Search

Search Results (429915 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-133493 1 D-link 1 Dir-600l 2026-11-20 10 Critical
A vulnerability was identified in D-Link DIR-600L 2.17b02. Affected is the function genacgi_main of the file gena.cgi of the component GENA Handler. Such manipulation leads to os command injection. The attack can be launched remotely. The exploit is publicly available and might be used.
CVE-2026-43961 2 Redhat, Vim 9 Enterprise Linux, Enterprise Linux Eus, Hummingbird and 6 more 2026-11-20 7.8 High
A flaw was found in Vim's netrw plugin. A crafted filename containing quote characters and expression fragments can break out of the quoted context during mark/unmark operations, allowing arbitrary Vimscript execution. This can be leveraged to run shell commands with the privileges of the user running Vim.
CVE-2026-43974 1 Ninenines 1 Gun 2026-11-20 7.5 High
Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response. In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode. A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM. This issue affects gun: from 2.0.0-pre.1 before 2.4.0.
CVE-2026-104715 2 Red Hat, Redhat 5 Enterprise Linux, Enterprise Linux, Openshift and 2 more 2026-11-20 7.8 High
A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges.
CVE-2026-43973 1 Ninenines 1 Gun 2026-11-20 7.5 High
Uncontrolled Resource Consumption vulnerability in ninenines gun (gun_http module) allows a malicious server to exhaust client memory via unbounded HTTP/1.1 response buffering. In gun_http:handle/5, three clauses accumulate incoming TCP data into the connection's buffer field using binary concatenation with no upper-bound check: the head clause appends data until the \r\n\r\n header terminator is found; the body_chunked clause appends data whenever cow_http_te:stream_chunked/2 returns a more result indicating an incomplete chunk boundary; and the body_trailer clause appends data until the trailing \r\n\r\n is found. In each case, when the expected terminator never arrives, the enlarged binary is stored back into state and the process waits for more data, with no configurable or hard-coded ceiling on buffer size. A malicious or compromised server can exploit this by sending a partial response that never completes. For example, a response may begin with HTTP/1.1 200 OK\r\nX-Pad: followed by an unbounded stream of arbitrary bytes, never sending the header terminator. The gun connection process will continuously append the incoming data to its buffer, causing unbounded heap growth. Because BEAM imposes no per-process heap limit by default, a single malicious connection can exhaust all available memory on the node, causing a node-wide out-of-memory crash. This issue affects gun: from 1.0.0-pre.1 before 2.4.0.
CVE-2026-43972 1 Ninenines 1 Gun 2026-11-20 7.2 High
Origin Validation Error vulnerability in ninenines gun (gun_http2 module) allows cross-origin cookie injection via unvalidated HTTP/2 PUSH_PROMISE authority. In gun_http2:push_promise_frame/7, the :authority pseudo-header from an incoming PUSH_PROMISE frame is stored verbatim into the promised stream record without checking that it matches the connection's origin. When gun_http2:headers_frame/9 later processes the response headers for the promised stream, it calls gun_cookies:set_cookie_header/7 with the unvalidated server-supplied authority before any status branching and before user code can act. This violates RFC 7540 §10.6 / RFC 9113 §8.4, which require receivers to treat as a protocol error any push for a resource the server is not authoritative for. A malicious or compromised HTTP/2 server can plant cookies scoped to arbitrary third-party domains into the client's shared cookie store. This enables session fixation attacks against those domains and, if the planted cookie overrides a legitimate session token, may result in account takeover. No user interaction beyond making a normal HTTP/2 request to the attacker-controlled server is required. This issue affects gun: from 2.0.0-pre.2 before 2.4.0.
CVE-2026-84486 1 Redhat 3 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside 2026-11-20 8.2 High
A flaw was found in Red Hat Ansible Automation Platform's automation- controller. Four debug views that trigger the internal task, dependency, and workflow schedulers are configured to allow any user (including unauthenticated clients) and are routed in production builds because their URL include is not gated on the debug setting. An unauthenticated remote attacker can repeatedly invoke these endpoints to acquire the cluster-wide scheduler advisory lock; because the legitimate scheduler acquires the same lock without waiting, the attacker causes real scheduler runs to be skipped, stalling job dispatch for all tenants, while also consuming controller web workers. The debug root view additionally discloses the list of debug endpoints to unauthenticated callers.
CVE-2026-8469 1 Phenixdigital 1 Phoenix Storybook 2026-11-20 N/A
Allocation of Resources Without Limits or Throttling vulnerability in phenixdigital phoenix_storybook allows unauthenticated denial of service via atom table exhaustion. LiveView event handlers and request parameters of the storybook convert client-supplied strings to atoms. Atoms are never garbage-collected, so a client that sends enough unique strings fills the atom table, and the BEAM node terminates. PhoenixStorybook.ExtraAssignsHelpers.handle_set_variation_assign/3 and handle_toggle_variation_assign/3 call String.to_atom/1 on parameter keys, attribute names, variation ids, and values of attributes declared as :atom or :boolean. PhoenixStorybook.Story.Playground.handle_event/3 and PhoenixStorybook.StoryLive do the same for tab names, theme names, and playground field names. Releases published as phx_live_storybook have the same calls in the PhxLiveStorybook namespace, at first in PhxLiveStorybook.EntryLive. This issue affects phoenix_storybook: from 0.5.0 before 1.1.0; phx_live_storybook: from 0.2.0 onward.
CVE-2026-126759 1 H3c 1 Icg2000 Unified Communication Gateway 2026-11-20 5.3 Medium
A flaw has been found in H3C ICG2000 Unified Communication Gateway 2023. This issue affects some unknown processing of the file /wnm/check.j of the component Web Management Module. Executing a manipulation can lead to missing authentication. The attack may be performed from remote. The exploit has been published and may be used. Upgrading to version R9141PXX is capable of addressing this issue. It is recommended to upgrade the affected component. The vendor confirms: "We have confirmed this issue is a known issue and has been fixed in R9141PXX versions."
CVE-2026-99789 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: restore the iterator when rejecting a misaligned bio bio_iov_iter_get_pages() can extract some iovecs before encountering a misaligned one. It releases the pages and rejects the entire bio, but leaves the supplied iterator advanced. An iomap direct-I/O caller may subsequently reexpand the iterator's byte count and fall back to buffered I/O. The reexpanded count then includes bytes before the iterator's current segment, potentially causing iterate_iovec() to read beyond the imported iovec array. In a reproducer using an initial empty iovec followed by 10-byte and 1015-byte segments, writev() returned 1015 instead of 1025 and KASAN reported an 8-byte read beyond the nine-element iovec allocation. Saving and restoring the iterator on the rejected-bio path makes writev() return 1025 and eliminates the KASAN report. Restore the entire iterator rather than reverting a byte count: advancing past an empty segment changes its position without consuming any bytes. Leave successful and partially accepted bio paths unchanged.
CVE-2026-99788 1 Linux 1 Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Validate FFH register fields before hardware access The x86 CPPC FFH accessors construct masks and shift values using the firmware's Bit Width and Bit Offset without checking that the field fits in an MSR. A zero-width field or a field extending beyond bit 63 can therefore cause an invalid shift. The safe MSR accessors only handle an access fault, not invalid field arithmetic after a successful read. Also, the 64-bit GAS address is implicitly narrowed to the 32-bit MSR number. A descriptor with nonzero upper address bits can access a different MSR from the one described by firmware. The arm64 AMU counter readers have the same unchecked field arithmetic. Validate the field bounds before reading a counter, including both descriptors in the paired counter path. Dispatch FFH accesses before decoding the GAS Access Size in the common read and write paths. Otherwise, a large access_width can trigger an invalid shift in GET_BIT_WIDTH() before the architecture validates its register. That field has architecture-specific FFH semantics and is not needed by the generic memory/port accessor on this path. Validate x86 MSR addresses and share the field-bounds checks between related accessors within each architecture.
CVE-2026-99784 1 Linux 1 Linux Kernel 2026-11-20 4.0 Medium
In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix refcount leak in p9_xen_response() on wrong tag p9_xen_response() looks up the request for an incoming reply with p9_tag_lookup(), which takes a reference on the returned p9_req_t. When the tag does not resolve to a request in REQ_STATUS_SENT, the function warns and continues the loop without dropping that reference, permanently leaking the p9_req_t and its msize buffers. The reply header, including the tag, is supplied by the backend, so a malicious or buggy 9P backend can leak kernel memory on every crafted response. Drop the reference before continuing.
CVE-2026-99780 1 Linux 1 Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: always reset completion when disconnecting When some tx or rx transfers were pending while closing the connection, the completion handler could catch one pending completion call. To ensure a normal start when mounting again, we have to reset the completion and flush any pending completions.
CVE-2026-99777 1 Linux 1 Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: remove bogus context initialization in alloc_requests alloc_requests() initializes usb9pfs->in_req->context to point at the struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites this with the real struct p9_req_t pointer before every transmit, and usb9pfs_tx_complete() clears it back to NULL after each completion, so in_req->context only ever holds a valid p9_req_t once a request has actually been queued. usb9pfs_clear_tx(), however, can run at any time (mount close, gadget disable) independent of whether a request was ever queued. If it runs before the first usb9pfs_transmit(), it reads the leftover sentinel value, type-confuses the struct f_usb9pfs pointer as a struct p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and hands it to p9_client_cb(), which manipulates req->wq and req->refcount at bogus offsets inside f_usb9pfs. This reliably corrupts memory or panics whenever the transport is torn down before any 9p request has been transmitted, e.g. mounting and immediately unmounting, or a cable disconnect racing the very first request. usb9pfs->out_req->context is set the same way but is never read by this transport (usb9pfs_rx_complete() identifies the instance via ep->driver_data instead), so it serves no purpose either. Both endpoints' ->driver_data are already set to usb9pfs in enable_endpoint(), which is what the completion handlers actually use to recover the f_usb9pfs instance. Just drop the leftover ->context assignments; usb_ep_alloc_request()/alloc_ep_req() already return zeroed requests, so in_req->context correctly starts out NULL.
CVE-2026-99770 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Publish the output fence outside of job_lock job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe lock under it creates an inversion. drm_syncobj_replace_fence() takes drm_syncobj::lock, which other paths acquire with interrupts enabled. For example, a thread interrupted while holding it blocks the handler on job_lock, and the handler can only make progress once the submit path releases job_lock, which it cannot do while waiting for drm_syncobj::lock. This is reported by lockdep: [ 188.139076] ======================================================== [ 188.139086] WARNING: possible irq lock inversion dependency detected [ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C [ 188.139108] -------------------------------------------------------- [ 188.139116] swapper/0/0 just changed the state of lock: [ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4] [ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past: [ 188.139242] (&syncobj->lock){+.+.}-{3:3} [ 188.139256] and interrupts could create inverse lock ordering between them. [ 188.139267] other info that might help us debug this: [ 188.139275] Possible interrupt unsafe locking scenario: [ 188.139284] CPU0 CPU1 [ 188.139291] ---- ---- [ 188.139299] lock(&syncobj->lock); [ 188.139312] local_irq_disable(); [ 188.139320] lock(&vc4->job_lock); [ 188.139335] lock(&syncobj->lock); [ 188.139350] <Interrupt> [ 188.139358] lock(&vc4->job_lock); [ 188.139372] *** DEADLOCK *** Hand the fence over after job_lock is dropped. The job can complete and drop exec->fence in that window, so take a reference first and publish through the local pointer, as exec may already be gone.
CVE-2026-99769 1 Linux 1 Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Drop the BO reservations outside of job_lock vc4_queue_submit() calls drm_exec_fini() with job_lock held and interrupts disabled. Besides unlocking the reservations, drm_exec_fini() frees the object array with kvfree(), which asks for preemptible task context or a non-NMI interrupt, and may reach might_sleep() through vfree(). Considering that an array that exceeds a page can take the vmalloc fallback, call drm_exec_fini() once job_lock is dropped. The reservations are then held across the job kick, which is harmless as nothing in the completion path takes a BO reservation. Note that vc4_attach_fences() has to stay inside the critical section, as it walks exec, which the job done worker is free to release as soon as job_lock is dropped.
CVE-2026-99765 1 Linux 1 Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix demo-mode dynamic ACL dev-entry UAF vs LUN teardown A demo-mode (generate_node_acls=1) login that allocates a dynamic NodeACL populates that ACL's per-LUN dev entries in core_tpg_add_node_to_devs() *before* the ACL is linked onto tpg->acl_node_list by target_add_node_acl(): core_tpg_check_initiator_node_acl(): ... core_tpg_add_node_to_devs(acl, tpg, NULL); /* builds deves */ target_add_node_acl(acl); /* only now listed */ The LUN teardown sweep, core_clear_lun_from_tpg(), enumerates only tpg->acl_node_list, so a dev entry whose ACL is still in the window above is invisible to the sweep and is never disabled. It is left on the se_lun->lun_deve_list after core_tpg_remove_lun() frees the se_lun; when the same unpacked_lun is later re-added and the se_lun is reallocated at the same address, the stale dev entry is rediscovered by target_nacl_find_deve() and core_enable_device_list_for_node() corrupts lun_deve_list: BUG: KASAN: slab-use-after-free ... core_enable_device_list_for_node+0x5ce/0x880 core_tpg_add_node_to_devs+0x169/0x190 core_dev_add_lun+0x146/0x190 target_fabric_port_link+0xe9/0x1b0 configfs_symlink+0x381/0xae0 __x64_sys_symlink+0x55/0x80 The demo-mode login path that drives the ACL/dev-entry creation is reachable by an unauthenticated initiator; the colliding LUN add/remove is a local configfs operation. Commit 49cb77e297dc ("target: Avoid mappedlun symlink creation during lun shutdown") introduced se_lun->lun_shutdown and guarded the *explicit* ACL MappedLUN path (target_fabric_mappedlun_link()), but the demo-mode automatic path, core_tpg_add_node_to_devs() -> core_enable_device_list_for_node(), was never given the equivalent guard, and the publish-after-populate ordering in core_tpg_check_initiator_node_acl() was left unchanged. Fix it in three cooperating parts: 1) Publish the dynamic NodeACL onto acl_node_list *before* creating its dev entries, so the teardown sweep can observe them. 2) Refuse to attach a dev entry to an se_lun that is shutting down, checked under nacl->lun_entry_mutex -- the same lock the sweep takes -- so once the sweep has passed an ACL any later enable for that LUN observes lun_shutdown and skips it. 3) In core_enable_device_list_for_node(), insert the new dev entry onto lun->lun_deve_list while still holding nacl->lun_entry_mutex, in both the replace and the new-entry branch. Previously the entry was added to nacl->lun_entry_hlist under the mutex but to lun->lun_deve_list only after dropping it; with the ACL now published early, the sweep could take the mutex in that gap, find the entry on the hlist, core_disable_device_list_for_node() it (list_del() on the not-yet- linked lun_link succeeds and the entry is freed), and then the enable would list_add_tail() the freed entry back onto lun_deve_list. Linking both lists under the mutex makes enable and the sweep mutually exclusive, closing that window. core_tpg_add_node_to_devs() already ignores the return value of core_enable_device_list_for_node(), so a shutting-down LUN is simply skipped.
CVE-2026-99760 1 Linux 1 Linux Kernel 2026-11-20 4.3 Medium
In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: ignore ROAM flag of received ADD changes A received TT change (OGM diff or full table response) with the ROAM flag but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV: * a newly created global entry gets BATADV_TT_CLIENT_ROAM and is therefore excluded from the global CRC. The sender has it in its local CRC and the receiver has to request the full table again * batadv_tt_global_purge_local() removes the local entry of the receiver. The receiver's own client is considered as roamed to the sender and frames for it are rerouted The ROAM flag only has a meaning together with DEL. Drop it on reception to keep it from populating the global table with a temporary ROAMING entry which is not part of the CRC - and therefore causing a CRC mismatch.
CVE-2026-99753 1 Linux 1 Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/loongson: Fix double free on BO initialization failure If ttm_bo_init_validate() fails, it drops the buffer object's reference and cleans it up through the supplied destroy callback. lsdc_bo_destroy() releases the GEM object and frees the enclosing lsdc_bo, so freeing it again in lsdc_bo_create() causes a double free on a synchronous failure path. Let TTM own the cleanup after initialization has started and return the error directly. Keep the explicit free on drm_gem_object_init() failure, which occurs before ownership is passed to TTM. Tested on LS7A2000 by making drm_vma_offset_add() return -ENOSPC for one selected dumb-buffer creation. The error reached userspace, the destroy callback ran once, and no handle was published or tracked BO retained. Normal buffer creation, zeroing, mapping, readback and release passed. AI assistance was used for the ownership analysis, fix, fault-injection tools, build and test execution.
CVE-2026-99745 1 Linux 1 Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Select the BHI mitigation based on the attack vector properly The BHI mitigation selection is inconsistent with the documentation (attack_vector_controls.rst), which lists BHI under both the user->kernel and guest->host attack vectors. bhi_select_mitigation() only enables it when CPU_MITIGATE_GUEST_HOST is set; otherwise it selects BHI_MITIGATION_OFF, even if CPU_MITIGATE_USER_KERNEL is set. As a result, a kernel compiled with KVM disabled gets BHI automatically disabled, since CPU_MITIGATE_GUEST_HOST defaults to off without KVM. This is a bug, given that CPU_MITIGATE_USER_KERNEL still needs it: on affected Intel CPUs these kernels lose BHI_DIS_S or the BHB clearing loop by default. Booting with mitigations=auto,no_guest_host has the same effect. Select BHI_MITIGATION_ON whenever user->kernel is mitigated, and keep BHI_MITIGATION_VMEXIT_ONLY for the guest->host-only case. [ bp: Clarify commit title. ]