| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Simple JWT Login WordPress plugin before 3.6.8 does not validate the audience of the Google identity tokens it accepts, allowing unauthenticated users to authenticate as any user whose email address such a token carries, up to and including an administrator. Every site with the Simple JWT Login WordPress plugin before 3.6.8's Google sign-in enabled is affected. |
| SolarWinds Web Help Desk is found to be affected by a SAML authentication bypass vulnerability. This requires the SAML 2.0 authentication method to be enabled. |
| Privilege Escalation via URL Parameter is reported in Apache Ranger versions <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 could allow a remote attacker to access sensitive information due to an inconsistent interpretation of an HTTP request by a reverse proxy. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to access server resources with the privileges of an authenticated user due to improper authentication during NTLM session negotiation. |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox.
When verifying an unparsed opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), the toolbox decodes the response into an introspectResp struct where the Active field is declared as a pointer to a boolean (*bool). The code only explicitly rejects a token if the response contains a populated active field set to false (if introspectResp.Active != nil && !*introspectResp.Active). If an introspection endpoint responds with a payload that completely omits the mandatory active key, the internal variable remains nil, causing the conditional check to short-circuit. As a result, Toolbox accepts authorization tokens missing the "active" field, granting access to protected tools and underlying data sources. |
| An authentication bypass vulnerability exists in the generic opaque token validation path (validateOpaqueToken) of googleapis/mcp-toolbox.
When the toolbox validates an opaque token via an OAuth 2.0 introspection endpoint (RFC 7662), it decodes the response into an introspectResp struct. However, the subsequent claim-checking logic (validateClaims) evaluates the issuer condition as if a.issuer != "" && iss != "". If the external OAuth provider's introspection response omits the optional iss (issuer) field completely, the variable iss defaults to an empty string. This causes the conditional block to evaluate to false and be skipped silently. Consequently, the application accepts tokens issued by unauthorized or unintended third-party identity providers. |
| Vulnerability in the Oracle Cost Management product of Oracle E-Business Suite (component: Cost Planning). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Cost Management. Successful attacks of this vulnerability can result in takeover of Oracle Cost Management. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Cost Management product of Oracle E-Business Suite (component: Cost Planning). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Cost Management. Successful attacks of this vulnerability can result in takeover of Oracle Cost Management. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| The User Session Synchronizer plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in all versions up to, and including, 1.4.0. The `synchronize_session()` function, hooked on `init` and therefore executed on every request, performs no nonce, capability, or shared-secret validation against the attacker-supplied `ussync-key`, `ussync-token`, and `ussync-ref` parameters; when `ussync-key` references an unregistered slot, `get_option()` returns `false` for both the secret key and the domain list, causing the AES-256-CBC encryption key to degrade to the fully predictable `md5('')` and the referer allowlist to collapse to an empty-string match, while the AES IV is unconditionally hard-coded as `md5('another-secret')`. This makes it possible for unauthenticated attackers to supply a crafted request encrypting any known or guessable user email address in the `ussync-ref` parameter, causing the handler to call `wp_set_auth_cookie()` for the matched user and granting full authentication as that user — including administrators — with no prior knowledge of site secrets. |
| SiYuan versions before v3.7.4 contain an authentication bypass vulnerability in the WebSocket endpoint caused by differential parsing of query parameters between authentication exemption and session quarantine checks. Unauthenticated attackers can craft a malicious WebSocket URI with duplicated query parameters to bypass access auth code validation and receive the live kernel event stream including document identifiers, titles, and operation logs. |
| A security flaw has been discovered in treefrogframework treefrog-framework up to 2.11.2. This vulnerability affects the function std::strncmp of the file src/tsessioncookiestore.cpp of the component Session Cookie Handler. The manipulation results in improper authentication. The attack can be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure. |
| A flaw has been found in LB-Link WR1210M 1.0.3. This impacts the function main of the file /www/cgi-bin/backup.cgi of the component Backup Endpoint. This manipulation causes missing authentication. The attack is only possible within the local network. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Tenda AC10 16.03.10.09_multi_TDE01. This vulnerability affects the function R7WebsSecurityHandler of the component httpd. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| The 6Storage Rentals plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.27.0. This is due to the six_storage_create_wp_user() AJAX handler being registered on wp_ajax_nopriv_six_storage_create_wp_user without any nonce, capability, credential, or ownership verification, while calling wp_set_current_user() and wp_set_auth_cookie() for any WordPress user resolved by the attacker-supplied email address. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, by submitting that user's email address. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. When `secureEnabled=true`, FUXA `1.3.0-2773` still allows guest and invalid-token requests to read project, alarms, and scheduler APIs. Version 1.3.1 fixes this issue. |
| Metacat is data repository software that helps researchers preserve, share, and discover data. Metacat versions 2.0.0 through 3.4.0 contain an unauthenticated SQL injection vulnerability in the `/cn/v1/object` and `/cn/v2/object` REST API endpoints due to unsanitized user input that can be passed through to the backend SQL database. The `nodeId` parameter can be modified to inject SQL commands, and the results are returned in error messages. Metacat appends the user-supplied data into the sql query without sanitization or parameterization. This allows extraction of arbitrary data from the underlying PostgresQL database, fully exposing protected information to the attacker. This is accomplished by leveraging the error reporting mechanisms in Metacat, where SQL error responses are mirrored back to the caller in the XML error message returned by Metacat. One approach, for example, is to use the PostgreSQL `CAST` function to generate an error with the results of an arbitrary subquery, which is then injected into the XML error message returned by Metacat. Attackers do not need to be authenticated to execute the attack. In addition, arbitrary SQL statements that insert, update, and delete data in the Metacat database can be executed, resulting in full compromise of all data in the database. Full proof of concept attacks have been developed and verified for these vulnerabilities. The impact of this vulnerability is critical for Metacat deployments in the DataONE network where information from the database can be exfiltrated, added, changed, or deleted. This includes management information about the data catalog, access log information about who accessed data, identifying information about individuals including their ORCID identifier and client IP address, access control information about who should be able to access and modify data, and other critical internals of the data system. This sql injection vulnerability was remediated fully in Metacat version 3.4.1. If upgrading to Metacat 3.4.1 isn't immediately possible, most deployments can mitigate the issue by disabling the `/cn` REST endpoints in the webapp deployment. This API is not needed or used by member repositories in the DataONE network, as it is only used by the DataONE Coordinating Node deployments. Consequently, this API can be disabled without reduction of functionality for most deployments. To disable the vulnerable endpoints, simply remove the servlet and servlet-mapping for the `/cn` endpoints in the servlet engine associated with the two servlets, `edu.ucsb.nceas.metacat.restservice.v1.CNRestServlet` and `edu.ucsb.nceas.metacat.restservice.v2.CNRestServlet`. For example, in Tomcat, remove the relevant `servlet-mapping` elements from the application web.xml file in Metacat. |
| The Epeken All Kurir for Woocommerce WordPress plugin through 2.1.2 does not verify that a payment-confirmation request originates from the owner of the targeted order, nor that any payment actually occurred, allowing unauthenticated attackers to mark arbitrary orders as confirmed and, in a non-default configuration, paid. |
| Budibase is an open-source low-code platform. Prior to 3.39.30, the OIDC flow in packages/backend-core/src/middleware/passport/sso/oidc.ts resolved an email without getEmailVerified or an email_verified requirement, and packages/backend-core/src/middleware/passport/sso/sso.ts then used users.getGlobalUserByEmail as a fallback account-linking key. An attacker who can authenticate through a configured identity provider that asserts a victim email as unverified can have a fresh provider identity merged into the victim Budibase account and inherit the victim roles. This issue is fixed in version 3.39.30. |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, the POST /api/v1alpha1/autobuild endpoint in internal/openchoreo-api/api/handlers/webhook_handler.go selected a webhook provider from caller-controlled X-Event-Key, accepted Bitbucket requests without HMAC-SHA256 in X-Hub-Signature or a configured bitbucket-secret, and allowed unauthenticated build triggers for components matched by repository URL and branch, including cross-provider triggers using attacker-supplied commit SHAs. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2. |
