get_rcu() return without a
NULL check, causing a kernel panic when the bridge port has been
removed between the original hook invocation and an NFQUEUE
reinject.
A mere NULL check isn't sufficient, however. As sashiko review
points out userspace can not only remove the port from the bridge,
it could also place the device in a different virtual device, e.g.
macvlan.
If this happens, we must drop the packet, there is no way for us to
reinject it into the bridge path.
Switch to _upper API, we don't need the bridge port structure.
Also, this fix keeps another bug intact:
Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER
too aggressive, which prevents certain logging features when queueing
in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old
CONFIG_BRIDGE_NETFILTER cruft is off.
Fixes tag is a common ancestor, this was always broken. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
(cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL deref on rsu_send_msg() timeout in probe
rsu_send_msg() can return -ETIMEDOUT when
wait_for_completion_interruptible_timeout() fires while the SMC call is still
pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION,
COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE
call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then
fall through and queue the next request on the same channel. The next svc
kthread that runs will dereference pdata->chan->scl in its receive callback
path, triggering a NULL pointer dereference identical to the one fixed by
commit c45f7263100c ("firmware: stratix10-rsu: Fix NULL pointer dereference
when RSU is disabled") for the COMMAND_RSU_STATUS path.
Apply the same cleanup pattern to the remaining failure paths: remove the
async client, free the channel, and return early so no further messages are
queued on a channel whose scl has been cleared.
While at it, clean up stratix10_rsu_probe() in two ways without changing
behavior:
- Drop redundant zero-initialization of fields already cleared by
devm_kzalloc(): client.receive_cb, status.* and spt0/1_address
(INVALID_SPT_ADDRESS is 0x0).
- Replace five identical 3-line error-cleanup blocks
(stratix10_svc_remove_async_client() + stratix10_svc_free_channel() +
return ret) with goto labels (remove_async_client, free_channel),
matching the standard kernel resource-unwinding pattern and making it
easier to extend the probe sequence without forgetting matching
cleanup.
Also move init_completion() next to mutex_init() so sync-primitive
initialization is grouped before anything that could trigger a
callback.
---
v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a
centralize exit for all the rsu_send_async_msg() and rsu_send_msg(). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix DMA address corruption due to find_vma misuse
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA. |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.46.0 until 1.74.3, rclone rcd --rc-serve accepts unauthenticated GET and HEAD requests to paths of the form: /[remote:path]/object. The remote value is parsed from the URL and passed to normal backend initialization. Inline remote configuration can set backend options that execute local commands during initialization. As a result, a single unauthenticated GET or HEAD request can execute a command as the rclone process user. This vulnerability is fixed in 1.74.3. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| An attacker can send a web request that causes unlimited memory
allocation in the internal web server, leading to a denial of service.
The internal web server is disabled by default. |
| A vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.2.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| Relative Path Traversal vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 1.0.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
