Search

Search Results (426076 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99289 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock.
CVE-2026-99292 1 Linux 2 Linux, Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl() In id_mode_to_cifs_acl(), while the chown branch reserves sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_acl) and the worst-case ACE space after commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or 5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace) on posix). However, the chmod branch also invokes build_sec_desc() -> copy_sec_desc(), which unconditionally writes the Owner SID at pnntsd + sidsoffset and the Group SID at pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total), and set_chmod_dacl() always writes a struct smb_acl header (8 bytes) even when the source descriptor has dacloffset == 0. When a security descriptor has compact or overlapping Owner/Group SIDs (or dacloffset == 0), calling chmod() under-allocates pnntsd and writes past the end of the slab buffer. Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus sizeof(struct smb_ntsd) on the posix path) in the chmod branch of id_mode_to_cifs_acl().
CVE-2026-124629 2026-11-16 N/A
In affected versions of Octopus Server, insufficient authorization checks on scheduled project triggers allowed users who were permitted to deploy existing releases, but not to create new ones, to configure a trigger that could result in new releases being created and deployed without the required permission being assigned. The resulting audit events were attributed to the system rather than to the user who configured the trigger.
CVE-2026-99293 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: fuse: don't BUG when the copy buffer is exhausted fuse_copy_fill() hits BUG_ON(!err) once the iterator backing the copy runs out of pages. Over io-uring the amount copied is not bounded by the payload buffer the server registered, so an unprivileged user can drain the iterator and panic the host - mount a FUSE filesystem with small payload buffers, then setxattr() a larger value: kernel BUG at fs/fuse/dev.c:1064! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 148 Comm: exploit Not tainted 7.3.0-rc1 #2 RIP: 0010:fuse_copy_fill (fs/fuse/dev.c:1033) Call Trace: <TASK> fuse_copy_args (fs/fuse/dev.c:1354 fs/fuse/dev.c:1380) fuse_uring_args_to_ring (fs/fuse/dev_uring.c:891) fuse_uring_prepare_send (fs/fuse/dev_uring.c:940 fs/fuse/dev_uring.c:1057) fuse_uring_send_in_task (fs/fuse/dev_uring.c:1745) tctx_task_work_run (io_uring/tw.c:96) tctx_task_work (io_uring/tw.c:133) task_work_run (kernel/task_work.c:233) io_run_task_work (io_uring/tw.h:84) io_cqring_wait (io_uring/wait.c:278) __do_sys_io_uring_enter (io_uring/io_uring.c:2676) do_syscall_64 (arch/x86/entry/syscall_64.c:61) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The reply path can drain it the same way, via the server-supplied payload_sz in fuse_uring_copy_from_ring(). Return -EIO instead. All three fuse_copy_fill() callers already propagate the error.
CVE-2026-99297 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix double free in em28xx_alloc_urbs When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs() explicitly frees all items within usb_bufs->buf before calling em28xx_uninit_usb_xfer(), which also frees these items, causing them to be freed twice. BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) Free of addr ffff88802fd37c00 by task kworker/1:2/1182 Workqueue: events request_module_async Call Trace: kasan_report_invalid_free (mm/kasan/report.c:557) check_slab_allocation (mm/kasan/common.c:235) kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1)) usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96) usb_free_urb (drivers/usb/core/urb.c:95) em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439) em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Freed by task 1182: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801) em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084) em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698) em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer() handle the cleanup.
CVE-2026-99300 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: media: go7007: only set audio_enabled if go7007_snd_init() succeeded go7007_register_encoder() sets go->audio_enabled before calling go7007_snd_init() and discards its return value. go7007_snd_init() assigns go->snd_context only on success, so a failed ALSA setup leaves audio_enabled set with snd_context still NULL. The disconnect path tests audio_enabled and calls go7007_snd_remove(), which dereferences snd_context unconditionally. go7007_snd_init() returns -ENODEV once its never-decremented static card counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the next attach; no memory pressure is needed. Set go->audio_enabled only once go7007_snd_init() has succeeded. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: usb_hub_wq hub_event RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273) Call Trace: go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336) usb_unbind_interface (drivers/usb/core/driver.c:461) device_remove (drivers/base/dd.c:618) device_release_driver_internal (drivers/base/dd.c:1349) bus_remove_device (drivers/base/bus.c:664) device_del (drivers/base/core.c:3965) usb_disable_device (drivers/usb/core/message.c:1478) usb_disconnect hub_event (drivers/usb/core/hub.c:5966) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception
CVE-2026-99303 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix NULL pointer dereference on VT switch + selection When selecting/pasting very quickly after VT switch, the tty is not set yet, leading to a NULL dereference. We can just abort the operation.
CVE-2026-99308 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
CVE-2026-99311 1 Linux 1 Linux Kernel 2026-11-16 N/A
In the Linux kernel, the following vulnerability has been resolved: udf: fix return value for non-recorded-allocated extents in udf_map_block() When someone creates a corrupted UDF filesystem where symlink contains other extent type than EXT_RECORDED_ALLOCATED, it can leads to a crash like: Oops: general protection fault KASAN: maybe wild-memory-access RIP: 0010:page_get_link (fs/namei.c:6503) Call Trace: vfs_readlink (fs/namei.c:6419) do_readlinkat (fs/stat.c:583) __x64_sys_readlink (fs/stat.c:605 fs/stat.c:602 fs/stat.c:602) This is because in this case udf_map_block() fails to convert return value of inode_bmap() from 1 to 0. Returned '1' propagates through udf_bread() all the way up to __page_get_link() where it ends up being treated as a folio pointer with obvious results. Move the reset to 0 line outside the if, so udf_map_block() returns either 0 or -errno, even if the extent type is not EXT_RECORDED_ALLOCATED.
CVE-2026-67250 2026-11-16 7.3 High
A local privilege escalation (LPE) vulnerability in Pebble’s installers could allow a local attacker with low privilege access to place a malicious Dynamic Link Library (DLL) where a privileged executable file will load it.
CVE-2026-110941 2026-11-16 6.8 Medium
Mattermost Desktop App versions <=6.3 6.0.3 6.3.2.0 fail to monitor secondary browser windows in the local network access filter which allows an attacker-controlled server to access private network resources via opening pop-out or widget windows. Mattermost Advisory ID: MMSA-2026-00778
CVE-2026-126181 1 Fortinet 1 Fortimanager 2026-11-16 8 High
A use of hard-coded credentials vulnerability in Fortinet FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11 may allow an adjacent-network authenticated attacker with user permission to join the FGFM configuration-sync mesh of the affected FortiGate deployment via the default pre-shared key.
CVE-2026-110509 1 Wordpress-extensions 1 Essential Addons For Elementor 2026-11-16 5.3 Medium
The Essential Addons for Elementor WordPress plugin before 6.8.7 does not restrict the post type or meta query an unauthenticated visitor can pass to its pagination endpoint, which could allow them to read content of non-public post types and recover the values of private custom fields on published posts.
CVE-2026-111027 1 Wordpress-extensions 1 Welcart E-commerce 2026-11-16 6.8 Medium
The Welcart e-Commerce WordPress plugin before 2.12.6 does not properly sanitise and escape a parameter before using it in a SQL query, and strips the escaping it had applied before running the query, allowing users with the Editor role or higher to perform SQL injection attacks.
CVE-2026-111031 1 Wordpress-extensions 1 Welcart E-commerce 2026-11-16 4.7 Medium
The Welcart e-Commerce WordPress plugin before 2.12.6 does not validate a user-supplied URL before using it in a redirect, allowing unauthenticated attackers to redirect users to arbitrary external websites.
CVE-2026-129784 2026-11-16 8.5 High
The httpx Ruby gem parses JSON response bodies through its transcoder layer. HTTPX::Response#json delegates to Transcoder::JSON.decode, and when the oj gem is loaded and multi_json is absent, the decoder falls back to json_load, which calls Oj.load(response.to_s) with no mode option. Oj.load defaults to :object mode, in which a response document can allocate any already-loaded Ruby class ("^o":"ClassName") and set its instance variables, or resolve a class or module reference ("^c":"Name"). An attacker who controls, or can influence, the URL an application fetches with HTTPX.get(url).json therefore controls object instantiation in the victim process. With a matching gadget chain, this issue can potentially cause remote code execution. Affects httpx 1.9.0; fixed in 1.9.1.
CVE-2026-111032 1 Wordpress-extensions 1 Welcart E-commerce 2026-11-16 3.8 Low
The Welcart e-Commerce WordPress plugin before 2.12.6 does not properly verify authorization against the targeted product before processing SKU changes, because its capability check is not tied to the product being edited, allowing any authenticated user with Author-level access or higher to read, modify, create, delete and re-order the SKU data (including prices, confidential cost prices and stock levels) of any product, including those belonging to other users.
CVE-2026-115281 1 Wordpress-extensions 1 Recipe Card Blocks Lite 2026-11-16 6.8 Medium
The Recipe Card Blocks Lite WordPress plugin before 3.6.4 does not sanitize and cast a block and shortcode attribute before concatenating it into SQL queries, allowing authenticated users with Contributor-level access or above to perform SQL injection attacks.
CVE-2026-109381 2 Magepeopleteam, Wordpress-extensions 2 Event Booking Manager For Woocommerce – Sell Tickets, Event Registration, Rsvp & Event Calendar, Event Booking Manager For Woocommerce 2026-11-16 7.2 High
The Mage Eventpress plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 5.7.8 This is due to the mep_grant_shop_manager_access() function hooking user_has_cap and unconditionally granting manage_options whenever an attacker-controllable request marker matches — most notably $_GET['page'] starting with 'mep_' or 'mpwem_', which is never validated against an actually registered EventPress screen. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to elevate their privileges to Administrator by appending ?page=mep_x to core admin URLs (options-general.
CVE-2026-115282 1 Wordpress-extensions 1 Recipe Card Blocks Lite 2026-11-16 5.3 Medium
The Recipe Card Blocks Lite WordPress plugin before 3.6.4 does not perform an authorization check before rendering posts through its recipe print feature, allowing unauthenticated users to disclose the title, ID and recipe content of unpublished posts, including drafts, pending, private and password-protected posts, that contain a recipe card block. Its optional "print only published posts" protection does not prevent this, because the status check is applied to a different post than the one ultimately rendered.