Export limit exceeded: 413947 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413947 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-56840 | 2026-10-23 | 8.8 High | ||
| PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.HTTPApproval renders pending tool approval arguments directly into the approval dashboard HTML. An attacker-controlled tool argument can inject JavaScript into that page. When a human opens the approval URL to inspect the risky tool request, the script runs in the dashboard origin and can POST to the same request's /approve/{request_id}/decide endpoint, causing HTTPApproval to return approved=True. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-56838 | 2026-10-23 | 7.8 High | ||
| PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.59, PraisonAI recipe execution blocks default-denied dangerous tools unless the caller explicitly passes allow_dangerous_tools=True. The normal recipe.run() path enforces this with _check_tool_policy(). The streaming path, recipe.run_stream(), loads the same recipe, checks dependencies, and then calls _execute_recipe() without running the dangerous-tool policy check. As a result, a recipe that honestly declares execute_command in TEMPLATE.yaml requires.tools is denied by recipe.run(), but reaches the execution engine through recipe.run_stream() with allow_dangerous_tools=False. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-56836 | 2026-10-23 | 8.2 High | ||
| PraisonAI is a multi-agent teams system. From version 4.5.112 to before version 4.6.59, PraisonAI's installed console entrypoint is Typer-first. In current releases, the recipe command is registered in the Typer app and praisonai recipe serve dispatches to the deprecated Typer command in src/praisonai/praisonai/cli/commands/recipe.py. That Typer command can start the Recipe HTTP server on a non-localhost interface with no authentication. It prints a deprecation warning, and then launches the server. Because config.auth is absent, create_app() does not attach the API-key or JWT middleware. Unauthenticated requests can then reach the recipe API and, when enabled, /admin/reload. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-56835 | 2026-10-23 | 8.3 High | ||
| PraisonAI is a multi-agent teams system. From version 3.11.0 to before version 4.6.59, PraisonAI's Slack bot applies its configured allowed_users, allowed_channels, and unknown-user pairing policy in the normal Slack message event handler, but not in the adjacent Slack app_mention event handler. A Slack workspace user who can mention the bot in a channel where the Slack app is present can trigger the configured PraisonAI agent even when: the sender is not in BotConfig.allowed_users; the channel is not in BotConfig.allowed_channels; unknown_user_policy="deny" is configured; and the same event content is correctly dropped by the normal message handler. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-56834 | 2026-10-23 | 7.5 High | ||
| PraisonAI is a multi-agent teams system. From version 3.8.1 to before version 4.6.59, PraisonAI's Dynamic Context Discovery feature exposes artifact helper tools through ctx.get_tools(). The implemented artifact tools do not enforce that the supplied artifact_path is an artifact created by the configured store or that it lives under the configured artifact base directory. Instead, artifact_head, artifact_tail, artifact_grep, and artifact_chunk wrap the caller-supplied path directly into an ArtifactRef and then read it from the host filesystem. As a result, any prompt/user/tool-caller that can influence those tool arguments can read files readable by the PraisonAI process, such as project .env files, cloud credentials, SSH keys, source files, or other local data. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-56832 | 2026-10-23 | 8.8 High | ||
| PraisonAI is a multi-agent teams system. From version 4.5.2 to before version 4.6.59, praisonai.bots.DiscordApproval approves a pending dangerous tool call when it sees any later non-bot message in the configured Discord channel whose text is classified as approval, such as yes. As a result, any user who can post in the configured approval channel can approve a pending high-risk tool call by sending yes after the approval message appears. the same PoV also shows that the Slack and Telegram messaging approval backends have no explicit approver allowlist parameter, but the primary report-grade issue is the Discord backend's unthreaded channel cross-talk: the approving message does not need to be a reply or otherwise request-bound. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-112904 | 2026-10-23 | 8.7 High | ||
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. In versions 1.0.8.6 and prior, the nextRestore() and nextBackup() functions in the backup controller accept a file GET parameter and concatenate it directly to DIR_BACKUP without calling sanitizeFileName(). This allows an authenticated administrator to read arbitrary files on the server (via nextRestore) and write SQL dump content to arbitrary locations (via nextBackup). This is inconsistent with the sibling functions restore(), delete(), and download() which all correctly call sanitizeFileName() first. This issue has been patched via commit aa29cb0. | ||||
| CVE-2026-115354 | 1 Mistune Project | 1 Mistune | 2026-10-23 | 6.5 Medium |
| Mistune before 3.3.0 contains a path traversal vulnerability in the opt-in Include directive that allows attackers to read local files by supplying relative or absolute include paths. Attackers who submit Markdown rendered via Markdown.read() can disclose files such as /etc/passwd and inject unescaped HTML or script content into rendered output. | ||||
| CVE-2026-98888 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: kprobes: Allow reentering kprobes while single-stepping A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This can happen when tracing or perf code runs from the debug exception path while the first kprobe is preparing or executing its out-of-line single-step instruction. Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable, the same as a hit in KPROBE_REENTER. This is too strict. A hit in KPROBE_HIT_SS is still a one-level reentry and can be handled by saving the current kprobe state and setting up single-step for the new probe, just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE. The truly unrecoverable case is hitting another kprobe while already in KPROBE_REENTER, because the reentry save area has already been consumed. Move KPROBE_HIT_SS to the recoverable reentry cases and leave KPROBE_REENTER as the unrecoverable nested reentry case. This change also requires saving saved_irqflag in struct prev_kprobe. When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites kcb->saved_irqflag with the currently masked DAIF value, losing the outer kprobe's original DAIF state. Without this fix, when the outer kprobe's single-step finishes, kprobes_restore_local_irqflag() applies the wrong DAIF mask and leaves interrupts permanently disabled. Extend struct prev_kprobe with a saved_irqflag field and save/restore it alongside kp and status. This ensures the outer kprobe's original interrupt state is preserved across reentry. This mirrors the x86 fix in commit 6a5022a56ac3 ("kprobes/x86: Allow to handle reentered kprobe on single-stepping"). | ||||
| CVE-2026-98880 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-98878 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software. | ||||
| CVE-2026-98877 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4. | ||||
| CVE-2026-98876 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels. | ||||
| CVE-2026-115725 | 1 Chatwoot | 1 Chatwoot | 2026-10-23 | 4.2 Medium |
| Chatwoot before 4.17.0 contains an authorization bypass vulnerability that allows authenticated agent bots to access other accounts by supplying a foreign contact inbox source_id. Attackers can call the conversations create endpoint with another account's source_id to create or retrieve conversations and post messages to that account's contacts. | ||||
| CVE-2026-95182 | 1 Deepseek | 1 Deepseek-harness | 2026-10-23 | 10 Critical |
| An untrusted search path in DeepSeek Harness (dsh) commit c291e796 allows attackers to execute arbitrary code via supplying and opening crafted executable files in place of legitimate content. | ||||
| CVE-2026-111444 | 1 Wheels | 1 Wheels | 2026-10-23 | 9.8 Critical |
| Wheels through 4.1.2 allows SQL injection on MySQL/MariaDB with backslash escaping enabled (NO_BACKSLASH_ESCAPES absent) when an application supplies request data to inline-literal paths. These include opt-in parameterize=false queries and IN lists, and positions in developer-written where strings that the parser does not bind, such as BETWEEN bounds, function arguments and LIKE ESCAPE literals. Doubling single quotes without accounting for backslash escapes allows a value to alter the query. Bound paths are not affected; whereBetween() is bound from 4.1.2. This is fixed in 4.2.0. | ||||
| CVE-2026-15222 | 2 Wordpress-extensions, Wpeverest | 2 User Registration & Membership, User Registration & Membership | 2026-10-23 | 5.4 Medium |
| The The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.2.8. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. | ||||
| CVE-2026-92115 | 2 Opajaap, Wordpress-extensions | 2 Wp Photo Album Plus, Wp Photo Album Plus | 2026-10-23 | 8.8 High |
| The WP Photo Album Plus plugin for WordPress is vulnerable to authenticated Command Injection in all versions up to, and including, 9.3.02.002 via the `value` parameter of the `update-photo` AJAX action. This is due to insufficient shell escaping within the `wppa_image_magick_a()` function, where the attacker-controlled `value` parameter is concatenated raw — without `escapeshellarg()` — into an ImageMagick command string before being passed to `exec()`; further, `wppa_decode()` actively restores percent-encoded shell metacharacters (e.g., `%26`→`&`, `%23`→`#`) rather than stripping them, allowing crafted payloads to survive sanitization and break out of the ImageMagick argument context. This makes it possible for authenticated attackers holding the plugin-defined `wppa_upload` capability to execute arbitrary operating-system commands as the web-server user, achieving full remote code execution on the underlying server. Exploitation requires ImageMagick to be enabled on the server; the `wppa_upload` capability is a plugin-level privilege that site administrators may grant to lower-privileged WordPress roles via the plugin's Users settings, broadening the pool of potential attackers beyond administrators. | ||||
| CVE-2026-18223 | 1 Mattermost | 1 Mattermost | 2026-10-23 | 5 Medium |
| Mattermost versions 11.10.x <= 11.10.0, 11.7.x <= 11.7.9, 11.9.x <= 11.9.1, 11.8.x <= 11.8.5 fail to validate the invited recipient's email address when redeeming team and guest invitation tokens, which allows an authenticated attacker to join a team or gain unauthorized access to private channels via a forwarded or leaked invitation link.. Mattermost Advisory ID: MMSA-2026-00747 | ||||
| CVE-2026-109224 | 2 Surecart, Wordpress-extensions | 2 Surecart, Surecart | 2026-10-23 | 7.2 High |
| The SureCart – Ecommerce Made Easy For Selling Physical Products, Digital Downloads, Subscriptions, Donations, & Payments plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 4.9.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful execution requires the affected comment to appear on a post that loads the surecart-components runtime (e.g. via a [sc_buy_button] shortcode) and contains no sc-checkout element, as these conditions trigger the innerHTML sink in sc-cart-loader. | ||||