| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails
If the dpu_format_populate_layout() fails, then FB is prepared, but not
cleaned up. This ends up leaking the pin_count on the GEM object and
causes a splat during DRM file closure:
msm_obj->pin_count
WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc
[...]
Call trace:
update_lru_locked+0xc4/0xcc
put_pages+0xac/0x100
msm_gem_free_object+0x138/0x180
drm_gem_object_free+0x1c/0x30
drm_gem_object_handle_put_unlocked+0x108/0x10c
drm_gem_object_release_handle+0x58/0x70
idr_for_each+0x68/0xec
drm_gem_release+0x28/0x40
drm_file_free+0x174/0x234
drm_release+0xb0/0x160
__fput+0xc0/0x2c8
__fput_sync+0x50/0x5c
__arm64_sys_close+0x38/0x7c
invoke_syscall+0x48/0x118
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x120
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
irq event stamp: 129818
hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124
hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c
softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8
softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20
Patchwork: https://patchwork.freedesktop.org/patch/600714/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
tick/broadcast: Move per CPU pointer access into the atomic section
The recent fix for making the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed as compilers hoist the access into the non-preemptible
region where the pointer is actually used. But of course it's valid that
the compiler keeps it at the place where the code puts it which rightfully
triggers:
BUG: using smp_processor_id() in preemptible [00000000] code:
caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0
Move it to the actual usage site which is in a non-preemptible region. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mgag200: Bind I2C lifetime to DRM device
Managed cleanup with devm_add_action_or_reset() will release the I2C
adapter when the underlying Linux device goes away. But the connector
still refers to it, so this cleanup leaves behind a stale pointer
in struct drm_connector.ddc.
Bind the lifetime of the I2C adapter to the connector's lifetime by
using DRM's managed release. When the DRM device goes away (after
the Linux device) DRM will first clean up the connector and then
clean up the I2C adapter. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix pti_clone_pgtable() alignment assumption
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/smt: Fix unbalance sched_smt_present dec/inc
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Initialize beyond-EOF page contents before setting uptodate
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Fix shift-out-of-bounds in dbDiscardAG
When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.
This patch fixes the issue by exiting the loop directly when negative
shift is found. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: wait for previous gc cycles when removing port
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
__run_timer_base kernel/time/timer.c:2428 [inline]
__run_timer_base kernel/time/timer.c:2421 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2437 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL dereference at band check in starting tx ba session
In MLD connection, link_data/link_conf are dynamically allocated. They
don't point to vif->bss_conf. So, there will be no chanreq assigned to
vif->bss_conf and then the chan will be NULL. Tweak the code to check
ht_supported/vht_supported/has_he/has_eht on sta deflink.
Crash log (with rtw89 version under MLO development):
[ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 9890.526102] #PF: supervisor read access in kernel mode
[ 9890.526105] #PF: error_code(0x0000) - not-present page
[ 9890.526109] PGD 0 P4D 0
[ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI
[ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1
[ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018
[ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core]
[ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211
[ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3
All code
========
0: f7 e8 imul %eax
2: d5 (bad)
3: 93 xchg %eax,%ebx
4: 3e ea ds (bad)
6: 48 83 c4 28 add $0x28,%rsp
a: 89 d8 mov %ebx,%eax
c: 5b pop %rbx
d: 41 5c pop %r12
f: 41 5d pop %r13
11: 41 5e pop %r14
13: 41 5f pop %r15
15: 5d pop %rbp
16: c3 retq
17: cc int3
18: cc int3
19: cc int3
1a: cc int3
1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax
22: ff
23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax
2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction
2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a
33: bb ea ff ff ff mov $0xffffffea,%ebx
38: eb cc jmp 0x6
3a: 49 rex.WB
3b: 8b .byte 0x8b
3c: 84 24 10 test %ah,(%rax,%rdx,1)
3f: f3 repz
Code starting with the faulting instruction
===========================================
0: 83 38 03 cmpl $0x3,(%rax)
3: 0f 84 37 fe ff ff je 0xfffffffffffffe40
9: bb ea ff ff ff mov $0xffffffea,%ebx
e: eb cc jmp 0xffffffffffffffdc
10: 49 rex.WB
11: 8b .byte 0x8b
12: 84 24 10 test %ah,(%rax,%rdx,1)
15: f3 repz
[ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246
[ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8
[ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685
[ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873
[ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70
[ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000
[ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000
[ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0
[ 9890.526321] Call Trace:
[ 9890.526324] <TASK>
[ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479)
[ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713)
[ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix the null pointer dereference for smu7
optimize the code to avoid pass a null pointer (hwmgr->backend)
to function smu7_update_edc_leakage_table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the null pointer dereference to ras_manager
Check ras_manager before using it |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing
This commit adds null checks for the 'stream' and 'plane' variables in
the dcn30_apply_idle_power_optimizations function. These variables were
previously assumed to be null at line 922, but they were used later in
the code without checking if they were null. This could potentially lead
to a null pointer dereference, which would cause a crash.
The null checks ensure that 'stream' and 'plane' are not null before
they are used, preventing potential crashes.
Fixes the below static smatch checker:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: fix null pointer dereference in drm_client_modeset_probe
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Add error handling to pair_device()
hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.
Fixed by adding error handling in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Clean up error handling in vpci_scan_bus()
Smatch complains about inconsistent NULL checking in vpci_scan_bus():
drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)
Instead of printing an error message and then crashing we should return
an error code and clean up.
Also the NULL check is reversed so it prints an error for success
instead of failure. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: always initialize seqpacket_allow
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix event leak upon exit
When a task is scheduled out, pending sigtrap deliveries are deferred
to the target task upon resume to userspace via task_work.
However failures while adding an event's callback to the task_work
engine are ignored. And since the last call for events exit happen
after task work is eventually closed, there is a small window during
which pending sigtrap can be queued though ignored, leaking the event
refcount addition such as in the following scenario:
TASK A
-----
do_exit()
exit_task_work(tsk);
<IRQ>
perf_event_overflow()
event->pending_sigtrap = pending_id;
irq_work_queue(&event->pending_irq);
</IRQ>
=========> PREEMPTION: TASK A -> TASK B
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
// FAILS: task work has exited
task_work_add(&event->pending_task)
[...]
<IRQ WORK>
perf_pending_irq()
// early return: event->oncpu = -1
</IRQ WORK>
[...]
=========> TASK B -> TASK A
perf_event_exit_task(tsk)
perf_event_exit_event()
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// leak event due to unexpected refcount == 2
As a result the event is never released while the task exits.
Fix this with appropriate task_work_add()'s error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix event leak upon exec and file release
The perf pending task work is never waited upon the matching event
release. In the case of a child event, released via free_event()
directly, this can potentially result in a leaked event, such as in the
following scenario that doesn't even require a weak IRQ work
implementation to trigger:
schedule()
prepare_task_switch()
=======> <NMI>
perf_event_overflow()
event->pending_sigtrap = ...
irq_work_queue(&event->pending_irq)
<======= </NMI>
perf_event_task_sched_out()
event_sched_out()
event->pending_sigtrap = 0;
atomic_long_inc_not_zero(&event->refcount)
task_work_add(&event->pending_task)
finish_lock_switch()
=======> <IRQ>
perf_pending_irq()
//do nothing, rely on pending task work
<======= </IRQ>
begin_new_exec()
perf_event_exit_task()
perf_event_exit_event()
// If is child event
free_event()
WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1)
// event is leaked
Similar scenarios can also happen with perf_event_remove_on_exec() or
simply against concurrent perf_event_release().
Fix this with synchonizing against the possibly remaining pending task
work while freeing the event, just like is done with remaining pending
IRQ work. This means that the pending task callback neither need nor
should hold a reference to the event, preventing it from ever beeing
freed. |
