| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
parport: Fix race between port and client registration
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Check PSC request indices against the actual size of the buffer
When processing Page State Change (PSC) requests, validate the PSC buffer
against the effective size of the scratch area, which could be less than
the maximum size if the guest provided a pointer that isn't exactly at the
start of the GHCB shared buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
Use READ_ONCE() when reading entries/indices from the guest-accessible
Page State Change buffer to defend against TOCTOU bugs.
Don't bother with READ_ONCE()/WRITE_ONCE() for cases where KVM is writing
(and not consuming the result!), as the guest isn't supposed to touch the
buffer while it's being processed. I.e. using READ_ONCE() is all about
protecting against misbehaving guests. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: fix replay protection at XPN lower-PN wrap
In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0
and the first branch never fires. If next_pn_halves.lower is also in the
upper half, pn_same_half(pn, lower) is true and the XPN else-if does not
fire either, leaving next_pn_halves unchanged. An attacker that captures
the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association
can then replay it indefinitely, since lowest_pn never rises above
the captured pn and macsec_decrypt() reconstructs the same IV.
Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt
of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers.
Let's recompute nh pointer to make sure any change won't mess things up. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().
After patch 1/2 in this series, vti6_update() unlinks and relinks
the tunnel through t->net. vti6_siocdevprivate() still uses
dev_net(dev) for the collision lookup. For a tunnel moved through
IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net.
SIOCCHGTUNNEL on a migrated tunnel then runs:
net = dev_net(dev) /* migrated netns */
t = vti6_locate(net, &p1, false) /* misses target in t->net */
...
t = netdev_priv(dev)
vti6_update(t, &p1, false) /* mutates t->net's hash */
A caller in the migrated netns picks params that match a tunnel
in the creation netns. The lookup in dev_net(dev) finds nothing.
vti6_update() prepends the migrated tunnel at the head of the
creation netns hash bucket for those params. Later lookups in
the creation netns resolve to the migrated device. xfrm receive
delivers the matched packets through a device the caller controls.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts.
Switch the SIOCCHGTUNNEL path on a non fallback device to use
t->net for the lookup. The lookup now matches the netns
vti6_update() operates on.
Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before
the lookup. The check at the top of the case is against
dev_net(dev)->user_ns, which after migration is the attacker's
netns. A caller there can pick params absent from self->net,
the lookup returns NULL, t becomes self, and vti6_update()
inserts the device into the creation netns hash. The new check
requires CAP_NET_ADMIN in the creation netns user_ns too.
SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep
dev_net(dev), which equals init_net there. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: input: hold netns during deferred transport reinjection
Transport-mode reinjection stores a struct net pointer in skb->cb and
uses it later from xfrm_trans_reinject(). That pointer must stay valid
until the deferred callback runs.
Take a netns reference when queueing deferred reinjection work and drop
it after the callback completes. Use maybe_get_net() so the queueing
path does not revive a namespace that is already being torn down.
This keeps the existing workqueue design and fixes the netns lifetime
handling in one place for all users of xfrm_trans_queue_net(). |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: route MIGRATE notifications to caller's netns
xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()
in net/key/af_key.c both hardcode &init_net for the multicast that
announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.
XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the
rest of the xfrm/af_key netlink path was made netns-aware in 2008.
The other 14 multicast paths in xfrm_user.c route their event using
xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path
was missed.
Two consequences of the init_net hardcoding:
1. The notification (selector, old/new endpoint addresses, and the
km_address) is delivered to listeners on init_net's
XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on
the issuing netns. An IKE daemon running in init_net therefore
receives migration notifications originating from any other
netns on the host.
2. An IKE daemon running inside a non-init netns and subscribed
to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the
notification of its own migration. IKEv2 MOBIKE / address-update
handling inside a netns is silently broken.
Thread struct net through km_migrate() and the xfrm_mgr.migrate
function pointer, drop the &init_net override in xfrm_send_migrate()
and pfkey_send_migrate(), and pass the caller's net (already in
scope in xfrm_migrate() via sock_net(skb->sk)) all the way down.
struct xfrm_mgr is in-tree only and not exported as a stable API,
so the function-pointer signature change is internal.
pfkey_broadcast() is already netns-aware via net_generic(net,
pfkey_net_id) since the pernet conversion. The five other
pfkey_broadcast() callers in af_key.c already pass xs_net(x),
sock_net(sk) or a per-netns net, so this only removes the
&init_net outlier. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Commit d07b26f39246 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: serialize DMABUF cancel against request completion
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root. |
