| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free and list corruption on sender error
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.send_io.bcredits
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix trace_marker copy link list updates
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
ipc_msg_send_request() waits for a generic netlink reply using an
ipc_msg_table_entry on the stack. The generic netlink handler
(handle_generic_event()/handle_response()) fills entry->response under
ipc_msg_table_lock, but ipc_msg_send_request() used to validate and free
entry->response without holding the same lock.
Under high concurrency this allows a race where handle_response() is
copying data into entry->response while ipc_msg_send_request() has just
freed it, leading to a slab-use-after-free reported by KASAN in
handle_generic_event():
BUG: KASAN: slab-use-after-free in handle_generic_event+0x3c4/0x5f0 [ksmbd]
Write of size 12 at addr ffff888198ee6e20 by task pool/109349
...
Freed by task:
kvfree
ipc_msg_send_request [ksmbd]
ksmbd_rpc_open -> ksmbd_session_rpc_open [ksmbd]
Fix by:
- Taking ipc_msg_table_lock in ipc_msg_send_request() while validating
entry->response, freeing it when invalid, and removing the entry from
ipc_msg_table.
- Returning the final entry->response pointer to the caller only after
the hash entry is removed under the lock.
- Returning NULL in the error path, preserving the original API
semantics.
This makes all accesses to entry->response consistent with
handle_response(), which already updates and fills the response buffer
under ipc_msg_table_lock, and closes the race that allowed the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix NULL dereference on notify error path
Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier
registration for unsupported events") the call chains leading to the helper
__scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to
get an handler for the requested event key, while the current helper can
still return a NULL when no handler could be found or created.
Fix by forcing an ERR_PTR return value when the handler reference is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Ensure swevent hrtimer is properly destroyed
With the change to hrtimer_try_to_cancel() in
perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to
still be active by the time the event gets freed.
Make sure the event does a full hrtimer_cancel() on the free path by
installing a perf_event::destroy handler. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix leakage in __construct_region()
Failing the first sysfs_update_group() needs to explicitly
kfree the resource as it is too early for cxl_region_iomem_release()
to do so. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sma1307: fix double free of devm_kzalloc() memory
A previous change added NULL checks and cleanup for allocation
failures in sma1307_setting_loaded().
However, the cleanup for mode_set entries is wrong. Those entries are
allocated with devm_kzalloc(), so they are device-managed resources and
must not be freed with kfree(). Manually freeing them in the error path
can lead to a double free when devres later releases the same memory.
Drop the manual kfree() loop and let devres handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: return after auxiliary_device_uninit() in error path
When auxiliary_device_add() fails, the error block calls
auxiliary_device_uninit() but does not return. The uninit drops the
last reference and synchronously runs bnge_aux_dev_release(), which sets
bd->auxr_dev = NULL and frees the underlying object. The subsequent
bd->auxr_dev->net = bd->netdev then dereferences NULL, which is not a
good thing to have happen when trying to clean up from an error.
Add the missing return, as the auxiliary bus documentation states is a
requirement (seems that LLM tools read documentation better than humans
do...) |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Fix use-after-free in migration restore
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Drain deferred trigger frees if kthread creation fails
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either. |
| Out of bounds read in GPU in Google Chrome on Android prior to 147.0.7727.117 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Race in GPU in Google Chrome on Windows prior to 147.0.7727.117 allowed a remote attacker to potentially perform a sandbox escape via a crafted video file. (Chromium security severity: Medium) |
