| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the management and VPN web servers of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability is due to improper validation of user-supplied input on an interface with VPN web services. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on an affected device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.
For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory. |
| A vulnerability in the CLI of Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to read or create a file or overwrite any file on the file system of the underlying operating system of an affected device, including system files.
This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to read or create a file or overwrite any file on the file system of the underlying operating system of the affected device, including system files. To exploit this vulnerability, the attacker must have valid administrative credentials on the affected device. |
| A vulnerability in the Cisco FXOS CLI feature on specific hardware platforms for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to elevate their administrative privileges to root. The attacker would need valid administrative credentials on the device to exploit this vulnerability. This vulnerability exists because certain system configurations and executable files have insecure storage and permissions. An attacker could exploit this vulnerability by authenticating on the device and then performing a series of steps that includes downloading malicious system files and accessing the Cisco FXOS CLI to configure the attack. A successful exploit could allow the attacker to obtain root access on the device. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The Wi-Fi implementation does not verify the Message Integrity Check (authenticity) of fragmented TKIP frames. An adversary can abuse this to inject and possibly decrypt packets in WPA or WPA2 networks that support the TKIP data-confidentiality protocol. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The WEP, WPA, WPA2, and WPA3 implementations accept plaintext frames in a protected Wi-Fi network. An adversary can abuse this to inject arbitrary data frames independent of the network configuration. |
| An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients. |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. |
| A vulnerability in the web interface of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges on an affected system.
This vulnerability is due to the improper transmission of sensitive user information. An attacker could exploit this vulnerability by sending a crafted message to an affected Cisco SSM On-Prem host and retrieving session credentials from subsequent status messages. A successful exploit could allow the attacker to elevate privileges on the affected system from low to administrative.
To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of System User.
Note: This vulnerability exposes information only about users who logged in to the Cisco SSM On-Prem host using the web interface and who are currently logged in. SSH sessions are not affected. |
| A vulnerability in the configuration backup feature of Cisco Nexus Dashboard could allow an attacker who has the encryption password and access to Full or Config-only backup files to access sensitive information.
This vulnerability exists because authentication details are included in the encrypted backup files. An attacker with a valid backup file and encryption password from an affected device could decrypt the backup file. The attacker could then use the authentication details in the backup file to access internal-only APIs on the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. |
| A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access.
This vulnerability is due to improper authorization checks on a REST API endpoint of an affected device. An attacker could exploit this vulnerability by querying the affected endpoint. A successful exploit could allow the attacker to view session information of active Cisco EPNM users, including users with administrative privileges, which could result in the affected device being compromised. |
| A vulnerability in Cisco Nexus Dashboard and Cisco Nexus Dashboard Insights could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by persuading an authenticated user of the device management interface to click a crafted link. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device to an attacker-controlled server. The attacker could then execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| A vulnerability in the Metadata update feature of Cisco Nexus Dashboard Insights could allow an authenticated, remote attacker to write arbitrary files to an affected system.
This vulnerability is due to insufficient validation of the metadata update file. An attacker could exploit this vulnerability by crafting a metadata update file and manually uploading it to an affected device. A successful exploit could allow the attacker to write arbitrary files to the underlying operating system as the root user. To exploit this vulnerability, the attacker must have valid administrative credentials.
Note: Manual uploading of metadata files is typical for Air-Gap environments but not for Cisco Intersight Cloud connected devices. However, the manual upload option exists for both deployments. |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected SSM On-Prem host.
This vulnerability is due to the unintentional exposure of an internal service. An attacker could exploit this vulnerability by sending a crafted request to the API of the exposed service. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. |
| A vulnerability in the change password functionality of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to bypass authentication and gain access to the system as Admin.
This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to bypass authentication, alter the passwords of any user on the system, including an Admin user, and gain access to the system as that user. |
| A vulnerability in the REST API and web UI of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, low-privileged, remote attacker to perform a command injection attack against an affected device.
This vulnerability is due to improper user authorization and insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted commands to an affected REST API endpoint or through the web UI. A successful exploit could allow the attacker to execute arbitrary commands on the CLI of a Cisco NDFC-managed device with network-admin privileges.
Note: This vulnerability does not affect Cisco NDFC when it is configured for storage area network (SAN) controller deployment. |
| A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
