| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mitigation bypass in the DOM: Security component. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
| To allow builds of Python to be run from an in-tree layout (rather than
an installed file layout), the VPATH variable is defined at build time
and used to locate certain landmarks - specifically,
Modules/setup.local. When this landmark is found relative to VPATH
relative to the executable, Python assumes it is running in a source
tree and generates a different default sys.path. This code remains in
release builds, so that release-ready builds can be built in-tree.
On Windows, since builds are written to 'PCbuild/', the value of
VPATH is set to '..\..', which results in a landmark of
'..\..\Modules\setup.local'. This path is outside the install directory
of Python, and may have different permissions, potentially allowing a
low-privilege user to create the landmark and an alternative `Lib`
folder that will be discovered by an otherwise restricted install.
Such a setup occurs with the legacy default install location for all
users (in the now superseded EXE installer), due to how Windows allows
all users to create folders in the root directory of their OS drive.
Our recommended mitigation on Windows is to migrate away from the
legacy installer and use the new [Python install
manager](https://www.python.org/downloads/latest/pymanager/) to install
for the current user. Installs where the directory two levels above the
Python installation directory have equivalent permissions are unaffected
(in general, a per-user install cannot be modified at all by other
users, removing any escalation of privilege risk, and could be directly
modified by a privileged user, making the potential tampering
irrelevant). Alternative mitigations might include preemptively creating
and restricting access to a `Modules` directory. Be aware that only 3.13
and 3.14 will receive updated legacy installers - earlier fixes are only
provided as sources.
Platforms other than Windows allow VPATH to be overridden, but as they
don't usually use a separated directory in the build for binaries, are
unlikely to have a landmark reference outside of the install directory.
The landmark detection involving VPATH is a fallback for when a more
specific landmark - .\pybuilddir.txt - is absent, and was included for
compatibility. Future releases of Python will no longer include the
fallback, and so builds will need to generate or preserve the
pybuilddir.txt file in order to work in-tree. This landmark file has
been generated on Windows since 3.11, and on other platforms for longer. |
| OpenClaw before 2026.5.12 contains a notification bypass vulnerability allowing Slack reaction events to enter the agent pipeline despite disabled reaction notifications. Attackers can trigger unintended agent processing by sending reaction events when the feature is enabled, potentially leading to unauthorized processing of lower-trust input. |
| OpenClaw before 2026.5.3 contains a policy enforcement vulnerability where Zalo contacts with mutable display metadata could match allowFrom policy entries through display name changes. Attackers with mutable display names could receive agent responses intended for different Zalo identities when the feature is enabled. |
| In OpenStack Ironic 32 before 37.0.0, an unauthenticated malicious user could submit a crafted JSON string to some endpoints on the API or JSON-RPC service and effect a service crash. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_rewrite_module module. This vulnerability exists when a rewrite directive uses a regex pattern with distinct, overlapping Perl-Compatible Regular Expression (PCRE) captures (for example, ^/((.*))$) and a replacement string that references multiple such captures (for example, $1$2) in a redirect or arguments context. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| FreeRDP before 3.26.0 contains a heap-buffer-overflow vulnerability in gdi_CacheToSurface that allows remote attackers to write out-of-bounds heap memory. The vulnerability occurs because rectangle validation clamps coordinates to UINT16_MAX but performs copy operations using unclamped cache entry dimensions, enabling malicious RDP servers to trigger large out-of-bounds writes and potentially achieve remote code execution or client crash. |
| A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Spring Data Commons applications may be vulnerable to denial of service through resource exhaustion when attacker-controlled property path strings are passed to MappingContext property path resolution.
Affected versions:
Spring Data Commons 4.0.0 through 4.0.5; 3.5.0 through 3.5.11; 3.4.0 through 3.4.14. |
| LangGraph Python SDK is used to connect to running LangGraph API servers, manage assistants, threads and stream runs from Python applications. Versions 0.3.14 and prior have unsafe URL path construction through unsanitized caller-supplied identifier values used in HTTP request paths for resource operations. Without sanitization of those values, identifiers that contain characters with special meaning in URL paths could cause the resulting request to address a different resource (and potentially a different resource type) than the SDK method's call site indicates. In deployments where the SDK receives identifier values that originate from untrusted sources, this could result in unintended access, modification, or deletion of resources beyond the calling user's authorization scope. This issue is most consequential in deployments that forward end-user-supplied values directly into SDK identifier parameters without first validating them against an expected format (such as a UUID), and rely on URL-prefix-based authorization at an upstream layer (reverse proxy, edge gateway, WAF), where the authorization decision is made on the SDK call's intended path rather than on the final delivered request path. The issue has been fixed in version 0.3.15. |
| OpenClaw before 2026.5.26 contains a hostname validation vulnerability allowing attackers to bypass blocklist comparisons using trailing-dot notation in model or workspace-derived URLs. Attackers can exploit inconsistent hostname checks to reach destinations that operators intended to block through hostname policies. |
| OpenClaw before 2026.5.2 contains a path traversal vulnerability in maintenance task execution that allows workspace-derived service paths to influence trash command selection. Attackers can execute unintended local executables from operator-unintended paths during maintenance operations by manipulating workspace-derived environment paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_qfq: Fix null-deref in agg_dequeue
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, mbstream did not check for /../ in the path when unpacking the archive. A proper backup can never contain such paths, but a specially crafted archive could have caused mbstream to create files outside of the target-dir path. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. |
| OpenTelemetry-cpp is the C++ implementation of OpenTelemetry. Prior to release 1.27.0, the OTLP HTTP exporters (traces/metrics/logs) read the full HTTP response into an in-memory vector of bytes without a size cap. This is exploitable for memory exhaustion when the configured collector endpoint is attacker-controlled (or a network attacker can MITM the exporter connection). This vulnerability is fixed in opentelemetry-cpp release 1.27.0. |
| MariaDB server is a community developed fork of MySQL server. In versions 3.3.18 and 3.4.8, an application that was taking non-validated user input, escaping it with mysql_real_escape_string() and sending it to the database using text protocol and big5 character set was vulnerable to SQL injections, even though mysql_real_escape_string() was supposed to prevent them. This issue has been patched in versions 3.3.19 and 3.4.9. |
| A vulnerability in SQL Expressions allows an authenticated attacker to read arbitrary files from the Grafana server's filesystem. Only instances with the sqlExpressions feature toggle enabled are vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix improper freeing of purex item
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
